《BS-EN-ISO-13680-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-13680-2002.pdf(46页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 13680:2002 Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions The European Standard EN ISO 13680:2001 has the status of a British Standard ICS 75.180.10; 77.140.75 NO COPY
2、ING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:39:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 13680:2002 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strateg
3、y Committee, was published under the authority of the Standards Policy and Strategy Committee on 06 February 2002 BSI 06 February 2002 ISBN 0 580 38949 9 National foreword This British Standard is the official English language version of EN ISO 13680:2001. It is identical with ISO 13680:2000 The UK
4、participation in its preparation was entrusted by Technical Committee PSE/17, Materials and equipment for petroleum and natural gas industries, to Subcommittee PSE/17/-/5, Casing, tubing and drill pipe which has the responsibility to: A list of organizations represented on this subcommittee can be o
5、btained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find
6、” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal
7、obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summ
8、ary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to v, a blank page, pages 1 to 34, the Annex ZA page, and a back cover. The BSI copyright date displayed in this document indicates when the docume
9、nt was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:39:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 13680 November 2001 ICS 75.180.10; 77.140.75 English versi
10、on Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000) Industries du ptrole et du gaz naturel - Tubes sans soudure en acier alli rsistant la corrosion utiliss comme tubes de cuve
11、lage, tubes de production et tubes- bauches pour manchons - Conditions techniques de livraison (ISO 13680:2000) Erdl- und Erdgasindustrie - Nahtlose Rohre aus korrosionsbestndigen Legierungen zur Verwendung als Futter- oder Steigrohre sowie Muffenvorrohre - Technische Lieferbedingungen (ISO 13680:20
12、00) This European Standard was approved by CEN on 9 June 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical ref
13、erences concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member in
14、to its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sp
15、ain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national
16、 Members. Ref. No. EN ISO 13680:2001 E Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:39:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Foreword The text of the International Standard from Technical Committee ISO/TC 67 “Materials, equipment and offshore structures for petroleum and natural
17、 gas industries“ of the International Organization for Standardization (ISO) has been taken over as an European Standard by Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum and natural gas industries“, the secretariat of which is held by AFNOR. This European
18、Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2002, and conflicting national standards shall be withdrawn at the latest by May 2002. According to the CEN/CENELEC Internal Regulations, the national standar
19、ds organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement n
20、otice The text of the International Standard ISO 13680:2000 has been approved by CEN as a European Standard without any modification. NOTE: Normative references to International Standards are listed in annex ZA (normative). EN ISO 13680:2001 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:
21、39:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Reference number ISO 13680:2000(E) INTERNATIONAL STANDARD ISO 13680 First edition 2000-07-01 Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions Indus
22、tries du ptrole et du gaz naturel Tubes sans soudure en acier alli rsistant la corrosion utiliss comme tubes de cuvelage, tubes de production et tubes-bauches pour manchons Conditions techniques de livraison EN ISO 13680:2001 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:39:31 GMT+00:00
23、2006, Uncontrolled Copy, (c) BSI ISO 86310:(0002)E DPF dcsilremia ihTs PDF file may ctnoain emeddebd tyfepaces. In accnadroce with Aebods licensing lopicy, this file may be pirnted or ivewed ubt slahl ton be ideted lnuess the tyfepaces which are emeddebd rae licensed to nad intslaled on the computer
24、 freporming the ideting. In odwlnidaong this feli, trapies accept tierehn the sersnoptilibiy of ont infrnignig Aebods licsnenig lopicy. hTe ISO tneCarl Secterairat accepts no llibaiity in this .aera Abode is a tdaremark of Abode Stsyems Inctaropro.de teDails of the sfotwrae pudorcts used to crtaee t
25、ihs PDF file can be fnuod in the Garenel Info lerative to the file; the P-FDceration rapamteers were tpoimized for pirtning. Evrey crae ahs eebn taken to ensrue that the file is suitlbae for use by ISO memebr idobse. In the lnuikley etnev taht a plborem lerating to it is fdnuo, lpaese ifnorm the tne
26、Carl Secterairat at the serddas given lebow. ii EN ISO 13680:2001 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:39:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 08631:(0002)E iii ContentsPage 1Scope 1 2Normative references1 3Terms and definitions, symbols and abbreviated terms.3 3.1T
