BS-EN-60384-3-2006.pdf
《BS-EN-60384-3-2006.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60384-3-2006.pdf(32页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60384-3:2006 Fixed capacitors for use in electronic equipment Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte The European Standard EN 60384-3:2006 has the status of a British Standard ICS 31.060.40
2、 ? Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 07:56:26 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 60384-3:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2007 BSI 2007 ISBN 978
3、 0 580 50217 0 National foreword This British Standard was published by BSI. It is the UK implementation of EN 60384-3:2006. It is identical with IEC 60384-3:2006. It supersedes BS CECC 30800:1991, BS EN 130800:2001 and BS QC 300800:1991, which are withdrawn. The UK participation in its preparation
4、was entrusted to Technical Committee EPL/40X, Capacitors and resistors for electronic equipment. A list of organizations represented on EPL/40X can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible
5、for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 07:56:26 GMT+00:00 2007, Uncontrolled Copy, (
6、c) BSI EUROPEAN STANDARD EN 60384-3 NORME EUROPENNE EUROPISCHE NORM December 2006 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussel
7、s 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60384-3:2006 E ICS 31.060.40 English version Fixed capacitors for use in electronic equipment Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capaci
8、tors with manganese dioxide solid electrolyte (IEC 60384-3:2006) Condensateurs fixes utiliss dans les quipements lectroniques Partie 3: Spcification intermdiaire: Condensateurs fixes lectrolytiques au tantale pour montage en surface lectrolyte solide en bioxyde de manganse (CEI 60384-3:2006) Festkon
9、densatoren zur Verwendung in Gerten der Elektronik Teil 3: Rahmenspezifikation: Oberflchenmontierbare Tantal-Kondensatoren mit festem Mangandioxid-Elektrolyt (IEC 60384-3:2006) This European Standard was approved by CENELEC on 2006-11-01. CENELEC members are bound to comply with the CEN/CENELEC Inte
10、rnal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC m
11、ember. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENE
12、LEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia
13、, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 07:56:26 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 60384-3:2006 2 Foreword The text of document 40/1771/FDIS, future edition 3 of IEC 60384-3, prepared by IE
14、C TC 40, Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60384-3 on 2006-11-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical natio
15、nal standard or by endorsement (dop) 2007-08-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2009-11-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60384-3:2006 was approved by CENELEC as a Euro
16、pean Standard without any modification. _ Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 07:56:26 GMT+00:00 2007, Uncontrolled Copy, (c) BSI 3 EN 60384-3:2006 CONTENTS 1 General5 1.1 Scope5 1.2 Object .5 1.3 Normative references 5 1.4 Information to be given in
17、 a detail specification 5 1.5 Terms and definitions 6 1.6 Marking.7 2 Preferred ratings and characteristics.8 2.1 Preferred characteristics8 2.2 Preferred values of ratings.9 3 Quality assessment procedures 10 3.1 Primary stage of manufacture 10 3.2 Structurally similar components .10 3.3 Certified
18、records of released lots10 3.4 Qualification approval 10 3.5 Quality conformance inspection .11 4 Test and measurement procedures .12 4.1 Preliminary drying12 4.2 Measuring conditions.12 4.3 Mounting .12 4.4 Visual examination and check of dimensions13 4.5 Electrical tests.13 4.6 Resistance to solde
19、ring heat14 4.7 Solderability 15 4.8 Shear test .15 4.9 Substrate bending test.16 4.10 Rapid change of temperature.16 4.11 Climatic sequence (applicable to Style 1 capacitors only) .16 4.12 Damp heat, steady state (applicable to Style 1 capacitors only) 17 4.13 Characteristics at high and low temper
20、ature.17 4.14 Surge 17 4.15 Endurance.18 4.16 Reverse voltage (if required by the detail specification) 18 4.17 Component solvent resistance (if required by the detail specification).19 4.18 Solvent resistance of the marking (if required by the detail specification) 19 4.19 High surge current (if re
21、quired by the detail specification).19 Annex A (normative) Test plans for assessment level EZ20 Annex B (normative) Test schedule for assessment level EZ 23 Annex ZA (normative) Normative references to international publications with their corresponding European publications29 Licensed Copy: London
22、South Bank University, London South Bank University, Thu Mar 01 07:56:26 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 60384-3:2006 4 Table 1 Category voltages .9 Table 2 Test temperatures .18 Table A.1 Test plan for qualification approval Assessment level EZ20 Table A.2 Test plan for quality confor
23、mance inspection Lot-by-lot tests Assessment level EZ 21 Table A.3 Test plan for quality conformance inspection Periodic tests Assessment level EZ 22 Table B.1 Test schedule for qualification approval Assessment level EZ.23 Licensed Copy: London South Bank University, London South Bank University, T
24、hu Mar 01 07:56:26 GMT+00:00 2007, Uncontrolled Copy, (c) BSI 5 EN 60384-3:2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte 1 General 1.1 Scope This specification appli
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 60384 2006
链接地址:https://www.31doc.com/p-3744362.html