BS-EN-60603-5-1998 IEC-60603-5-1987.pdf
《BS-EN-60603-5-1998 IEC-60603-5-1987.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60603-5-1998 IEC-60603-5-1987.pdf(40页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60603-5:1998 IEC 60603-5: 1987 Connectors for frequencies below 3 MHz for use with printed boards Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing The European Standard EN 60603-5:1998 has the status of a Brit
2、ish Standard ICS 31.220.10 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 06:57:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60603-5:1998 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Stan
3、dards Board and comes into effect on 15 May 1998 BSI 05-1999 ISBN 0 580 29300 9 National foreword This British Standard is the English language version of EN 60603-5:1998. It is identical with IEC 60603-5:1987. The UK participation in its preparation was entrusted by Technical Committee EPL/48, Elec
4、tromechanical components for electronic equipment, to Subcommittee EPL/48/2, Connectors for electronic equipment, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for c
5、hange, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 adde
6、d to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC standards n
7、ormally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the sect
8、ion entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application.
9、 Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 34 and a back cover. This standard has been updated (see copyright date) and may
10、 have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 06:57:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60603-5:1998 BSI 05-19
11、99i Contents Page National forewordInside front cover Foreword2 Text of EN 60603-53 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 06:57:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 06:57:11 GMT+00:00 2006, Uncontrolled Copy, (
12、c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60603-5 February 1998 ICS 31.220.10 Descriptors: Electronic components, electric connectors, printed-circuit cards, connector plugs, bed plates, designation, dimensions, assembling, couplings, tests, standard gauges, characteristics English
13、 version Connectors for frequencies below 3 MHz for use with printed boards Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing (IEC 60603-5:1987) Connecteurs pour frquences infrieures 3 MHz pour utilisation avec cartes imprimes Partie
14、 5: Connecteurs encartables et connecteurs enfichables pour cartes imprimes double face au pas de 2,54 mm (0,1 in) (CEI 60603-5:1987) Steckverbinder fr gedruckte Schaltungen fr Frequenzen unter 3 MHz Teil 5: Steckverbinder fr direktes Stecken und indirekte Steckverbinder fr beidseitig-beschichtete l
15、eiterplatten mit 2,54 mm (0,1 in) Kontaktabstand (IEC 60603-5:1987) This European Standard was approved by CENELEC on 1998-01-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national st
16、andard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any o
17、ther language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finlan
18、d, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Norm
19、ung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1998 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60603-5:1998 E Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 06:57:11 GMT+00:00 2006, Uncontrolled Copy, (c)
20、BSI EN 60603-5:1998 BSI 05-1999 2 Foreword The text of the International Standard IEC 60603-5:1987, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the formal vote and was approved by CENELEC as EN 60603-
21、5 on 1998-01-01 without any modification. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 60603-5:1987 was a
22、pproved by CENELEC as a European Standard without any modification. Contents Page Foreword2 1Scope3 2IEC type designation4 3Common features5 4Dimensions7 5Gauges and test fixtures18 6Characteristics25 7Test schedule26 Annex ZA (normative) Normative references to international publications with their
23、 corresponding European publications34 latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 1998-12-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 1998-12-01 Licen
24、sed Copy: sheffieldun sheffieldun, na, Sat Nov 11 06:57:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60603-5:1998 BSI 05-19993 This standard shall be used in conjunction with IEC Publication 512: Electromechanical Components for Electronic Equipment: Basic Testing procedures and Measuring Method
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-60603-5-1998 IEC-60603-5-1987 BS EN 60603 1998 IEC 1987
链接地址:https://www.31doc.com/p-3744372.html