27、erms and definitions .3 3.2Symbols5 3.3Abbreviated terms .5 4Classification6 5Information to be supplied by the purchaser .6 6Material design qualification 7 7Manufacturing process .7 7.1Manufacturing of corrosion-resistant alloys 7 7.2Tube manufacturing process .7 8Requirements.8 8.1General8 8.2Che
28、mical composition 8 8.3Mechanical properties.9 8.4Corrosion properties.11 8.5Microstructure properties.11 8.6Visual inspection .11 8.7Non-destructive examination .12 8.8Hydrostatic test12 9Dimensions, masses and tolerances.13 9.1Outside diameter, wall thickness and mass.13 9.2Length.15 9.3Tolerances
29、16 10Inspection and testing.18 10.1Types of inspection document.18 10.2Type and frequency of tests.19 10.3Purchaser inspection 20 10.4Testing of chemical composition.20 10.5Testing of mechanical and other characteristics.20 10.6Inspection of dimensions .23 10.7Visual inspection .23 10.8Non-destructi
30、ve examination (NDE) 23 10.9Invalidation of the tests.23 10.10Retests23 10.11Sorting or reprocessing23 11Test methods23 11.1Chemical analysis23 11.2Tensile test.23 11.3Hardness test.24 11.4Impact test25 11.5Corrosion test 25 11.6Microstructure examination25 11.7Visual inspection .26 11.8Non-destruct
31、ive examination .26 11.9Dimensional testing.27 EN ISO 13680:2001 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:39:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 08631:(0002)E iv 11.10Hydrostatic test29 12Marking .29 12.1General29 12.2Marking on tubes for casing, tubing and coupling st
32、ock29 12.3Colour code identification.30 13Surface treatment 32 13.1General32 13.2Group 1 .32 13.3Groups 2, 3 and 4.32 14Surface protection.32 15Handling, packing and storage.33 15.1General33 15.2Handling33 15.3Packing .33 15.4Storage33 15.5Complaints after delivery33 Bibliography34 EN ISO 13680:2001
33、 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:39:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 08631:(0002)E v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing Internat
34、ional Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with I
35、SO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standard
36、s adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be
37、 the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 13680 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore structures for petroleum and natural gas industries, Subcommittee SC 5, Ca
38、sing, tubing and drill pipe. EN ISO 13680:2001 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:39:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 13680:2001 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:39:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI INTENRATIONAL TSANDAD
39、RISO 08631:(0002)E ISO 0002 All rights rsedevre1 Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions 1Scope This International Standard specifies the technical delivery conditions for corrosion-resis
40、tant alloy seamless tubes for casing, tubing and coupling stock. This International Standard is applicable to the following four groups of tube product: ? Group 1, comprised of stainless alloy with a martensitic or martensitic/ferritic structure; ? Group 2, comprised of stainless alloy with a ferrit
41、ic-austenitic structure, such as duplex and super duplex stainless alloy; ? Group 3, comprised of stainless alloy with an austenitic structure (iron base); ? Group 4, comprised of nickel-based alloys with an austenitic structure (nickel base). This International Standard contains no provisions relat
42、ing to the connection or other methods by which individual lengths of tube are joined to form a string. NOTEThe connection or joining method can influence the corrosion performance of the materials specified in this International Standard. 2Normative references The following normative documents cont
43、ain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to i
44、nvestigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 148, Steel C
45、harpy impact test (V-notch). ISO 377, Steel and steel products Location and preparation of samples and test pieces for mechanical testing. ISO 404, Steel and steel products General technical delivery requirements. ISO 643, Steels Micrographic determination of the ferritic or austenitic grain size. I
46、SO 783, Metallic materials Tensile testing at elevated temperature. ISO 3545-1, Steel tubes and fittings Symbols for use in specifications Part 1: Tubes and tubular accessories with circular cross-section. EN ISO 13680:2001 1 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:39:31 GMT+00:00
47、2006, Uncontrolled Copy, (c) BSI ISO 08631:(0002)E 2 ISO 0002 All rights rsedevre ISO 4885, Ferrous products Heat treatments Vocabulary. ISO 4948-1, Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition. ISO 4948-2, Steels Classification
48、 Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics. ISO 6508-1, Metallic materials Rockwell hardness test Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T). ISO 6892, Metallic materials Tensile testing a
49、t ambient temperature. ISO 6929, Steel products Definitions and classification. ISO 7539-1, Corrosion of metals and alloys Stress corrosion testing Part 1: General guidance on testing procedures. ISO 7539-2, Corrosion of metals and alloys Stress corrosion testing Part 2: Preparation and use of bent- beam specimens. ISO 7539-3, Corrosion of metals and alloys Stress corrosion testing Part 3: Preparation and use of U-bend specimens. ISO 7539-4, Corrosion of metals and alloys Stress corrosion tes
链接地址:https://www.31doc.com/p-3744692.html