BS-EN-923-2005-A1-2008.pdf
《BS-EN-923-2005-A1-2008.pdf》由会员分享,可在线阅读,更多相关《BS-EN-923-2005-A1-2008.pdf(56页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 923:2005 +A1:2008 Adhesives Terms and definitions ICS 83.180 ? Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:17:35 MDT -,-,- BS EN 923:2005+A1:2008 This British Sta
2、ndard was published under the authority of the Standards Policy and Strategy Committee on 18 November 2005 BSI 2008 ISBN 978 0 580 59267 6 National foreword This British Standard is the UK implementation of EN 923:2005+A1:2008. It supersedes BS EN 923:2005 which is withdrawn. The start and finish of
3、 text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“. The UK participation in its preparation was entrusted to Technical Committee PRI/52,
4、 Adhesives. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer
5、immunity from legal obligations. Amendments/corrigenda issued since publication DateComments 30 June 2008Implementation of CEN amendment A1:2008 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008
6、 20:17:35 MDT -,-,- EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 923:2005+A1 March 2008 ICS 83.180; 01.040.83 Supersedes EN 923:2005 English Version Adhesives - Terms and definitions Adhsifs - Termes et dfinitions Klebstoffe - Benennungen und Definitionen This European Standard was approved
7、by CEN on 12 September 2005 and includes Amendment 1 approved by CEN on 7 January 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date list
8、s and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the resp
9、onsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, I
10、celand, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue
11、 de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 923:2005+A1:2008: E Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770
12、001 Not for Resale, 08/14/2008 20:17:35 MDT -,-,- EN 923:2005+A1:2008 (E) 2 Contents Page Foreword3 Introduction.4 1 Scope 5 2 Terms and definitions .5 2.1 Adhesives.5 2.2 Functional adhesive components9 2.3 Chemical base products .12 2.4 Adhesive properties 20 2.5 Material and material treatment24
13、2.6 Bonding 26 2.7 Bond properties.32 Annex A (informative) Adhesives36 Annex B (informative) Adhesives joints38 BS EN 923:2005+A1:2008 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:17:35
14、 MDT -,-,- EN 923:2005+A1:2008 (E) 3 Foreword This European Standard (EN 923:2005+A1:2008) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This document shall be given the status of a national standard, either by publication of an identical
15、 text or by endorsement, at the latest by September 2008 and conflicting national standards shall be withdrawn at the latest by September 2008. This document includes Amendment 1, approved by CEN on 2008-01-07. This European Standard supersedes !EN 923:2005“. The start and finish of text introduced
16、or altered by amendment is indicated in the text by tags ! “. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finlan
17、d, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 923:2005+A1:2008 Copyright British Standards Institution Provided by IHS under
18、license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:17:35 MDT -,-,- EN 923:2005+A1:2008 (E) 4 Introduction This European Standard comprises terms peculiar to, or in general use in, the adhesive and adhesive processing industry. The terms defined have been
19、 classified so that, as far as possible, related concepts (adhesives, functional adhesive components, chemical base products, adherents, adhesives properties, bonding, and bond properties) are grouped together. All definitions are numbered and an alphabetical index which includes all terms is provid
20、ed at the end of this European Standard. The numbering of the individual definitions is the same in all three versions (English, French and German) of this European Standard. Consequently this European Standard can be used as a dictionary, combined with one or both of the other versions as an aid fo
21、r translation of terms into French or German, as a source of information about related concepts in the adhesive industry or to provide a term for a concept. In order to find: a) the definition of a term; look up the term in the alphabetical index at the end of this European Standard. The index will
22、refer to the number in this European Standard. The definition, the term and any synonyms appear by the number; b) information about related terms; look up the term in the alphabetical index to find its number in this European Standard. When the term has been located in this European Standard, the re
23、lated concepts can be found in the same subdivision; c) the translation of a term into the French or German language; look up the number of this term in this European Standard and locate the translation of the term and the definition under the same number in the standard of the foreign version. BS E
24、N 923:2005+A1:2008 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:17:35 MDT -,-,- EN 923:2005+A1:2008 (E) 5 1 Scope This European Standard defines terms used in the adhesive industry and t
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 923 2005 A1 2008
链接地址:https://www.31doc.com/p-3744835.html