BS-EN-61196-2-1997 IEC-61196-2-1993.pdf
《BS-EN-61196-2-1997 IEC-61196-2-1993.pdf》由会员分享,可在线阅读,更多相关《BS-EN-61196-2-1997 IEC-61196-2-1993.pdf(26页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61196-2:1997 IEC 1196-2: 1993 Radio-frequency cables Specifications Part 2: Semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation Sectional specification The European Standard EN 61196-2:1995 has the status of a British Standard ICS 33.12
2、0.10 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 09:51:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61196-2:1997 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Standards Board and comes
3、into effect on 15 September 1997 BSI 09-1999 ISBN 0 580 27480 2 National foreword This British Standard is the English language version of EN 61196-2:1995. It is identical with IEC 1196-2:1993. The UK participation in its preparation was entrusted by Technical Committee EPL/46, Cables, wires and wav
4、eguides, R.F. connectors, and accessories for communication and signalling, to Subcommittee EPL/46/1, Communication cables, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or propo
5、sals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that Annex
6、 ZA lists normative references to international publications with their corresponding European publications. The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International
7、 Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British
8、Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 20 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorp
9、orated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 09:51:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61196-2:1997 BSI 09-1999i Contents Page National
10、forewordInside front cover Foreword2 Text of EN 61196-23 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 09:51:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 09:51:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NO
11、RME EUROPENNE EUROPISCHE NORM EN 61196-2 March 1995 ICS 33.120.10 Descriptors: Semi-rigid coaxial cables, PTFE insualtion English version Radio-frequency cables Specifications Part 2: Semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation Sectional specification
12、 (IEC 1196-2:1993) Cbles pour frquences radiolectriques Spcifications Partie 2: Cbles coaxiaux et semi-rigides pour frquences radiolectriques isolation polyttrafluorothylne Spcification intermdiaire (CEI 1196-2:1993) Spezifikationen fr Hochfrequenzkabel Teil 2: Halb-starre Hochfrequenz- und Koaxialk
13、abel mit Polytetrafluorethylen- (PTFE) Isolation Rahmenspezifikation (IEC 1196-2:1993) This European Standard was approved by CENELEC on 1995-03-06. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the stat
14、us of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German).
15、 A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Fin
16、land, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische N
17、ormung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1995 Copyright reserved to CENELEC members Ref. No. EN 61196-2:1995 E Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 09:51:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 61196-2:1995 BSI 09-1999 2 Foreword The text of the Inte
18、rnational Standard IEC 1196-2:1993, prepared by SC 46A, Coaxial cables, of IEC TC 46, Cables, wires, waveguides, R.F. connectors, and accessories for communication and signalling, was submitted to the formal vote and was approved by CENELEC as EN 61196-2 on 1995-03-06 without any modification. The f
19、ollowing dates were fixed: Annexes designated “normative” are part of the body of the standard. Annexes designated “informative” are given for information only. In this standard, Annex ZA is normative and Annex A is informative. Annex ZA has been added by CENELEC. Endorsement notice The text of the
20、International Standard IEC 1196-2:1993 was approved by CENELEC as a European Standard without any modification. Contents Page Foreword2 Section 1. General 1.1Scope and object3 1.2Normative references3 1.3Definitions3 1.4Information to be given in a detail specification3 1.4.1Outline drawing and dime
21、nsions3 1.4.2Materials3 1.4.3Ratings and characteristics3 1.4.4Marking of package3 Section 2. Ratings and characteristics 2.1Climatic category3 2.2Recommended ratings4 Page 2.2.1 Characteristic impedance4 2.2.2Tolerance on characteristic impedance4 2.2.3Rated temperature4 Section 3. Additional requi
22、rements 3.1Design and construction of outer conductor4 3.2Tests and measurements4 3.2.1Dimensions4 3.2.2Electrical tests4 3.2.3Mechanical and climatic tests5 Section 4. Quality assessment procedures 4.1Primary stage of manufacture7 4.2Structurally similar cables7 4.3Qualification approval7 Annex A (
23、informative) Examples of detail specifications8 Annex ZA (normative) Other international publications quoted in this Standard with references of the relevant European publications20 Figure 1 Block diagram of structural return loss test measuring equipment5 Figure A.1 Curves of maximum attenuation an
24、d power10 Figure A.2 Minimum structural return loss11 Figure A.3 Curves of maximum attenuation and power14 Figure A.4 Minimum structural return loss15 Figure A.5 Curves of maximum attenuation and power18 Figure A.6 Minimum structural return loss19 Table 1 Test schedule for qualification approval7 la
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-61196-2-1997 IEC-61196-2-1993 BS EN 61196 1997 IEC 1993
链接地址:https://www.31doc.com/p-3744740.html