BS-EN-60352-5-2001 IEC-60352-5-2001.pdf
《BS-EN-60352-5-2001 IEC-60352-5-2001.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60352-5-2001 IEC-60352-5-2001.pdf(40页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60352-5:2001 IEC 60352-5:2001 Incorporating Amendment No. 1 Solderless connections Part 5: Press-in connections General requirements, test methods and practical guidance The European Standard EN 60352-5:2001, with the incorporation of amendment A1:2003, has the status of a Bri
2、tish Standard ICS 31.220.10 ? Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 10:27:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60352-5:2001 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published unde
3、r the authority of the Standards Policy and Strategy Committee on 26 November 2001 BSI 12 March 2004 ISBN 0 580 38714 3 National foreword This British Standard is the official English language version of EN 60352-5:2001, including amendment A1:2003. It is identical with IEC 60352-5:2001, Edition 2.1
4、:2003 which comprises Edition 2:2001 consolidated by the incorporation of amendment 1:2003. It supersedes BS EN 60352-5:1995 which will be withdrawn on 2004-04-01. The UK participation in its preparation was entrusted by Technical Committee EPL/48, Electromechanical components for electronic equipme
5、nt, to Subcommittee EPL/48/2, Connectors for electronic equipment, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications refe
6、rred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provi
7、sions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals
8、for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 36, an inside back cover and a back cover. The BSI copyr
9、ight date displayed in this document indicates when the document was last issued. Sidelining in this document indicates the most recent changes by amendment. Amendments issued since publication Amd. No. DateComments 1500912 March 2004Indicated by a sideline Licensed Copy: sheffieldun sheffieldun, na
10、, Fri Nov 10 10:27:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60352-5 April 2001 + A1 December 2003 ICS 31.220.10Supersedes EN 60352-5:1995 English version Solderless connections Part 5: Press-in connections General requirements, test methods a
11、nd practical guidance (includes amendment A1:2003) (IEC 60352-5:2001 + A1:2003) Connexions sans soudure Partie 5: Connexions insres force Rgles gnrales, mthodes dessai et guide pratique (inclut lamendement A1:2003) (CEI 60352-5:2001 + A1:2003) Ltfreie Verbindungen Teil 5: Einpressverbindungen Allgem
12、eine Anforderungen, Prfverfahren und Anwendungshinweise (enthlt nderung A1:2003) (IEC 60352-5:2001 + A1:2003) This European Standard was approved by CENELEC on 2001-04-01; amendment A1 was approved by CENELEC on 2003-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulation
13、s which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This Eur
14、opean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are
15、 the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee
16、 for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 2001 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
17、 Ref. No. EN 60352-5:2001 + A1:2003 E Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 10:27:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 06253:5-2001 Foreword The text of document 48B/978/FDIS, future edition 2 of IEC 60352-5, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanica
18、l components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60352-5 on 2001-04-01. This European Standard supersedes EN 60352-5:1995. The following dates were fixed: Annexes designated “normative” are part of the b
19、ody of the standard. In this standard, Annex A and Annex ZA are normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 60352-5:2001 was approved by CENELEC as a European Standard without any modification. In the official version, the following no
20、te has to be added for the standard indicated: Foreword to amendment A1 The text of document 48B/1367/FDIS, future amendment 1 to IEC 60352-5:2001, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-
21、CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60352-5:2001 on 2003-12-01. The following dates were fixed: Endorsement notice The text of amendment 1:2003 to the International Standard IEC 60352-5:2001 was approved by CENELEC as an amendment to the European Standard without
22、any modification. latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 2002-01-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 2004-04-01 IEC 60249-2-1NOTEHarmonize
23、d with A1:1989 as HD 313.2.1 S2:1990 (not modified). latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 2004-09-01 latest date by which the national standards conflicting with the amendment have to be wit
24、hdrawn(dow) 2006-12-01 Page 2 EN 603525:2001 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 10:27:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI CONTENTS Page INTRODUCTION.4 1 Scope and object5 2 Normative references5 3 Definitions.7 4 Requirements .8 4.1 General8 4.2 Tools8 4.3 Press-in term
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-60352-5-2001 IEC-60352-5-2001 BS EN 60352 2001 IEC
链接地址:https://www.31doc.com/p-3744361.html