BS-EN-61000-4-15-1998 IEC-61000-4-15-1997.pdf
《BS-EN-61000-4-15-1998 IEC-61000-4-15-1997.pdf》由会员分享,可在线阅读,更多相关《BS-EN-61000-4-15-1998 IEC-61000-4-15-1997.pdf(28页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61000-4-15:1998 IEC 61000-4-15:1997 Incorporating Amendment No. 1 Electromagnetic compatibility (EMC) Part 4-15: Testing and measurement techniques Flickermeter Functional and design specifications The European Standard EN 61000-4-15:1998, with the incorporation of amendment A
2、1:2003, has the status of a British Standard ICS 33.100.20 ? BS EN 61000-4-15:1998 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Standards Board and comes into effect on 15 July 1998 BSI 6 November 2003
3、ISBN 0 580 30061 7 National foreword This British Standard is the English language version of EN 61000-4-15:1998. It is identical with IEC 61000-4-15:1997, Edition 1.1 which comprises Edition 1:1997 consolidated by the incorporation of amendment 1:2003. The UK participation in its preparation was en
4、trusted by Technical Committee GEL/210, Electromagnetic compatibility, to Subcommittee GEL/210/8, EMC Low frequency phenomena, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or pr
5、oposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement
6、these international or European publications may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all
7、 the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 25 an
8、d a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Sidelining in this document indicates the most recent changes by amendment. Amendments issued since publication Amd. No. DateComments 146546 November 2003Indicated by a sideline EUROPEAN
9、STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61000-4-15 April 1998 + A1 April 2003 ICS 33.100.20 Descriptors: Electromagnetic compatibility, tests, type testing: tests, measuring techniques, measuring instruments, flicker meters, design, performance evaluation, specifications English version Electrom
10、agnetic compatibility (EMC) Part 4-15: Testing and measurement techniques Flickermeter Functional and design specifications (includes amendment A1:2003) (IEC 61000-4-15:1997 + A1:2003) Compatibilit lectromagntique (CEM) Partie 4-15: Techniques dessai et de mesure Flickermtre Spcifications fonctionne
11、lles et de conception (inclut lamendement A1:2003) (CEI 61000-4-15:1997 + A1:2003) Elektromagnetische Vertrglichkeit (EMV) Teil 4-15: Prf- und Meverfahren Flickermeter Funktionsbeschreibung und Auslegungsspezifikation (enthlt nderung A1:2003) (IEC 61000-4-15:1997 + A1:2003) This European Standard wa
12、s approved by CENELEC on 1998-04-01; amendment A1 was approved by CENELEC on 2003-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date
13、 lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under t
14、he responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Icel
15、and, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Sec
16、retariat: rue de Stassart 35, B-1050 Brussels 1998 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61000-4-15:1998 + A1:2003 E EN 16000-4-:519189 ISB 6 mevoNbre 3002 2 Foreword The text of document 77A/180/FDIS, future edition 1 of
17、IEC 61000-4-15, prepared by SC 77A, Low-frequency phenomena, of IEC TC 77, Electromagnetic compatibility, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61000-4-15 on 1998-04-01. The following dates were fixed: Annexes designated “normative” are part of the body of
18、the standard. In this standard, Annex A and Annex ZA are normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 61000-4-15:1997 was approved by CENELEC as a European Standard without any modification. Foreword to amendment A1 The text of document
19、 77A/389/FDIS, future amendment 1 to IEC 61000-4-15:1997, prepared by SC 77A, Low-frequency phenomena, of IEC TC 77, Electromagnetic compatibility, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 61000-4-15:1998 on 2003-03-01. The following dates were
20、 fixed: Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC. Endorsement notice The text of amendment 1:2003 to the International Standard IEC 61000-4-15:1997 was approved by CENELEC as an amendment to the E
21、uropean Standard without any modification. latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 1999-01-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 2001-01-01 l
22、atest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 2003-12-01 latest date by which the national standards conflicting with the amendment have to be withdrawn(dow) 2006-03-01 Page 2 EN 61000415:1998 -00016-
23、43002:1A+7991:CEI 51 3 CONTENTS FOREWORD 5 INTRODUCTION 4 7 1 Scope and object . 5 2 Normative references. 5 3 Description of the instrument. 6 3.1 General . 6 3.2 Block 1 Input voltage adaptor and calibration checking circuit 6 3.3 Block 2 Square law demodulator . 7 3.4 Blocks 3 and 4 Weighting fil
24、ters, squaring and smoothing 7 3.5 Block 5 On-line statistical analysis. 7 3.6 Outputs 8 4 Specification . 9 4.1 Analogue response 9 4.2 Input transformer .10 4.3 Voltage adaptor .11 4.4 Internal generator for calibration checking11 4.5 Squaring demodulator11 4.6 Weighting filters.11 4.7 Overall res
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-61000-4-15-1998 IEC-61000-4-15-1997 BS EN 61000 15 1998 IEC 1997
链接地址:https://www.31doc.com/p-3745148.html