BS-EN-ISO-11997-1-2006.pdf
《BS-EN-ISO-11997-1-2006.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-11997-1-2006.pdf(24页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 11997-1:2006 Incorporating amendment no. 1 (renumbers BS ISO 11997-1:2005 as BS EN ISO 11997-1:2006) Paints and varnishes Determination of resistance to cyclic corrosion conditions Part 1: Wet (salt fog)/dry/humidity This European Standard EN ISO 11997-1:2006 has the statu
2、s of a British Standard ICS 87.040 ? Licensed Copy: London South Bank University, London South Bank University, Fri Mar 02 00:51:34 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN ISO 11997-1:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee
3、 on 18 April 2005 BSI 2007 ISBN 0 580 45824 5 National foreword This British Standard was published by BSI. It is the UK implementation of EN ISO 11997-1:2006. It is identical to ISO 11997-1:2005. It supersedes BS 3900-F18:1998 which is withdrawn. The UK participation in its preparation was entruste
4、d to Technical Committee STI/10, Test methods for paints. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Com
5、pliance with a British Standard cannot of itself confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments 1687528 February 2007 Renumbers BS ISO 11997-1:2005 as BS EN ISO 11997-1:2006 Licensed Copy: London South Bank University, London South Bank University,
6、Fri Mar 02 00:51:34 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11997-1 February 2006 ICS 87.040 English Version Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humidity (ISO 11997-
7、1:2005) Peintures et vernis - Dtermination de la rsistance aux conditions de corrosion cyclique - Partie 1: Brouillard salin/scheresse/humidit (ISO 11997-1:2005) Beschichtungsstoffe - Bestimmung der Bestndigkeit bei zyklischen Korrosionsbedingungen - Teil 1: Nass (Salzsprhnebel)/trocken/Feuchte (ISO
8、 11997-1:2005) This European Standard was approved by CEN on 16 January 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibl
9、iographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility o
10、f a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
11、Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050
12、Brussels 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11997-1:2006: E Licensed Copy: London South Bank University, London South Bank University, Fri Mar 02 00:51:34 GMT+00:00 2007, Uncontrolled Copy, (c) BSI Foreword Acc
13、ording to the CEN/CENELEC Internal Regulations, the national standards organizations of the following Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Switzerland and United Kingdom. Endorsement notice The text of ISO 11997-1:2005 has been appr
14、oved by CEN as EN ISO 11997-1:2006 without any modifications. The text of ISO 11997-1:2005 has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 11997-1:2006 by Technical Committee CEN/T
15、C 139 “Paints and varnishes“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2006, and conflicting national standards shall be withdrawn at the lat
16、est by August 2006. Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, EN ISO 11997-1:2006 Licensed Copy: London South Bank University, London South B
17、ank University, Fri Mar 02 00:51:34 GMT+00:00 2007, Uncontrolled Copy, (c) BSI Reference number ISO 11997-1:2005(E) OSI 5002 INTERNATIONAL STANDARD ISO 11997-1 Second edition 2005-03-15 Paints and varnishes Determination of resistance to cyclic corrosion conditions Part 1: Wet (salt fog)/dry/humidit
18、y Peintures et vernis Dtermination de la rsistance aux conditions de corrosion cyclique Partie 1: Brouillard salin/scheresse/humidit EN ISO 11997-1:2006 Licensed Copy: London South Bank University, London South Bank University, Fri Mar 02 00:51:34 GMT+00:00 2007, Uncontrolled Copy, (c) BSI ii Licens
19、ed Copy: London South Bank University, London South Bank University, Fri Mar 02 00:51:34 GMT+00:00 2007, Uncontrolled Copy, (c) BSI I SO 5002 All irthgs ersedevr iii Contents Page Forewordiv Introduction v 1 Scope1 2 Normative references .1 3 Principle.2 4 Required supplementary information.2 5 Salt
20、 fog test solution.2 6 Apparatus.3 7 Sampling4 8 Test panels 4 9 Method of exposure of test panels5 10 Operating conditions5 11 Procedure.5 12 Examination of test panels.6 13 Precision6 14 Test report6 Annex A (normative) Required supplementary information8 Annex B (informative) Factors to be consid
21、ered in the design and construction of salt spray cabinets9 Annex C (normative) Cycle A10 Annex D (normative) Cycle B11 Annex E (normative) Cycle C 12 Annex F (normative) Cycle D.13 EN ISO 11997-1:2006 Licensed Copy: London South Bank University, London South Bank University, Fri Mar 02 00:51:34 GMT
22、+00:00 2007, Uncontrolled Copy, (c) BSI iv I SO 5002 All irthgs ersedevr Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO tec
23、hnical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closel
24、y with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 11997 2006
链接地址:https://www.31doc.com/p-3744664.html