BS-EN-ISO-10545-5-1998.pdf
《BS-EN-ISO-10545-5-1998.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-10545-5-1998.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 10545-5:1998 Incorporating Technical Corrigendum 1:1996 Ceramic tiles Part 5: Determination of impact resistance by measurement of coefficient of restitution The European Standard EN ISO 10545-5:1997 has the status of a British Standard ICS 91.100.20 Licensed Copy: sheffie
2、ldun sheffieldun, na, Mon Nov 20 03:09:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 10545-5:1998 This British Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 March 1998
3、 BSI 04-1999 ISBN 0 580 28993 1 National foreword This British Standard is the English language version of EN ISO 10545-5:1997 Ceramic tiles Part 5: Determination of impact resistance by measurement of coefficient of restitution. It is a new test and does not supersede a Part of BS 6431. This Part i
4、s referred to in the specification for ceramic tiles, ISO 13006, which includes requirements for all the tiles standardized in BS 643-1 to BS 643-9. The UK participation in its preparation was entrusted to Technical Committee B/539, Ceramic tiles and other rigid tiling, which has the responsibility
5、to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of org
6、anizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Stand
7、ards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standa
8、rd does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN ISO title page, page 2, the ISO title page, page ii, pages 1 to 4, an inside back cover and a back cover. This standard has been updated
9、 (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 03:09:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
10、 BS EN ISO 10545-5:1998 BSI 04-1999i Contents Page National forewordInside front cover Foreword2 Forewordii Text of ISO 10545-51 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 03:09:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20
11、03:09:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10545-5 September 1997 ICS 91.100 Descriptors: See ISO document English version Ceramic tiles Part 5: Determination of impact resistance by measurement of coefficient of restitution (ISO 1054
12、5-5:1996, including Technical Corrigendum 1:1996) Carreaux et dalles cramiques Partie 5: Dtermination de la rsistance au choc par mesurage du coefficient de restitution (ISO 10545-5:1996, Rectificatif Technique 1:1996 inclus) Keramische Fliesen und Platten Teil 5: Bestimmung der Schlagfestigkeit dur
13、ch Messung des Rckprallkoeffizienten (ISO 10545-5:1996, einschlielich Technische Korrektur 1:1996) This European Standard was approved by CEN on 1997-08-23. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the
14、status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German).
15、A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland
16、, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Bruss
17、els 1997 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10545-5:1997 E Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 03:09:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 10545-5:1997 BSI 04-1999 2 Foreword The t
18、ext of the International Standard from Technical Committee ISO/TC 189 “Ceramic tiles” of the International Organization for Standardization (ISO) has been taken over as an European Standard by Technical Committee CEN/TC 67 “Ceramic tiles”, the secretariat of which is held by UNI. EN ISO 10545 consis
19、ts of the following parts, under the common title, “Ceramic tiles”: Part 1: Sampling and basis for acceptance; Part 2: Determination of dimensions and surface quality; Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density; Part 4: Determination of m
20、odulus of rupture and breaking strength; Part 5: Determination of impact resistance by measurement of coefficient of restitution; Part 6: Determination of resistance to deep abrasion for unglazed tiles; Part 7: Determination of resistance to surface abrasion for glazed tiles; Part 8: Determination o
21、f linear thermal expansion; Part 9: Determination of resistance to thermal shock; Part 10: Determination of moisture expansion; Part 11: Determination of crazing resistance for glazed tiles; Part 12: Determination of frost resistance; Part 13: Determination of chemical resistance; Part 14: Determina
22、tion of resistance to stains; Part 15: Determination of lead and cadmium given off by glazed tiles; Part 16: Determination of small colour differences; Part 17: Determination of coefficient of friction. This European Standard shall be given the status of a national standard, either by publication of
23、 an identical text or by endorsement, at the latest by March 1998, and conflicting national standards shall be withdrawn at the latest by March 1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europea
24、n Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the International Standard ISO 10545-5:1996, including Techni
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 10545 1998
链接地址:https://www.31doc.com/p-3743962.html