BS-EN-60684-3-211-1994 IEC-60684-3-211-1992.pdf
《BS-EN-60684-3-211-1994 IEC-60684-3-211-1992.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60684-3-211-1994 IEC-60684-3-211-1992.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60684-3-211: 1994 IEC 684-3-211: 1992 Specification for Flexible insulating sleeving Part 3: Specification requirements for individual types of sleeving Sheet 211: Heat-shrinkable sleeving, general purpose, semi-rigid polyolefin, shrink ratio 2 : 1 The European Standard EN 606
2、84-3-211:1994 has the status of a British Standard UDC 621.315.616:621.315.671:536.416 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:38:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60684-3-211:1994 This British Standard, having been prepared under the direction of the Cables and I
3、nsulation Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 November 1994 BSI 11-1999 The following BSI references relate to the work on this standard: Committee reference CIL/15 Special announcement in BSI News July 1994 ISBN 0 580 2344
4、6 0 Cooperating organizations The European Committee for Electrotechnical Standardization (CENELEC), under whose supervision this European Standard was prepared, comprises the national committees of the following countries: AustriaItaly BelgiumLuxembourg DenmarkNetherlands FinlandNorway FrancePortug
5、al GermanySpain GreeceSweden IcelandSwitzerland IrelandUnited Kingdom Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:38:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60684-3-211:1994 BSI 11-1999i Contents Page Cooperating orga
6、nizationsInside front cover National forewordii Foreword2 Introduction3 1General3 2Designation3 3Requirements3 4Property requirements3 5General requirements3 Annex ZA (normative) Other international publications quoted in this standard with the references of the relevant European publications7 Natio
7、nal annex NA (informative) Committees responsibleInside back cover National annex NB (informative) Cross-referencesInside back cover Table 1 Dimensional requirements3 Table 2 Property requirements4 Table 3 Additional property requirements5 Table 4 Breakdown voltage6 Table 5 Resistance to selected fl
8、uids6 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:38:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60684-3-211:1994 ii BSI 11-1999 National foreword This British Standard has been prepared under the direction of the Cables and Insulation Standards Policy Committee and is the Engl
9、ish language version of EN 60684-3-211:1994 Specification for flexible insulating sleeving Part 3: Specification requirements for individual types of sleeving Sheet 211: Heat-shrinkable sleeving, general purpose, semi-rigid polyolefin, shrink ratio 2 : 1, published by the European Committee for Elec
10、trotechnical Standardization (CENELEC). It is identical with IEC 684-3-211:1992 published by the International Electrotechnical Commission (IEC). A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct ap
11、plication. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 8, an inside back cover and a back cover. This standard has been updat
12、ed (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:38:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 6
13、0684-3-211 May 1994 UDC 621.315.616:621.315.671:536.416 Descriptors: Electrical insulating materials, protector sleevings, polyolefin, semi-rigid English version Specification for flexible insulating sleeving Part 3: Specification requirements for individual types of sleeving Sheet 211: Heat-shrinka
14、ble sleeving, general purpose, semi-rigid polyolefin, shrink ratio 2 : 1 (IEC 684-3-211:1992) Spcification pour gaines isolantes souples Partie 3: Spcifications particulires aux types particuliers de gaines Feuille 211: Gaines thermortractables tous usages, en polyolfine, semi-rigides, rapport de rt
15、reint 2 : 1 (CEI 684-3-211:1992) Bestimmung fr flexible Isolierschluche Teil 3: Anforderungen fr einzelne Schlauchtypen Blat 211: Wrmeschrumpf-Schluche, Standardtyp, Polyolefin halbfest, schrumpfverhltnis 2 : 1 (IEC 684-3-211:1992) This European Standard was approved by CENELEC on 1993-12-08. CENELE
16、C members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on app
17、lication to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secreta
18、riat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC E
19、uropean Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1994 Copyright reserved to CENELEC members Ref. No. EN 60684-3-211:1994 E Licensed Copy: sh
20、effieldun sheffieldun, na, Thu Nov 09 15:38:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60684-3-211:1994 BSI 11-1999 2 Foreword The CENELEC questionnaire procedure, performed for finding out whether or not the International Standard IEC 684-3-211:1992 could be accepted without textual changes,
21、has shown that no common modifications were necessary for the acceptance as European Standard. The reference document was submitted to the CENELEC members for formal vote and was approved by CENELEC as EN 60684-3-211 on 8 December 1993. The following dates were fixed: For products which have complie
22、d with the relevant national standard before 1995-3-15, as shown by the manufacturer or by a certification body, this previous standard may continue to apply for production until 2000-03-14. Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative.
23、 latest date of publication of an identical national standard(dop) 1995-03-15 latest date of withdrawal of conflicting national standards(dow) 1995-03-15 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:38:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60684-3-211:1994 BSI 11-19993 Introd
24、uction This International Standard is one of a series which deals with flexible insulating sleeving for electrical purposes. This series consists of three parts: Part 1: Definitions and general requirements (IEC 684-1); Part 2: Methods of test (IEC 684-2); Part 3: Specification requirements for indi
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-60684-3-211-1994 IEC-60684-3-211-1992 BS EN 60684 211 1994 IEC 1992
链接地址:https://www.31doc.com/p-3744377.html