BS-IEC-TS-61813-2000.pdf
《BS-IEC-TS-61813-2000.pdf》由会员分享,可在线阅读,更多相关《BS-IEC-TS-61813-2000.pdf(26页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS IEC TS 61813:2000 Live working Care, maintenance and in-service testing of aerial devices with insulating booms ICS 29.260 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 03:30:30 GMT+00:00 2006, Uncont
2、rolled Copy, (c) BSI BS IEC TS 61813:2000 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 15 October 2001 BSI 15 October 2001 ISBN 0 580 3
3、8551 5 National foreword This British Standard reproduces verbatim IEC TS 61813:2000 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee PEL/78, Tools for live working, which has the responsibility to: A list of organizations re
4、presented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the ot
5、her, publications may contain identifiers from both systems. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index
6、”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself con
7、fer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulg
8、ate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the IEC TS title page, pages 2 to 22, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publi
9、cation Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 03:30:30 GMT+00:00 2006, Uncontrolled Copy, (c) BSI SPCIFICATION TECHNIQUE CEI IEC TECHNICAL SPECIFICATION TS 61813 Premire dition First edition 2000-10 Travaux sous tension Prcautions prendre, entretien et essais en
10、 service des quipements lvateurs bras isolants Live working Care, maintenance and in-service testing of aerial devices with insulating booms Numro de rfrence Reference number IEC/TS 61813:2000 BS IEC TS 61813:2000 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 03:30:30 GMT+00:00 2006, Uncont
11、rolled Copy, (c) BSI TS 61813 IEC:2000 2 CONTENTS Page FOREWORD 4 Clause 1 Scope 6 2 Normative references. 6 3 Definitions . 6 4 General . 7 5 Care of insulating components. 7 5.1Care whilst in transit. 7 5.2Care during work activities 7 5.3Storage. 8 6 Maintenance of aerial device insulating booms
12、8 6.1General 8 6.2Cleaning. 8 6.3Siliconing 9 7 Inspection 9 7.1Inspection before commencing work . 9 7.1.1Daily inspection of aerial devices.10 7.1.2Daily inspection of platforms and liners10 7.2Weekly inspections10 7.2.1Weekly inspection of aerial devices .10 7.2.2Weekly inspection of platforms an
13、d liners 11 7.3Periodic inspection of aerial devices11 8 Periodic testing.12 8.1Electrical tests.12 8.1.1Electrical tests on the aerial device upper boom with leakage monitoring system12 8.1.2Electrical tests on the aerial device upper boom without leakage monitoring system12 8.1.3Electrical tests o
14、n insulating lower boom insert or chassis insulating system .13 8.1.4On-site electrical tests on the aerial device upper boom with leakage monitoring system13 8.1.5Electrical tests on the jib(s)14 8.1.6Electrical tests on the liners.14 8.1.7Electrical tests on the platforms .14 8.2Mechanical tests14
15、 8.2.1Acoustic emission testing.14 9 Records15 10Repairing/refurbishing.15 Annex A (informative) Cleaning with isopropanol22 2 egaP 0002:31816 ST CEI SB BSI 15 October 2001 BS IEC TS 61813:2000 2 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 03:30:30 GMT+00:00 2006, Uncontrolled Copy, (c) B
16、SI TS 61813 IEC:2000 3 Page Figure 1 Upper boom test Aerial device with current leakage monitoring system .17 Figure 2 Upper boom test Aerial device without current leakage monitoring system 18 Figure 3 Insulating insert/chassis insulating system test.19 Figure 4 Puncture test on insulating platform
17、 or liner20 Figure 5 Surface test on insulating platform or liner21 Table 1 Periodic electrical test values for insulating aerial devices with lower test electrode system.16 Table 2 Periodic electrical test values for insulating aerial devices without lower test electrode system.16 Table 3 Periodic
18、electrical test values for insulating components of aerial devices.16 3 egaP 0002:31816 ST CEI SB BSI 15 October 2001 BS IEC TS 61813:2000 3 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 03:30:30 GMT+00:00 2006, Uncontrolled Copy, (c) BSI TS 61813 IEC:2000 4 INTERNATIONAL ELECTROTECHNICAL C
19、OMMISSION _ LIVE WORKING CARE, MAINTENANCE AND IN-SERVICE TESTING OF AERIAL DEVICES WITH INSULATING BOOMS FOREWORD 1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The
20、object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, the IEC publishes International Standards. Their preparation is entrusted to technical committees; any IEC
21、National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization for Standardiz
22、ation (ISO) in accordance with conditions determined by agreement between the two organizations. 2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has repr
23、esentation from all interested National Committees. 3)The documents produced have the form of recommendations for international use and are published in the form of standards, technical specifications, technical reports or guides and they are accepted by the National Committees in that sense. 4)In o
24、rder to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regional standards. Any divergence between the IEC Standard and the corresponding national or regional standard shall b
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS IEC TS 61813 2000
链接地址:https://www.31doc.com/p-3745209.html