BS-EN-ISO-13918-1998.pdf
《BS-EN-ISO-13918-1998.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-13918-1998.pdf(28页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 13918:1998 Welding Studs and ceramic ferrules for arc stud welding The European Standard EN ISO 13918:1998 has the status of a British Standard ICS 25.160.20 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:04:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN IS
2、O 13918:1998 This British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 December 1998 BSI 05-1999 ISBN 0 580 30031 5 National foreword This British Standard is the Engli
3、sh language version of EN ISO 13918:1998. The UK participation in its preparation was entrusted to Technical Committee WEE/-/1, Briefing committee for welding, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enqui
4、ries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references Attentio
5、n is drawn to the fact that CEN and CENELEC standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement international or European publications referred to in this document may
6、 be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British S
7、tandards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN ISO title page, pages 2 to 22 and a back cover.
8、This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:04:52 GMT+00:00 20
9、06, Uncontrolled Copy, (c) BSI BS EN ISO 13918:1998 BSI 05-1999i Contents Page National forewordInside front cover Foreword2 Text of EN ISO 139185 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:04:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldu
10、n, na, Sun Nov 19 09:04:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 13918 October 1998 ICS 25.160.20 Descriptors: Welding, arc welding, studs, bushings, ceramics, dimensions English version Welding Studs and ceramic ferrules for arc stud wel
11、ding (ISO 13918:1998) Soudage Goujons et bagues en cramique pour le soudage larc des goujons (ISO 13918:1998) Schweien Bolzen und Keramikringe zum Lichtbogenbolzenschweien (ISO 13918:1998) This European Standard was approved by CEN on 14 May 1998. CEN members are bound to comply with the CEN/CENELEC
12、 Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN
13、member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN mem
14、bers are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normal
15、isation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1998 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 13918:1998 E Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:04:52 G
16、MT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 13918:1998 BSI 05-1999 2 Foreword The text of prEN ISO 13918:1998 has been prepared by Technical Committee CEN/TC 121 “Welding”, the secretariat of which is held by DS, in collaboration with Technical Committee ISO/TC 44 “Welding and allied processes”
17、. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This European Standard is considered to be a supporting standard to those application and product standards which in themselves support an essential safety requ
18、irement of a New Approach Directive and which make reference to this European Standard. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 1999, and conflicting national standards shall be with
19、drawn at the latest by April 1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, L
20、uxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:04:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 13918-1998 BSI 05-19993 Contents Page Foreword2 1Scope5 2Normative references5 3Definitions6
21、4Dimensions and mass of studs6 4.1General6 4.2Threaded stud (PD)6 4.3Unthreaded stud (UD)8 4.4Shear connector (SD)9 4.5Threaded stud with flange (FD)11 4.6Threaded stud with reduced shaft (RD)13 4.7Threaded stud (PT)15 4.8Unthreaded stud (UT)16 4.9Stud with internal thread (IT)17 5Dimensions of cera
22、mic ferrules18 5.1General18 5.2Ceramic ferrule for threaded stud (PF)18 5.3Ceramic ferrule for unthreaded stud and shear connector (UF)18 5.4Ceramic ferrule for threaded stud with reduced shaft (RF)19 6Material20 7Manufacture and finish21 7.1Threaded studs (PD), unthreaded studs (UD), threaded studs
23、 with reduced shaft (RD)21 7.2Shear connectors (SD)21 7.3Threaded studs with flange (FD), threaded studs (PT), unthreaded studs (UT), studs with internal thread (IT)21 8Marking21 8.1Studs21 8.2Ceramic ferrules21 9Designation22 9.1Studs22 9.2Ceramic ferrules22 Figure 1 Threaded stud (PD)6 Figure 2 Un
24、threaded stud (UD)8 Figure 3 Shear connector (SD)9 Figure 4 Threaded stud with flange (FD)11 Figure 5 Threaded stud with reduced shaft (RD)13 Figure 6 Threaded stud (PT)15 Figure 7 Unthreaded stud (UT)16 Figure 8 Stud with internal thread (IT)17 Page Figure 9 Ceramic ferrule for threaded stud (PF)18
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 13918 1998
链接地址:https://www.31doc.com/p-3745007.html