《BS-EN-ISO-105-X01-1996.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-105-X01-1996.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 105-X01:1996 Textiles Tests for colour fastness Part X01: Colour fastness to carbonizing: Aluminium chloride The European Standard EN ISO 105-X01:1995 has the status of a British Standard ICS 59.080.10 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:22:19 GMT+00:
2、00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 105-X01:1996 This British Standard, having been prepared under the direction of the Sector Board for Materials and Chemicals, was published under the authority of the Standards Board and comes into effect on 15 March 1996 BSI 11-1999 The following BSI re
3、ferences relate to the work on this standard: Committee reference TCI/25 Draft announced in BSI News February 1995 ISBN 0 580 23983 7 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee TCI/25, Chemical properties, upon which
4、 the following bodies were represented: Association of Consulting Scientists Association of Suppliers to the British Clothing Industry British Apparel and Textile Confederation British Clothing Industry Association British Measurement and Testing Association British Retail Consortium Chemical Indust
5、ries Association Consumer Policy Committee of BSI Fabric Care Research Association Ltd. Home Laundering Consultative Council International Wool Secretariat Mail Order Traders Association Ministry of Defence National Wool Textile Export Corporation SATRA Footwear Technology Centre Soap and Detergent
6、Industry Association Society of Dyers and Colourists Textile Finishers Association Participation in the detailed technical work was undertaken by the Society of Dyers and Colourists. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:22
7、:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 105-X01:1996 BSI 11-1999i Contents Page Committees responsibleInside front cover National forewordii Foreword2 1Scope3 2Normative references3 3Principle3 4Apparatus and materials3 5Test specimen3 6Procedure3 7Test report4 Annex ZA (normative)
8、Normative references to international publications with their relevant European publications5 List of referencesInside back cover Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:22:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 105-X01:1996 ii BSI 11-1999 National foreword This Br
9、itish Standard has been prepared by Technical Committee TCI/25 and is the English language version of EN ISO 105-X01:1995 Textiles Tests for colour fastness Part X01: Colour fastness to carbonizing: Aluminium chloride, published by the European Committee for Standardization (CEN). It was derived by
10、CEN from ISO 105-X01:1993 published by the International Organization for Standardization (ISO). This British Standard supersedes the corresponding method in BS 1006:1990, which is withdrawn by amendment. In Annex ZA, the reference to ISO 105-A03 is an error and should be ignored. A British Standard
11、 does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references Publication referred toCorresponding Briti
12、sh Standard ISO 105-A01:1989BS EN ISO 105 Textiles Tests for colour fastness Part A01:1996 General principles of testing ISO 105-A02:1993BS EN 20105 Textiles Tests for colour fastness Part A02:1995 Grey scale for assessing change in colour Summary of pages This document comprises a front cover, an i
13、nside front cover, pages i and ii, the EN ISO title page, pages 2 to 6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffie
14、ldun sheffieldun, na, Sun Nov 19 13:22:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 105-X01 November 1995 ICS 59.080.10 Descriptors: Textiles, dyes, tests, carbonizing tests, determination, colour fastness English version Textiles Tests for c
15、olour fastness Part X01: Colour fastness to carbonizing: Aluminium chloride (ISO 105-X01:1993) Textiles Essais de solidit des teintures Partie X01: Solidit au carbonisage: Chlorure daluminium (ISO 105-X01:1993) Textilien Farbechtheitsprfungen Teil X01: Farbechtheit gegen das Karbonisiern: Aluminiumc
16、hlorid (ISO 105-X01:1993) This European Standard was approved by CEN on 1995-07-28. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists an
17、d bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibi
18、lity of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Por
19、tugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1995 All rights of reproduction and communication in any form and by any means reser
20、ved in all countries to CEN and its members. Ref. No. EN ISO 105-X01:1995 E Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:22:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 105-X01:1995 BSI 11-1999 2 Foreword The text of the International Standard from ISO/TC 38, Textiles, of the In
21、ternational Organization for Standardization (ISO) has been taken over as a European Standard by the Technical Committee CEN/TC 248, Textiles and textile products. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, a
22、t the latest by May 1996, and conflicting national standards shall be withdrawn at the latest by May 1996. According to CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Irela
23、nd, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. NOTENormative references to International Standards are listed in Annex ZA (normative). Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:22:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
24、EN ISO 105-X01:1995 BSI 11-19993 1 Scope This part of ISO 105 specifies a method for determining the resistance of the colour of textiles in all forms to the manufacturing operation designed to remove vegetable impurities by a treatment with aluminium chloride at high temperatures. The method is mai
