BS-EN-61010-2-020-2006.pdf
《BS-EN-61010-2-020-2006.pdf》由会员分享,可在线阅读,更多相关《BS-EN-61010-2-020-2006.pdf(34页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61010-2-020: 2006 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-020: Particular requirements for laboratory centrifuges The European Standard EN 61010-2-020:2006 has the status of a British Standard ICS 19.080; 71.040.10 ? Lic
2、ensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 08:06:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61010-2-020:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 September 2006 BSI 2006 ISBN 0 580 49287 7 National foreword Thi
3、s British Standard was published by BSI. It is the UK implementation of EN 61010-2-020:2006. It is identical with IEC 61010-2-020:2006. It supersedes BS EN 61010-2.020:1995 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee EPL/66, Safety of measuring, c
4、ontrol and laboratory equipment. A list of organizations represented on EPL/66 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard c
5、annot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 08:06:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD EN 61010-2-020 NORME EUROPENNE EUROPISCHE NORM August 2006 CENELEC Euro
6、pean Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide fo
7、r CENELEC members. Ref. No. EN 61010-2-020:2006 E ICS 19.080; 71.040.10 Supersedes EN 61010-2-020:1994 + A1:1996 English version Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020:2
8、006) Rgles de scurit pour appareils lectriques de mesurage, de rgulation et de laboratoire Partie 2-020: Exigences particulires pour centrifugeuses de laboratoire (CEI 61010-2-020:2006) Sicherheitsbestimmungen fr elektrische Mess-, Steuer-, Regel- und Laborgerte Teil 2-020: Besondere Anforderungen a
9、n Laborzentrifugen (IEC 61010-2-020:2006) This European Standard was approved by CENELEC on 2006-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterat
10、ion. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tran
11、slation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Fr
12、ance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 08:06:13 GMT+00:00 2006, Un
13、controlled Copy, (c) BSI Foreword The text of document 66/367/FDIS, future edition 2 of IEC 61010-2-020, prepared by IEC TC 66, Safety of measuring, control, and laboratory equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61010-2-020 on 2006-07-01. This Eur
14、opean Standard supersedes EN 61010-2-020:1994 + A1:1996. It has been updated to provide more specific wording for some of the instructions or subclauses, and the language has been updated to reflect current terminology used in the industry today. This Part 2-020 is to be used in conjunction with EN
15、61010-1:2001, Safety requirements for electrical equipment for measurement, control and laboratory use Part 1: General requirements. Consideration may be given to future editions of, or amendments to, EN 61010-1. This Part 2-020 supplements or modifies the corresponding clauses of EN 61010-1:2001 so
16、 as to convert it into the European Standard “Safety requirements for laboratory centrifuges“. Where a particular clause or subclause of Part 1 is not mentioned in this Part 2-020, that clause or subclause applies as far as is reasonable. Where this part states “addition“, “modification“ or “replace
17、ment“, the relevant text of Part 1 is to be adapted accordingly. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2007-04-01 latest date by which the national standards conflic
18、ting with the EN have to be withdrawn (dow) 2009-07-01 In this standard: 1) the following print types are used: requirements: in roman type; NOTES: in small roman type; conformity and tests: italic type; terms used throughout this standard which have been defined in Clause 3: SMALL ROMAN CAPITALS; 2
19、) subclauses, figures, tables and notes which are additional to those in Part 1 are numbered starting from 101; additional annexes are lettered AA, BB, etc. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61010-2-020:2006 was approved by CENELEC as
20、 a European Standard without any modification. _ EN 61010-2-020:2006 2 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 08:06:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 3 EN 61010-2-020:2006 CONTENTS 1 Scope and object4 2 Normative references .5 3 Terms and definitions .5 4 Tests7 5 Marking
21、 and documentation 7 6 Protection against electric shock.10 7 Protection against mechanical HAZARDS10 8 Mechanical resistance to shock and impact.17 9 Protection against the spread of fire17 10 Equipment temperature limits and resistance to heat17 11 Protection against HAZARDS from fluids17 12 Prote
22、ction against radiation, including laser sources, and against sonic and ultrasonic pressure.18 13 Protection against liberated gases, explosion and implosion18 14 Components.19 15 Protection by interlocks 19 16 Test and measurement equipment 19 Annexes .20 Annex H Index of defined terms .20 Annex AA
23、 (normative) Dynamic microbiological test method for BIOSEALS21 Annex BB (informative) General guidance and rationale for particular subclauses .25 Annex ZA (normative) Normative references to international publications with their corresponding European publications30 Bibliography .29 Licensed Copy:
24、 sheffieldun sheffieldun, na, Thu Nov 09 08:06:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 61010-2-020:2006 4 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE Part 2-020: Particular requirements for laboratory centrifuges 1 Scope and object This clause o
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 61010 020 2006
链接地址:https://www.31doc.com/p-3744696.html