BS-EN-60810-2003.pdf
《BS-EN-60810-2003.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60810-2003.pdf(36页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60810:2003 Lamps for road vehicles Performance requirements The European Standard EN 60810:2003 has the status of a British Standard ICS 29.140.99 ? Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 14:32:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60810:2003 This
2、 British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 November 2003 BSI 28 November 2003 ISBN 0 580 42990 3 National foreword This British Standard is the official English language version of EN 60810:2003. It is identical with IEC 60810:2003. It su
3、persedes BS EN 60810:1995 which will be withdrawn on 2006-09-01. The UK participation in its preparation was entrusted by Technical Committee CPL/34, Lamps and related equipment, to Subcommittee CPL/34/1, Electric lamps, which has the responsibility to: A list of organizations represented on this su
4、bcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using
5、the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from
6、 legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the U
7、K. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 33 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy:
8、 sheffieldun sheffieldun, na, Fri Nov 10 14:32:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD EN 60810 NORME EUROPENNE EUROPISCHE NORM September 2003 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee f
9、r Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60810:2003 E ICS 29.140.99 Supersedes EN 60810:1994 + A1:2001 + A2:2001 English version La
10、mps for road vehicles - Performance requirements (IEC 60810:2003) Lampes pour vhicules routiers - Prescriptions de performances (CEI 60810:2003) Lampen fr Straenfahrzeuge - Anforderungen an die Arbeitsweise (IEC 60810:2003) This European Standard was approved by CENELEC on 2003-09-01. CENELEC member
11、s are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application
12、 to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has
13、 the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Swed
14、en, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 14:32:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Foreword The text of document 34A/1031/FDIS, future edition 3 of IEC 60810, prepared by SC 34A, Lamps, of IEC TC 34, Lamps and related equipment, was submitt
15、ed to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60810 on 2003-09-01. This European Standard supersedes EN 60810:1994 + A1:2001 + A2:2001 The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national s
16、tandard or by endorsement (dop) 2004-06-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2006-09-01 Annexes designated “normative“ are part of the body of the standard. Annexes designated “informative“ are given for information only. In this standard,
17、 annexes A to E and ZA are normative and annexes F and G are informative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60810:2003 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography,
18、 the following notes have to be added for the standards indicated: IEC 60068-2-64 NOTE Harmonized as EN 60068-2-64:1994 (not modified). IEC 60682 NOTE Harmonized as EN 60682:1993 (not modified). _ Page 2 EN 60810:2003 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 14:32:43 GMT+00:00 2006, Un
19、controlled Copy, (c) BSI 61800 IE2:C 300 3 CONTENTS 1 Scope.4 2 Normative references .4 3 Terms and definitions .5 4 Requirements and test conditions for filament lamps 6 4.1 Basic function and interchangeability.6 4.2 Torsion strength 6 4.3 Characteristic life T .6 4.4 Life B3 6 4.5 Lumen maintenan
20、ce 7 4.6 Resistance to vibration and shock .7 4.7 Glass-bulb strength .7 5 Filament lamp data.8 5.1 Rated life and lumen-maintenance values for road vehicle filament lamps tested under conditions as prescribed in Annex A .8 6 Requirements and test conditions for discharge lamps .10 6.1 Basic functio
21、n and interchangeability.10 6.2 Mechanical strength 10 6.3 Characteristic life T .10 6.4 Life B3 10 6.5 Lumen maintenance 10 6.6 Resistance to vibration and shock .10 6.7 Discharge lamps with integrated starting device 11 Annex A (normative) Life test conditions for filament lamps .12 Annex B (norma
22、tive) Vibration tests.14 Annex C (normative) Glass-bulb strength test 18 Annex D (normative) Life and lumen maintenance test conditions for discharge lamps 21 Annex E (normative) Bulb deflection test .23 Annex F (informative) Guidance for equipment design .24 Annex G (informative) Information for ba
23、llast design31 Annex ZA (normative) Normative references to international publications with their corresponding European publications 32 Bibliography33 Page 3 EN 60810:2003 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 14:32:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 61800 IE2:C 300 4 LA
24、MPS FOR ROAD VEHICLES PERFORMANCE REQUIREMENTS 1 Scope This International Standard is applicable to replaceable lamps (filament lamps and discharge lamps) to be used in headlamps, fog-lamps and signalling lamps for road vehicles. It is especially applicable to those lamps which are listed in IEC 608
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 60810 2003
链接地址:https://www.31doc.com/p-3745069.html