BS-EN-61196-3-3-1998 IEC-61196-3-3-1997.pdf
《BS-EN-61196-3-3-1998 IEC-61196-3-3-1997.pdf》由会员分享,可在线阅读,更多相关《BS-EN-61196-3-3-1998 IEC-61196-3-3-1997.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61196-3-3:1998 IEC 61196-3-3: 1997 Radio frequency cables Part 3-3: Coaxial cables for digital communication in horizontal floor wiring Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s The European Standard
2、 EN 61196-3-3:1997 has the status of a British Standard ICS 33.120.10 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 12:56:22 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61196-3-3:1998 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board,
3、was published under the authority of the Standards Board and comes into effect on 15 February 1998 BSI 04-1999 ISBN 0 580 29117 0 National foreword This British Standard is the English language version of EN 61196-3-3:1997. It is identical with IEC 61196-3-3:1997. The UK participation in its prepara
4、tion was entrusted by Technical Committee EPL/46, Cables, wires, waveguides, RF connectors, and accessories for communication and signalling, to Subcomittee EPL/46/1, LF communication cables and wires, which has the responsibility to: aid enquirers to understand the text; present to the responsible
5、international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on reques
6、t to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both s
7、ystems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement international or European publications
8、 may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of Briti
9、sh Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 7 and a back cover. T
10、his standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 12:56:22 GMT+00:00 200
11、6, Uncontrolled Copy, (c) BSI BS EN 61196-3-3:1998 BSI 04-1999i Contents Page National forewordInside front cover Foreword2 Text of EN 61196-3-33 Figure 1 Maximum transfer impedance7 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 12:56:22 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank L
12、icensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 12:56:22 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61196-3-3 November 1997 ICS 33.120.10 English version Radio frequency cables Part 3-3: Coaxial cables for digital communication in horizontal
13、 floor wiring Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-3:1997) Cbles pour frquences radiolectriques Partie 3-3: Cbles caoxiaux pour transmission numrique dstins au cblage horizontal des immeubles Spcification
14、 particulire pour les cbles coaxiaux avec dilectrique expans pour rseaux locaux jusqu 185 m, et de dbit maximal 10 Mb/s (CEI 61196-3-3:1997) Hochfrequenzkabel Teil 3-3: Koaxialkabel fr Etagenverkabelung in der digitalen Kommunikation Bauartspezifikation fr Koaxialkabel mit geschumtem Dielektrikum fr
15、 lokale Netze mit 185 m Reichweite und bis 10 Mb/s (IEC 61196-3-3:1997) This European Standard was approved by CENELEC on 1997-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nationa
16、l standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in a
17、ny other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Fi
18、nland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische
19、Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1997 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61196-3-3:1997 E Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 12:56:22 GMT+00:00 2006, Uncontrolled Copy
20、, (c) BSI EN 61196-3-3:1997 2 BSI 04-1999 Foreword The text of document 46A/290/FDIS, future edition 1 of IEC 61196-3-3, prepared by SC 46A, Coaxial cables, of IEC TC 46, Cables, wires, waveguides, R.F. connectors, and accessories for communication and signalling, was submitted to the IEC-CENELEC pa
21、rallel vote and was approved by CENELEC as EN 61196-3-3 on 1997-10-01. The following dates were fixed: Endorsement notice The text of the International Standard IEC 61196-3-3:1997 was approved by CENELEC as a European Standard without any modification. latest date by which the EN has to be implement
22、ed at national level by publication of an identical national standard or by endorsement(dop) 1998-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 1998-07-01 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 12:56:22 GMT+00:00 2006, Uncontrolle
23、d Copy, (c) BSI EN 61196-3-3:1997 BSI 04-19993 1 Elabor par/ Prepared by: SC46A/WG3 2 Document No: Indice/Issue Date: CEI/IEC 61196-3-3 Mars/March 1997 3 Disponible / Available from: : 4 Spcification gnrique/ Generic specificationCEI/IEC 61196-1 Spcification intermdiaire/ Sectional specificationCEI/
24、IEC 61196-3 Spcification particulire/ Detail specificationCEI/IEC 61196-3-3 5 Rfrences complmentaires/Additional references: Les cbles satisfaisant cette spcification sont compatibles avec la connectique et les performances exiges par le systme dans les applications 10 BASE 2 dcrites dans lISO/CEI 8
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-61196-3-3-1998 IEC-61196-3-3-1997 BS EN 61196 1998 IEC 1997
链接地址:https://www.31doc.com/p-3744250.html