BS-EN-861-1998.pdf
《BS-EN-861-1998.pdf》由会员分享,可在线阅读,更多相关《BS-EN-861-1998.pdf(50页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 861:1998 Safety of woodworking machines Surface planing and thicknessing machines The European Standard EN 861:1997 has the status of a British Standard ICS 79.120.10 Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 06:06:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS
2、EN 861:1998 This British Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 January 1998 BSI 04-1999 ISBN 0 580 28669 X National foreword This British Standard is the English languag
3、e version of EN 861:1997. The UK participation in its preparation was entrusted to Technical Committee MTE/23, Woodworking machines, which has the responsibility to: aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals
4、for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement internation
5、al or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include al
6、l the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and
7、 ii, the EN title page, pages 2 to 44, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComment
8、s Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 06:06:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 861:1998 BSI 04-1999i Contents Page National forewordInside front cover Foreword2 Text of EN 8615 Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 06:06:16 GMT+00:00 2006, Uncontr
9、olled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 06:06:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 861 July 1997 ICS 79.120.10 Descriptors: Woodworking machinery, planing machines, surface planing machines, com
10、bined machines, safety of machines, dangerous machines, hazards, safety measures, specification, design, safety devices, dimensions, hazardous areas English version Safety of woodworking machines Surface planing and thicknessing machines Scurit des machines pour le travail du bois Machines combines
11、raboter et dgauchir Sicherheit von Holzbearbeitungsmaschinen Kombinierte Abricht und Dickenhobelmaschinen This European Standard was approved by CEN on 1997-06-18. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standa
12、rd the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, G
13、erman). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark,
14、 Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-10
15、50 Brussels 1997 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 861:1997 E Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 06:06:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 861:1997 BSI 04-1999 2 Foreword This European
16、 Standard has been prepared by Technical Committee CEN/TC 142 Woodworking machines Safety, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 1998, an
17、d conflicting national standards shall be withdrawn at the latest by January 1998. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with E
18、U Directive(s), see informative Annex ZA, which is an integral part of this standard. Organization contributing to the preparation of the European standard include the European Committee of Woodworking Machinery Manufacturers “EUMABOIS”. The European Standards prepared by CEN/TC 142 are particular t
19、o woodworking machines and complement the relevant A and B standards on the subject of general safety (see introduction of EN 292-1:1991 for description of A, B and C standards). Common requirements for tooling are given in EN 847-1:1997. According to the CEN/CENELEC Internal Regulations, the nation
20、al standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Switzerland and the United Kingdom. Contents Pa
21、ge Foreword2 0Introduction3 1Scope5 2Normative references5 3Definitions and terminology6 3.1Definitions6 3.2Terminology7 4List of hazards7 5Safety requirements and/or measures10 5.1Controls10 5.2Protection against mechanical hazards14 5.3Protection against non-mechanical hazards23 6Information for u
22、se25 6.1Warning device25 6.2Marking25 6.3Instruction handbook25 Annex A (informative) Guidance for the design of bridge type guard27 Annex B (normative) Specific requirements for the tools31 Annex C (informative) Hand fed surface and thickness planing machines; safe working practice31 Annex D (norma
23、tive) Tests for guards for surface planing and thicknessing machines40 Annex E (normative) Table lip resistance test41 Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU DirectivesInside back cover Figure 1 Surface planing and thickne
24、ssing machine8 Figure 2 Minimum shaft diameter for anti-kickback device16 Figure 317 Figure 418 Figure 519 Figure 619 Figure 721 Figure 8a22 Figure 8b22 Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 06:06:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 861:1997 BSI 04-19993 Page Figure 923
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 861 1998
链接地址:https://www.31doc.com/p-3745144.html