《BS-EN-ISO-105-X10-1996.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-105-X10-1996.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 105-X10:1996 Textiles Tests for colour fastness Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings The European Standard EN ISO 105-X10:1995 has the status of a British Standard ICS 59.080.10 Licensed Copy: sheffieldun sheffieldun, na, Su
2、n Nov 19 13:22:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 105-X10:1996 This British Standard, having been prepared under the direction of the Sector Board for Materials and Chemicals, was published under the authority of the Standards Board and comes into effect on 15 February 1996 BSI
3、11-1999 The following BSI references relate to the work on this standard: Committee reference TCI/25 Draft announced in BSI News February 1995 ISBN 0 580 23985 3 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee TCI/25, Che
4、mical properties, upon which the following bodies were represented: Association of Consulting Scientists Association of Suppliers to the British Clothing Industry British Apparel and Textile Confederation British Clothing Industry Association British Measurement and Testing Association British Retai
5、l Consortium Chemical Industries Association Consumer Policy Committee of BSI Fabric Care Research Association Ltd. Home Laundering Consultative Council International Wool Secretariat Mail Order Traders Association Ministry of Defence National Wool Textile Export Corporation SATRA Footwear Technolog
6、y Centre Soap and Detergent Industry Association Society of Dyers and Colourists Textile Finishers Association Participation in the detailed technical work was undertaken by the Society of Dyers and Colourists Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffi
7、eldun, na, Sun Nov 19 13:22:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 105-X10:1996 BSI 11-1999i Contents Page Committees responsibleInside front cover National forewordii Foreword2 1Scope3 2Normative references3 3Principle3 4Apparatus and reagents3 5Test specimen3 6Procedure3 7Test rep
8、ort4 Annex ZA (normative) Normative references to international publications with their relevant European publications5 List of referencesInside back cover Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:22:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 105-X10:1996 ii BSI 11-1999
9、 National foreword This British Standard has been prepared by Technical Committee TCI/25 and is the English language version of EN ISO 105-X10:1995 Textiles Tests for colour fastness Part X10 Assessment of migration of textile colours into polyvinyl chloride coatings, published by the European Commi
10、ttee for Standardization (CEN). It was derived by CEN from ISO 105-X10:1993, published by the International Organization for Standardization (ISO). This British Standard supersedes the corresponding method in BS 1006:1990, which is withdrawn by amendment. A British Standard does not purport to inclu
11、de all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references Publication referred toCorresponding British Standard ISO 105-A01:19
12、89BS EN ISO 105 Textiles Tests for colour fastness Part A01:1996 General principles of testing ISO 105-A03:1993BS EN 20105 Textiles Tests for colour fastness Part A03:1995 Grey scale for assessing staining Summary of pages This document comprises a front cover, an inside front cover, pages i and ii,
13、 the EN ISO title page, pages 2 to 6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 1
14、3:22:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 105-X10 November 1995 ICS 59.080.10 Descriptors: Textiles, coated fabrics, polyvinyl chloride, fabrics coated with plastics, dyes, tests, determination, colour fastness English version Textile
15、s Tests for colour fastness Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings (ISO 105-X10:1993) Textiles Essais de solidit des teintures Partie X10: Evaluation de la migration des teintures des textiles dans les enductions de polychlorure de vinyle (ISO 105-X10:1
16、993) Textilien Farbechtheitsprfungen Teil X10: Bestimmung der Migration von Textilfarbstoffen in Polyvinylchlorid-Beschichtungen (ISO 105-X10:1993) This European Standard was approved by CEN on 1995-07-28. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the
17、conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in t
18、hree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of
19、Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat
20、: rue de Stassart 36, B-1050 Brussels 1995 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members Ref. No. EN ISO 105-X10:1995 E Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:22:13 GMT+00:00 2006, Uncontrolled Copy, (c)
21、BSI EN ISO 105-X10:1995 BSI 11-1999 2 Foreword The text of the International Standard from ISO/TC 38, Textiles, of the International Organization for Standardization (ISO) has been taken over as a European Standard by the Technical Committee CEN/TC 248, Textiles and textile products. This European S
22、tandard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 1996, and conflicting national standards shall be withdrawn at the latest by May 1996. According to CEN/CENELEC Internal Regulations, the following countries a
23、re bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. NOTENormative references to International Standards are listed in Annex ZA
24、 (normative). Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:22:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 105-X10:1995 BSI 11-19993 1 Scope This part of ISO 105 specifies a method for determining the resistance of the colour in textile fabrics to migration into polyvinyl chlori
