BS-ISO-6022-2006.pdf
《BS-ISO-6022-2006.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-6022-2006.pdf(20页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 6022:2006 Hydraulic fluid power Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series ICS 23.100.20 ? Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 07:01:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 6022:2006 This British Standard was publishe
2、d under the authority of the Standards Policy and Strategy Committee on 15 February 2006 BSI 15 February 2006 ISBN 0 580 47586 7 National foreword This British Standard reproduces verbatim ISO 6022:2006 and implements it as the UK national standard. It supersedes BS ISO 6022:1981 which is withdrawn.
3、 The UK participation in its preparation was entrusted by Technical Committee MCE/18, Fluid power systems and components, to Subcommittee MCE/18/-/3, Cylinders, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cros
4、s-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Stan
5、dards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the
6、 responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front c
7、over, the ISO title page, pages ii to iv, pages 1 to 13 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 07:01:07 GMT+00:
8、00 2006, Uncontrolled Copy, (c) BSI Reference number ISO 6022:2006(E) INTERNATIONAL STANDARD ISO 6022 Second edition 2006-02-01 Hydraulic fluid power Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series Transmissions hydrauliques Dimensions dinterchangeabilit des vrins 25 MPa (250 b
9、ar) simple tige BS ISO 6022:2006 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 07:01:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 07:01:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iii Foreword ISO (the International Organization f
10、or Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has th
11、e right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Internat
12、ional Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication
13、 as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
14、 ISO 6022 was prepared by Technical Committee ISO/TC 131, Fluid power systems, Subcommittee SC 3, Cylinders. This second edition cancels and replaces the first edition (ISO 6022:1981 and ISO 8137:1986), which have been technically revised. BS ISO 6022:2006 Licensed Copy: sheffieldun sheffieldun, na,
15、 Sun Nov 26 07:01:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iv Introduction In hydraulic fluid power systems, power is transmitted and controlled through a liquid under pressure within an enclosed circuit. One component of such systems is the fluid power cylinder. This is a device that converts
16、power into linear mechanical force and motion. It consists of a movable element, i.e. a piston and piston rod, operating within a cylindrical bore. BS ISO 6022:2006 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 07:01:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 1 Hydraulic fluid power Moun
17、ting dimensions for single rod cylinders, 25 MPa (250 bar) series 1 Scope This International Standard establishes mounting dimensions for hydraulic cylinders for use at 25 MPa 250 bar1), as required for interchangeability of these cylinders. NOTE This International Standard allows manufacturers of h
18、ydraulic equipment flexibility in the design of 25 MPa (250 bar) cylinders and does not restrict technical development; however, it does provide basic guidelines. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, o
19、nly the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1179-12), Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 1: Threaded po
20、rts ISO 3320, Fluid power systems and components Cylinder bores and piston rod diameters Metric series ISO 4395, Fluid power systems and components Cylinders Piston rod thread dimensions and types ISO 55983), Fluid power systems and components Vocabulary ISO 6099, Fluid power systems and components
21、Cylinders Identification code for mounting dimensions and mounting types ISO 6149-14), Connections for fluid power and general use Ports and stud ends with ISO 261 threads and O-ring sealing Part 1: Ports with O-ring seal in truncated housing ISO 6162-1, Hydraulic fluid power Flange connectors with
22、split or one-piece flange clamps and metric or inch screws Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 ISO 6162-2, Hydraulic fluid power Flange connectors with split or one-piece flange clamps and metric or inch screws Part 2: Flange connec
23、tors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51 1) 1 bar = 0,1 MPa = 105 Pa; 1MPa = 1 N/mm2 2) To be published. (Revision of ISO 1179:1981) 3) To be published. (Revision of ISO 5598:1985) 4) To be published. (Revision of ISO 6149-1:1993) BS ISO 6022:2006 Licensed Co
24、py: sheffieldun sheffieldun, na, Sun Nov 26 07:01:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 2 ISO 6164, Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) ISO 81325), Hydraulic fluid power Single rod cylinders, 16
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 6022 2006
链接地址:https://www.31doc.com/p-3744374.html