BS-EN-ISO-10363-1995.pdf
《BS-EN-ISO-10363-1995.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-10363-1995.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 10363:1995 Hot-melt adhesives Determination of thermal stability The European Standard EN ISO 10363:1995 has the status of a British Standard ICS 83.180 UDC 665.93:620.193.94 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:06:59 GMT+00:00 2006, Uncontrolled Copy,
2、 (c) BSI BS EN ISO 10363:1995 This British Standard, having been prepared under the direction of the Sector Board for Materials and Chemicals, was published under the authority of the Standards Board and comes into effect on 15 December 1995 BSI 12-1999 The following BSI references relate to the wor
3、k on this standard: Committee reference STI/52 Draft for comment 91/54357 DC ISBN 0 580 24494 6 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee STI/52, Adhesives, upon which the following bodies were represented: British
4、Adhesives and Sealants Association British Plastics Federation British Steel Industry Centre for Adhesive Technology Chemical Industries Association Contract Flooring Association Department of the Environment (Building Research Establishment) Department of Trade and Industry (National Physical Labor
5、atory) European Resin Manufacturers Association Federation of the Electronics Industry Institute of Materials Ministry of Defence Society of Motor Manufacturers and Traders Timber Research and Development Association University of Bristol Welding Institute Amendments issued since publication Amd. No
6、.DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:06:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 10363:1995 BSI 12-1999i Contents Page Committees responsibleInside front cover National forewordii Foreword2 1Scope3 2Normative references3 3Principle3 4Apparatus3 5Proc
7、edure3 6Expression of results4 7Precision4 8Test report4 Annex A (informative) Example of expression of results5 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:06:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 10363:1995 ii BSI 12-1999 National foreword This British Standard has
8、been prepared by Technical Committee STI/52 and is the English language version of EN ISO 10363:1995 Hot-melt adhesives Determination of thermal stability, published by the European Committee for Standardization (CEN). EN ISO 10363 was produced as a result of international discussion in which the Un
9、ited Kingdom participated. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pag
10、es This document comprises a front cover, an inside front cover, pages i and ii, the EN ISO title page, pages 2 to 5 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover
11、. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:06:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10363 June 1995 ICS 83.180 Descriptors: Plastics, adhesives, thermofusible materials, tests, determination, thermal stability English
12、version Hot-melt adhesives Determination of thermal stability (ISO 10363:1992) Adhsifs thermofusibles Dtermination de la stabilit thermique (ISO 10363:1992) Schmelzklebstoffe Bestimmung der thermischen Bestndigkeit (ISO 10363:1992) This European Standard was approved by CEN on 1995-05-11. CEN member
13、s are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application
14、 to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the sam
15、e status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardizati
16、on Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1995 Copyright reserved to CEN members Ref. No. EN ISO 10363:1995 E Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:06:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN
17、ISO 10363:1995 BSI 12-1999 2 Foreword The text of the International Standard from ISO/TC 61 “Plastics” of the International Organization for Standardization (ISO) has been taken over as a European Standard by the Technical Committee CEN/TC 193 “Adhesives”. This European Standard shall be given the s
18、tatus of a national standard, either by publication of an identical text or by endorsement, at the latest by December 1995 and conflicting national standards shall be withdrawn at the latest by December 1995. According to the CEN/CENELEC Internal Regulations, the following countries are bound to imp
19、lement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:06:59 GMT+00:00 2006, Uncontrol
20、led Copy, (c) BSI EN ISO 10363:1995 BSI 12-19993 1 Scope This International Standard specifies a method for determining the thermal stability of non-reactive hot-melt adhesives at temperatures up to 260 C. 2 Normative references The following standards contain provisions which, through reference in
21、this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most rec
22、ent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 1770:1981, Solid-stem general purpose thermometers. ISO 2555:1989, Plastics Resins in the liquid state or as emulsions or dispersions Determination of apparent vis
23、cosity by the Brookfield Test method. ISO 4625:1980, Binders for paints and varnishes Determination of softening point Ring-and-ball method. 3 Principle A quantity of hot-melt adhesive is heated under specified conditions. Samples are taken at regular time intervals and any changes in viscosity and
24、in softening point (determined by the “ring-and-ball” method) during heating are noted. The maximum temperature and the duration of the test are fixed by agreement between the adhesive user and manufacturer. 4 Apparatus 4.1 Stainless-steel or glass vessel, external diameter 65 mm, height 95 mm, equi
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 10363 1995
链接地址:https://www.31doc.com/p-3744574.html