25、de (PVC) which contains plasticizer. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 105. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parti
26、es to agreements based on this part of ISO 105 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 105-A01:1989, Textiles Tests for colour fastne
27、ss Part A01: General principles of testing. ISO 105-A03:1993, Textiles Tests for colour fastness Part A03: Grey scale for assessing staining. 3 Principle A specimen of a textile impregnated with plasticizer is brought into contact with a white pigmented polyvinyl chloride foil and kept under pressur
28、e at 80 C. Then the specimen and excess plasticizer are removed from the foil and the staining of the foil is assessed with the grey scale. 4 Apparatus and reagents 4.1 Testing device, consisting of a frame of stainless steel into which a weight-piece of mass 5 kg and base 60 mm 115 mm is closely fi
29、tted, so that a pressure of 12,5 kPa can be applied to test specimens measuring 40 mm 100 mm placed between glass or acrylic resin plates. Up to 10 specimens can be tested simultaneously, each one separated by a glass plate. If the weight-piece is removed during the test, the testing device shall be
30、 so constructed that the pressure of 12,5 kPa remains unchanged. NOTE 1Other devices may be used, provided that the same results are obtained as with the apparatus described here. 4.2 Oven, maintained at 80 C 2 C. 4.3 Graduated pipette or dropping tube, with which the plasticizer can be applied. 4.4
31、 White pigmented polyvinyl chloride foil, of thickness 0,5 mm 0,1 mm. If ready-for-use white pigmented polyvinyl chloride foil cannot be obtained, it may be prepared as follows: A mixture of 65 g of polyvinyl chloride powder, 2 g of stabilizer and 5 g of titanium dioxide is thoroughly stirred with 3
32、5 g of dioctyl phthalate. The homogenized paste is poured on to a glass plate to a thickness of 0,5 mm 0,1 mm and the paste left for 5 min at 170 C to gel. 4.5 Dioctyl phthalate. Other plasticizers or mixtures of plasticizers can also be used. 4.6 Petroleum ether (boiling point below 80 C). 4.7 Grey
33、 scale for assessing staining, complying with ISO 105-A03:1993. 5 Test specimen 5.1 Use a specimen of fabric measuring 40 mm 100 mm. 5.2 Cut out a piece of the white pigmented polyvinyl chloride foil (4.4) measuring 40 mm 100 mm. 6 Procedure 6.1 Clean the piece of white PVC foil by wiping with an un
34、dyed cloth impregnated with petroleum ether (4.6) and place it on the glass plate of the test apparatus (4.1). Then place the specimen on the foil with the side of the fabric to be tested facing the foil and apply uniformly drop by drop an amount of plasticizer (4.5) equal to the mass of the specime
35、n. (In the case of heavy fabrics, care shall be taken that the plasticizer is distributed uniformly on the specimen.) Then cover the composite specimen with another glass plate and subject it to a pressure of 12,5 kPa in the test apparatus. If a weight is used, it shall be preheated to the test temp
36、erature. If the dimensions of the composite specimen differ from 40 mm 100 mm, use a weightpiece such that a pressure of 12,5 kPa is applied to the specimen. 6.2 Place the test apparatus containing the specimen in the oven (4.2) for 3,5 h at 80 C 2 C. 6.3 Remove the specimen from the PVC foil. Rinse
37、 the foil on the glass plate with petroleum ether and allow the latter to evaporate at room temperature. CAUTION Petroleum ether is flammable. 6.4 Immediately after drying, assess the staining of the polyvinyl chloride foil by means of the grey scale (4.7). Licensed Copy: sheffieldun sheffieldun, na
38、, Sun Nov 19 13:22:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 105-X10:1995 4 BSI 11-1999 7 Test report The test report shall include the following particulars: a) the number and date of publication of this part of ISO 105 (i.e. ISO 105-X10:1993); b) all details necessary for the identifica
39、tion of the sample tested; c) the type of plasticizer used; d) the numerical rating for the staining of the white pigmented polyvinyl chloride foil. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:22:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 105-X10:1995 BSI 11-19995 Annex ZA (n
40、ormative) Normative references to international publications with their relevant European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publication
41、s are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. PublicationYearTit
42、leENYear ISO 105-A011994Textiles Tests for colour fastness Part A01: General principles of testing EN ISO 105-A011994 ISO 105-A031993Textiles Tests for colour fastness Part A03: Grey scale for assessing staining EN 20105-A031994 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:22:13 GMT+00:
43、00 2006, Uncontrolled Copy, (c) BSI 6 blank Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:22:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 105-X10:1996 BSI 11-1999 List of references See national foreword. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:22:13 GMT+00:0
44、0 2006, Uncontrolled Copy, (c) BSI BS EN ISO 105-X10:1996 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is
45、incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if
46、 anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service call
47、ed PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for internation
48、al standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technica
49、l Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright
链接地址:https://www.31doc.com/p-3745238.html