BS-EN-836-1997.pdf
《BS-EN-836-1997.pdf》由会员分享,可在线阅读,更多相关《BS-EN-836-1997.pdf(84页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 836:1997 Incorporating Amendments Nos. 1 and 2 Garden equipment Powered lawnmowers Safety The European Standard EN 836:1997, with the incorporation of amendments A1:1997, A2:2001 and A3:2004, has the status of a British Standard ICS 65.060.70 ? BS EN 836:1997 This British Stan
2、dard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 December 1997 BSI 2006 The following BSI references relate to the work on this standard: Committee reference AGE/20 Draft for comment 9
3、2/81133 DC ISBN 0 580 28688 6 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee AGE/20, Powered lawn and garden equipment, upon which the following bodies were represented: Agricultural Engineers Association British Agricul
4、tural and Garden Machinery Association Ltd. Consumers Association Department of Trade and Industry (Consumer Safety Unit, C A Division) Health and Safety Executive Institute of Leisure and Amenity Management Local Authority Organizations Silsoe Research Institute Amendments issued since publication
5、Amd. No.DateText affected 1322228 November 2001 1638431 July 2006Indicated by a sideline BS EN 836:1997 BSI 2006 i National foreword This British Standard has been prepared by Technical Committee AGE/20, and is the English language version of EN 836:1997 Garden equipment Powered lawnmowers Safety, i
6、ncluding amendments A1:1997, A2:2001 and A3:2004, published by the European Committee for Standardization (CEN). EN 836 was produced as a result of international discussions in which the United Kingdom took an active part. It supersedes BS 5107:1974 which is withdrawn. Cross-references The British S
7、tandards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.
8、This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside
9、front cover, pages i and ii, the EN title page, pages 2 to 79 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Sidelining in this document indicates the most recent changes by amendment. ii blank EUROPEAN STANDARD NORME EUROPENNE EURO
10、PISCHE NORM EN 836 March 1997 + A1+ A3 September 1997February 2004 + A2 March 2001 ICS 65.060.70 Descriptors: Horticultural machinery, power horticultural machinery, lawn mowers, safety requirements, accident prevention, specifications, design, equipment specifications, safety devices, hazards, test
11、s, verification, marking English version Garden equipment Powered lawnmowers Safety Matriel de jardinage Tondeuses gazon moteur Scurit Gartengerte Motorgetriebene Rasenmher Sicherheit This European Standard was approved by CEN on 1997-03-12. CEN members are bound to comply with the CEN/CENELEC Inter
12、nal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member
13、. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members a
14、re the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisatio
15、n Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1997 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 836:1997 E EN 836:1997 BSI 20062 Foreword This European Standard has been prepared by Te
16、chnical Committee CEN/TC 144, Tractors and machinery for agriculture and forestry, the Secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 1997, and co
17、nflicting national standards shall be withdrawn at the latest by September 1997. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU
18、Directive(s), see informative Annex ZA, which is an integral part of this standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, Fr
19、ance, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Foreword to amendment A1 This amendment EN 836:1997/A1:1997 to EN 836:1997 has been prepared by Technical Committee CEN/TC 144, Tractors and machinery for agr
20、iculture and forestry, the Secretariat of which is held by AFNOR. This amendment to the European Standard EN 836:1997 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 1998, and conflicting national standards shall
21、be withdrawn at the latest by April 1998. This amendment to European Standard EN 836:1997 has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). According to the CEN/CENELEC Internal R
22、egulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and t
23、he United Kingdom. Foreword to amendment A2 This amendment EN 836:1997/A2:2001 to the EN 836:1997 has been prepared by Technical Committee CEN/TC 144, Tractors and machinery for agriculture and forestry, the Secretariat of which is held by AFNOR. This amendment to the European Standard EN 836:1997 s
24、hall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2001, and conflicting national standards shall be withdrawn at the latest by September 2001. This amendment to the European Standard EN 836:1997 has been prepared
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 836 1997
链接地址:https://www.31doc.com/p-3744528.html