BS-EN-ISO-10821-2005.pdf
《BS-EN-ISO-10821-2005.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-10821-2005.pdf(88页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 10821:2005 Industrial sewing machines Safety requirements for sewing machines, units and systems The European Standard EN ISO 10821:2005 has the status of a British Standard ICS 61.080 ? BS EN ISO 10821:2005 This British Standard was published under the authority of the St
2、andards Policy and Strategy Committee on 2 September 2005 BSI 2 September 2005 ISBN 0 580 46419 9 National foreword This British Standard is the official English language version of EN ISO 10821:2005. It is identical with ISO 10821:2005. The UK participation in its preparation was entrusted to Techn
3、ical Committee TCI/33, Textile machinery, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in
4、 the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsib
5、le for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK in
6、terests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to vi, pages 1 to 76, the Annex ZA pag
7、e and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10821 July 2005 ICS 61.080 English Version Industrial sewing machine
8、s - Safety requirements for sewing machines, units and systems (ISO 10821:2005) Machines coudre industrielles - Exigences de scurit pour machines coudre, units et systmes de couture (ISO 10821:2005) Industrienhmaschinen - Sicherheitsanforderungen an Nhmaschinen, Nheinheiten und Nhanlagen (ISO 10821:
9、2005) This European Standard was approved by CEN on 22 April 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
10、 references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN mem
11、ber into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lit
12、huania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CENAll
13、 rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10821:2005: E Foreword This document (EN ISO 10821:2005) has been prepared by Technical Committee ISO/TC 148 “Sewing machines“ in collaboration with CMC. This European Standard shall be
14、given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2006, and conflicting national standards shall be withdrawn at the latest by January 2006. This document has been prepared under a mandate given to CEN by the European Comm
15、ission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations
16、 of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia,
17、Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 10821:2005 has been approved by CEN as EN ISO 10821:2005 without any modifications. EN ISO 10821:2005 Reference number ISO 10821:2005(E) INTERNATIONAL STANDARD ISO 10821 First edition 2005-07-01 Industrial sewing machi
18、nes Safety requirements for sewing machines, units and systems Machines coudre industrielles Exigences de scurit pour machines coudre, units et systmes de couture EN ISO 10821:2005 ii iii Contents Page Foreword. v Introduction. vi 1Scope 1 2Normative references1 3Terms and definitions .3 4Significan
19、t hazards5 4.1General5 4.2Mechanics.5 4.3Electricity/Control6 4.4Thermal hazards 6 4.5Noise .6 4.6Radiation.6 4.7Ergonomics7 4.8Special hazards7 4.9Danger zones .8 5Safety measures and requirements.15 5.1General principles15 5.2Requirements for all types of industrial sewing machines.15 5.2.1Mechani
20、cal equipment 15 5.2.2Electrical equipment/control/control gear 18 5.2.3Thermal requirements.20 5.2.4Noise .20 5.2.5Radiation.21 5.2.6Ergonomics22 5.3Specific requirements for particular types of industrial sewing machines.22 5.3.1Button, buttonhole and programmable pattern sewing machines, bartacki
21、ng machines.22 5.3.2Quilting machines23 5.3.3Bag closing sewing machines in the packaging industry.23 5.3.4Embroidery machines .23 5.3.5Glove sewing machines24 5.3.6Sewing machines for shoe repair 24 5.3.7Blindstitch sewing machines .24 5.3.8Linking machines.24 6Verification of safety requirements o
22、r measures.24 7Information on use and maintenance26 7.1General26 7.2Marking.26 7.3Warning of residual risk27 7.4Instructions 27 7.4.1General information.27 7.4.2Particular information .28 Annex A (normative) Finger deflecting device.29 Annex B (normative) Warning of residual risk.32 Annex C (normati
23、ve) Noise test code .35 Annex D (normative) Needle breakage protection shield.50 Annex E (normative) Belt guard at sewing machine drive (motor)51 EN ISO 10821:2005 iv Annex F (informative) Safe fastening of belt pulley at drive shaft of clutch or positioning drives .53 Annex G (informative) Safe mou
24、nting of adaptable positioner/synchronizer at sewing machine shaft60 Annex H (informative) Safe mounting of sewing machine drives .61 Annex I (informative) Noise declaration examples66 Annex J (informative) Examples of noise reduction measures at the design stage.69 Annex K (normative) Written warni
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 10821 2005
链接地址:https://www.31doc.com/p-3745253.html