BS-EN-ISO-527-4-1997 BS-2782-3-METHOD-326F-1997.pdf
《BS-EN-ISO-527-4-1997 BS-2782-3-METHOD-326F-1997.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-527-4-1997 BS-2782-3-METHOD-326F-1997.pdf(20页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 527-4:1997 BS 2782-3: Method 326F:1997 Plastics Determination of tensile properties Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites The European Standard EN ISO 527-4:1997 has the status of a British Standard ICS 83.120 Licensed Co
2、py: sheffieldun sheffieldun, na, Mon Nov 20 02:16:00 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 527-4:1997 This British Standard, having been prepared under the direction of the Sector Board for Materials and Chemicals, was published under the authority of the Standards Board and comes int
3、o effect on 15 July 1997 BSI 09-1999 ISBN 0 580 27558 2 National foreword This British Standard is the English language version of EN ISO 527-4:1997. It is identical with ISO 527-4:1997. The UK participation in its preparation was entrusted to Technical Committee PRI/42, Fibre reinforced thermosetti
4、ng plastics and prepregs, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European de
5、velopments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that Annex ZA lists normative references to international publications with their corresponding European public
6、ations. The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard
7、 does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an
8、inside front cover, pages i and ii, the EN ISO title page, page 2, the ISO title page, pages ii to iv, pages 1 to 8 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.
9、 Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:16:00 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 527-4:1997 BSI 09-1999i Contents Page National forewordInside front cover Foreword2 Forewordiii Text of ISO 527-41 Licensed C
10、opy: sheffieldun sheffieldun, na, Mon Nov 20 02:16:00 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:16:00 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 527-4 April 1997 ICS 83.120 De
11、scriptors: See ISO document English version Plastics Determination of tensile properties Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997) Plastiques Dtermination des proprits en traction Partie 4: Conditions dessai pour les composites plastiq
12、ues renforcs de fibres isotropes et orthotropes (ISO 527-4:1997) Kunststoffe Bestimmung der Zugeigenschaften Teil 4: Prfbedingungen fr isotrop und anisotrop faserverstrkte Kunststoffverbundwerkstoffe (ISO 527-4:1997) This European Standard was approved by CEN on 1997-03-28. CEN members are bound to
13、comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central
14、 Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the
15、official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardizati
16、on Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1997 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 527-4:1997 E Licensed Copy: sheffieldun sheffieldun,
17、 na, Mon Nov 20 02:16:00 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 527-4:1997 BSI 09-1999 2 Foreword The text of the International Standard ISO 527-4:1997 has been prepared by Technical Committee ISO/TC 61 “Plastics” in collaboration with Technical Committee CEN/TC 249 “Plastics”, the secret
18、ariat of which is held by IBN. ISO 527 contains the following parts with the general title: “Plastics Determination of tensile properties”. Part 1: General principles Part 2: Test conditions for moulding and extrusion plastics Part 3: Test conditions for films and sheets Part 4: Test conditions for
19、isotropic and orthotropic fibre-reinforced plastic composites Part 5: Test conditions for unidirectional fibre-reinforced plastic composites This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October
20、 1997, and conflicting national standards shall be withdrawn at the latest by October 1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Ge
21、rmany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the International Standard ISO 527-4:1997 was approved by CEN as a European Standard without any modification. NOTENormative references
22、 to International Standards are listed in Annex ZA (normative). Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:16:00 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:16:00 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 527-4:1997 ii B
23、SI 09-1999 Contents Page Forewordiii 1Scope1 2Normative references1 3Principle1 4Definitions1 5Apparatus2 6Test specimens2 7Number of specimens5 8Conditioning5 9Procedure5 10Calculation and expression of results5 11Precision5 12Test report5 Annex A (normative) Specimen preparation6 Annex B (informat
24、ive) Alignment of specimens7 Annex ZA (normative) Normative references to international publications with their relevant European publications8 Figure 1 Stress-strain curve2 Figure 2 Fibre-reinforced plastic composite showing axes of symmetry2 Figure 3 Type 1B specimen3 Figure 4 Type 2 and type 3 sp
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-ISO-527-4-1997 BS-2782-3-METHOD-326F-1997 BS EN ISO 527 1997 2782 METHOD 326
链接地址:https://www.31doc.com/p-3745237.html