BS-EN-60352-7-2002.pdf
《BS-EN-60352-7-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60352-7-2002.pdf(30页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60352-7:2002 Incorporating Corrigendum No. 1 Solderless connections Part 7: Spring clamp connections General requirements, test methods and practical guidance The European Standard EN 60352-7:2002 has the status of a British Standard ICS 31.220.10 ? Licensed Copy: sheffieldun
2、sheffieldun, na, Fri Nov 10 09:33:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60352-7:2002 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Comm
3、ittee on 6 November 2002 BSI 13 November 2002 ISBN 0 580 40687 3 National foreword This British Standard is the official English language version of EN 60352-7:2002. It is identical with IEC 60352-7:2002. The UK participation in its preparation was entrusted by Technical Committee EPL/48, Electromec
4、hanical components and mechanical structures for electronic equipment, to Subcommittee EPL/48/2, Connectors for electronic equipment, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British St
5、andards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. T
6、his publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible in
7、ternational/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the E
8、N title page, pages 2 to 27 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments 14239 Corrigendum No. 1 13 November 2002Corrections to inside front cover and shoulder headings Licen
9、sed Copy: sheffieldun sheffieldun, na, Fri Nov 10 09:33:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD EN 60352-7 NORME EUROPENNE EUROPISCHE NORM October 2002 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches
10、Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60352-7:2002 E ICS 31.220.10 English version Solderless connections Part 7: Sprin
11、g clamp connections - General requirements, test methods and practical guidance (IEC 60352-7:2002) Connexions sans soudure Partie 7: Connexions ressort - Rgles gnrales, mthodes dessai et guide pratique (CEI 60352-7:2002) Ltfreie Verbindungen Teil 7: Federklemmverbindungen - Allgemeine Anforderungen,
12、 Prfverfahren und Anwendungshinweise (IEC 60352-7:2002) This European Standard was approved by CENELEC on 2002-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard witho
13、ut any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other languag
14、e made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, G
15、ermany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 09:33:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Foreword The text of document 48B/12
16、28/FDIS, future edition 1 of IEC 60352-7, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60352-7 on 2002-10-01. The following dates were fi
17、xed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2003-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2005-10-01 Annexes designated “normative“ are pa
18、rt of the body of the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60352-7:2002 was approved by CENELEC as a European Standard without any modification. _ 2 egaP 2002:725306 OSI NE Page 2 EN 603
19、527:2002 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 09:33:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI -253067 ? (2002:CEI)E 3 CONTENTS INTRODUCTION.4 1Scope and object5 2Normative references5 3Definitions 6 4Requirements .8 4.1Workmanship 8 4.2Tools.8 4.3Spring-clamp terminations .8 4.
20、4Design features .8 4.5Wires 8 4.6Spring-clamp connections9 5Tests9 5.1Testing9 5.2Test methods and test requirements 10 5.3Test schedules 17 6Practical guidance 23 6.1Current-carrying capacity.23 6.2Tool information.23 6.3Termination information.23 6.4Wire information24 6.5Connection information26
21、Figure 1 Examples of spring-clamp connections .7 Figure 2 Example of a spring-clamp terminal 7 Figure 3 Information for the wire deflection test 13 Figure 4 Test arrangement, vibration 14 Figure 5 Test arrangement, current method15 Figure 6 Basic test schedule (see 5.3.2) .21 Figure 7 Full test sche
22、dule (see 5.3.3)22 Figure 8 Correctly stripped wire25 Figure 9 Examples of stripping faults25 Table 1 Values of tensile strength.11 Table 2 Values for wire deflection test 12 Table 3 Vibration, test severities.14 Table 4 Rated current of the wires, initial and final contact resistance.16 Table 5 Num
23、ber of specimens required 18 Annex ZA (normative) Normative references to international publications with their corresponding European publications 27 3 egaP 2002:725306 OSI NE Page 3 EN 603527:2002 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 09:33:11 GMT+00:00 2006, Uncontrolled Copy, (c
24、) BSI 4 -253067 ? (2002:CEI)E INTRODUCTION This part of IEC 60352 includes requirements, tests and practical guidance information. Two test schedules are provided. a) The basic test schedule applies to spring-clamp connections which conform to all require- ments of clause 4. These requirements are d
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 60352 2002
链接地址:https://www.31doc.com/p-3745034.html