BS-EN-60684-3-212-1998 IEC-60684-3-212-1998.pdf
《BS-EN-60684-3-212-1998 IEC-60684-3-212-1998.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60684-3-212-1998 IEC-60684-3-212-1998.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60684-3-212: 1998 IEC 60684-3-212: 1998 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 212: Heat-shrinkable polyolefin sleeving, flame retarded, shrink ratio 2 : 1 The European Standard EN 60684-3-212:1998 has the status of a British
2、 Standard ICS 29.035.20 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:40:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60684-3-212:1998 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Sta
3、ndards Board and comes into effect on 15 October 1998 BSI 04-1999 ISBN 0 580 30399 3 National foreword This British Standard is the English language version of EN 60684-3-212:1998. It is identical with IEC 60684-3-212:1998. The UK participation in its preparation was entrusted by Technical Committee
4、 GEL/15, Insulating materials, to Subcommittee GEL/15/3, Material specifications, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests
5、 informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instanc
6、e, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which l
7、ists normative references to international publications with their corresponding European publications. The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Stan
8、dards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Stand
9、ard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 8, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had a
10、mendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:40:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60684-3-212:1998 BSI 04-1999i Con
11、tents Page National forewordInside front cover Foreword2 Text of EN 60684-3-2123 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:40:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:40:31 GMT+00:00 2006, Uncontrolled Copy, (c)
12、BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60684-3-212 August 1998 ICS 29.035.01 Descriptors: Solid electrical insulating materials, protection sleevings, heat-shrinkable materials, polyolefins, flexible conductors, designation, individual specifications, dimensions, mass, characterist
13、ics, tables of data, breakdown voltage English version Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 212: Heat-shrinkable polyolefin sleeving, flame retarded, shrink ratio 2 : 1 (IEC 60684-3-212:1998) Gaines isolantes souples Partie 3: Spcifications pour
14、types particuliers de gaines Feuille 212: Gaines thermortractables en polyolfine, retardes la flamme, rapport de rtreint 2 : 1 (CEI 60684-3-212:1998) Isolierschluche Teil 3: Anforderungen fr einzelne Schlauchtypen Blatt 212: Wrmeschrumpfende Polyolefinschluche, flammwidrig, Schrumpfverhltnis 2 : 1 (
15、IEC 60684-3-212:1998) This European Standard was approved by CENELEC on 1998-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date list
16、s and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the re
17、sponsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland,
18、Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B
19、-1050 Brussels 1998 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60684-3-212:1998 E Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:40:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60684-3-212:1998 BSI 04-1999 2 Fore
20、word The text of document 15C/875/FDIS, future edition 1 of IEC 60684-3-212, prepared by SC 15C, Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60684-3-212 on 1998-08-01. The following dates were fixed: Annexes des
21、ignated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 60684-3-212:1998 was approved by CENELEC as a European Standard without any modification. Contents Page
22、 Foreword2 Introduction3 1Scope3 2Normative references3 3Designation4 4Conditions of test4 5Requirements4 6Sleeving conformance4 Annex ZA (normative) Normative references to international publications with their corresponding European publicationsInside back cover Table 1 Dimensional and mass requir
23、ements5 Table 2 Property requirements5 Table 3 Requirements for breakdown voltage7 Table 4 Resistance to selected fluids7 Table 5 Additional property requirements8 latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement(d
24、op) 1999-05-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 2001-05-01 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:40:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60684-3-212:1998 BSI 04-19993 Introduction This International Standard
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-60684-3-212-1998 IEC-60684-3-212-1998 BS EN 60684 212 1998 IEC
链接地址:https://www.31doc.com/p-3744612.html