25、nly applicable to wool and textiles containing wool, particularly those containing also acetate or polyamide fibres. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 105. At the time of publication, the
26、 editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO 105 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently v
27、alid International Standards. ISO 105-A01:1989, Textiles Tests for colour fastness Part A01: General principles of testing. ISO 105-A02:1993, Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour. 3 Principle A specimen impregnated with aluminium chloride solution is
28、 dried, baked, rinsed and neutralized. The changes in colour after rinsing, neutralizing and drying are assessed with the grey scale. 4 Apparatus and materials 4.1 Oven, for drying specimens in air 60 C 2 C and baking in air at 115 C 2 C. 4.2 Aluminium chloride solution ( 1,037 g/ml), containing 51,
29、4 g of AlCl3.6H2O per litre. 4.3 Ammonium hydroxide solution, containing 2 ml of 20 % NH4OH per litre. 4.4 Test control: A dyeing of Cl Mordant Red 3 (Colour Index, 3rd Edition) treated with potassium dichromate. The test control is prepared by entering a well wetted-out pattern of wool cloth at 40
30、C into a dye-bath containing 1 % Cl Mordant Red 3 (Colour Index, 3rd Edition), 10 % sodium sulfate decahydrate (Na2SO4.10H2O) and 3 % acetic acid (300 g/l), all percentages being calculated on the mass of the pattern, at a liquor ratio of 40 : 1. The dye-bath is raised to the boil in 30 min and boil
31、ed for a further 30 min. If necessary, the dye-bath is exhausted by careful addition of 1 % to 3 % acetic acid (300 g/l) or 1 % sulfuric acid ( 1,84 g/ml), well diluted with water. The bath is boiled for a further 15 min after addition of the acid. The dye-bath is cooled down by addition of cold wat
32、er, and 0,5 % potassium dichromate dissolved in water is added. The dye-bath is raised to the boil again and boiled for 30 min. The pattern is then removed, rinsed in cold, running tap-water and dried. 4.5 Grey scale for assessing change in colour, complying with ISO 105-A02. 5 Test specimen 5.1 If
33、the textile to be tested is fabric, use a specimen measuring 40 mm 100 mm. 5.2 If the textile to be tested is yarn, knit it into fabric and use a specimen measuring 40 mm 100 mm, or make a wick of parallel lengths 100 mm long and about 5 mm in diameter, tied near both ends. 5.3 If the textile to be
34、tested is loose fibre, comb and compress enough of it to form a sheet measuring 40 mm 100 mm. 6 Procedure 6.1 Carry out the operations described below in 6.2 to 6.5 with the test specimen and the test-control specimen in parallel, in separate baths. 6.2 Immerse the specimen in the aluminium chloride
35、 solution (4.2) for 15 min at room temperature (at a liquor ratio of 20 : 1). Squeeze it to leave in 80 % of its own mass of solution. 6.3 Dry the specimen by hanging it in an oven for 30 min, or longer if necessary, at 60 C 2 C. Then bake it by heating for 15 min at 115 C 2 C. 6.4 Rinse the specime
36、n for 5 min in cold, running tap-water and then divide it into two equal parts. Dry one half by hanging it in air at a temperature not exceeding 60 C. 6.5 Agitate the other half for 30 min at room temperature in the ammonium hydroxide solution (4.3) (liquor ratio 40 : 1). Then rinse it for 5 min in
37、cold, running tap-water and dry it by hanging it in air at a temperature not exceeding 60 C. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:22:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 105-X01:1995 4 BSI 11-1999 6.6 Assess the effect on the unneutralized test-control specimen w
38、ith the grey scale. If the change in colour is not equal to the rating “4-5 yellower” on the appropriate scale, the test has not been carried out correctly, and the operations described in 6.1 to 6.5 inclusive shall be repeated with a fresh test specimen and a fresh test-control specimen. 6.7 Assess
39、 the change in colour of each half of the test specimen with the grey scale. 7 Test report The test report shall include the following particulars: a) the number and date of publication of this part of ISO 105 (i.e. ISO 105-X01:1993); b) all details necessary for the identification of the sample tes
40、ted; c) the numerical ratings for change in colour for both the rinsed and the neutralized portions of the test specimen. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:22:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 105-X01:1995 BSI 11-19995 Annex ZA (normative) Normative referen
41、ces to international publications with their relevant European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For
42、 dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. PublicationYearTitleENYear ISO 105-A011994Tex
43、tiles Tests for colour fastness Part A01: General principles of testing EN ISO 105-A011994 ISO 105-A031993Textiles Tests for colour fastness Part A03: Grey scale for assessing staining EN 20105-A031994 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:22:19 GMT+00:00 2006, Uncontrolled Copy,
44、 (c) BSI 6 blank Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:22:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 105-X01:1996 BSI 11-1999 List of references See national foreword. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:22:19 GMT+00:00 2006, Uncontrolled Copy,
45、(c) BSI BS EN ISO 105-X01:1996 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Chart
46、er. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccura
47、cy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that
48、subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI pol
49、icy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing
链接地址:https://www.31doc.com/p-3744594.html