BS-EN-62013-2-2001 IEC-62013-2-2000.pdf
《BS-EN-62013-2-2001 IEC-62013-2-2000.pdf》由会员分享,可在线阅读,更多相关《BS-EN-62013-2-2001 IEC-62013-2-2000.pdf(16页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 62013-2:2001 IEC 62013-2:2000 Caplights for use in mines susceptible to firedamp Part 2: Performance and other safety-related matters The European Standard EN 62013-2:2000 has the status of a British Standard ICS 73.100.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED
2、BY COPYRIGHT LAW Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 14:15:44 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 62013-2:2001 This British Standard, having been prepared under the direction of the Electrotechnical Sector Committee, was published under the authority of the Standards
3、Committee and comes into effect on 15 April 2001 BSI 04-2001 ISBN 0 580 37139 5 National foreword This British Standard is the official English language version of EN 62013-2:2000. It is identical with IEC 62013-2:2000. It supersedes BS 4945:1989 which is withdrawn. The UK participation in its prepa
4、ration was entrusted by Technical Committee GEL/31, Electrical apparatus for use in explosive atmospheres, to Subcommittee GEL/31/14, Type of protection “e” and “n”, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary.
5、 From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-refer
6、ences Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement these international or European publications may be found
7、 in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards
8、are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change,
9、 and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 13 and a back cover. The BSI copyright date displayed in this docum
10、ent indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 14:15:44 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARDEN 62013-2 NORME EUROPENNE EUROPISCHE NORMDecember 2000 CENELEC Europ
11、ean Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2000 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for
12、CENELEC members. Ref. No. EN 62013-2:2000 E ICS 29.260.20 English version Caplights for use in mines susceptible to firedamp Part 2: Performance and other safety-related matters (IEC 62013-2:2000) Lampes-chapeaux pour mines grisouteuses Partie 2: Performance et autres considrations concernant la scu
13、rit (CEI 62013-2:2000) Kopfleuchten fr schlagwettergefhrdete Grubenbaue Teil 2: Gebrauchstauglichkeit und Sicherheit (IEC 62013-2:2000) This European Standard was approved by CENELEC on 2000-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the cond
14、itions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in t
15、hree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechn
16、ical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 14:15:44 GMT+00:00 2006, Uncontrol
17、led Copy, (c) BSI Foreword The text of document 31/325/FDIS, future edition 1 of IEC 62013-2, prepared by IEC TC 31, Electrical apparatus for explosive atmospheres, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62013-2 on 2000-08-01. The following dates were fixed:
18、 latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 2001-05-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 2003-08-01 Annexes designated “normative“ are part of
19、the body of the standard. In this standard, annexes A and ZA are normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62013-2:2000 was approved by CENELEC as a European Standard without any modification. _ Page 2 EN 620132:2000 Licensed Copy:
20、 sheffieldun sheffieldun, na, Fri Nov 10 14:15:44 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BSI 04-2001 CONTENTS Page Clauses 1Scope 4 2Normative references. 4 3Definitions . 4 4General . 5 5Light output . 5 5.1Light sources 5 5.2Light source holder. 5 5.3Illumination cut-off angle. 5 5.4Illuminanc
21、e of main source . 6 5.5Auxiliary light source 6 5.6Focus . 6 6Reliability. 6 6.1Lamp life. 6 6.2Battery life (charge/discharge cycles) . 6 6.3Caplight useful working period 6 6.4Durability 6 7Ergonomics 7 7.1Mass. 7 7.2Ease of operation . 7 7.3Maintainability 7 8Type tests 7 8.1Illumination cut-off
22、 angle. 7 8.2Verification of the declared useful working period . 8 8.3Lamp life. 8 9Documentation. 9 10Marking . 9 Annex A (normative) Examples of the manufacturers instructions on user routine testing 10 A.1 Preparatory requirements 10 A.2 Evaluation procedure.10 A.3 Pass requirement 11 A.4 Specim
23、en test report .11 Annex ZA (normative) Normative references to international publications with their corresponding European publications 13 Figure A.1 Schematic drawing of a typical photometric sphere .11 Table 1 Illuminance of the main source . 6 Tabulation of tests.12 Page 3 EN 620132:2000 Licens
24、ed Copy: sheffieldun sheffieldun, na, Fri Nov 10 14:15:44 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BSI 04-2001 CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP Part 2: Performance and other safety-related matters 1 Scope This part of IEC 62013 details those performance and other safety features
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-62013-2-2001 IEC-62013-2-2000 BS EN 62013 2001 IEC 2000
链接地址:https://www.31doc.com/p-3745016.html