BS-EN-61358-1996 IEC-61358-1996.pdf
《BS-EN-61358-1996 IEC-61358-1996.pdf》由会员分享,可在线阅读,更多相关《BS-EN-61358-1996 IEC-61358-1996.pdf(32页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61358:1996 IEC 1358:1996 Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2) The European Standard EN 61358:1996 has the status of a British Standard ICS 17.220.20 Licensed Copy: sheffieldun sheffieldun, na
2、, Thu Nov 09 03:50:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61358:1996 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Standards Board and comes into effect on 15 December 1996 BSI 11-1998 The f
3、ollowing BSI references relate to the work on this standard: Committee reference PEL/13 Draft for comment 96/207919 DC ISBN 0 580 26322 3 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee PEL/13, Electricity meters, upon wh
4、ich the following bodies were represented: Building Automation and Mains Signalling Association (BAMSA) BEAMA Metering Association (BMA) Department of Trade and Industry Electricity Association Electricity Pool of England and Wales Energy Systems Trade Association Flag Association Institution of Ele
5、ctrical Engineers Office of Electricity Regulations (OFFER) United Kingdom Automatic Meter Reading Association Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 03:50:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61358:1996 BSI 11-1
6、998i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text on EN 61358:19963 List of referencesInside back cover Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 03:50:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61358:1996 ii BSI 11-1998 National for
7、eword This British Standard has been prepared by Technical Committee PEL/13 and is the English Language version of EN 61358:1996 Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2) published by the European Committee for Electrot
8、echnical Standardization (CENELEC). It is identical with IEC 1368:1996 published by International Electrotechnical Commission (IEC). A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Co
9、mpliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references Publication referred toCorresponding British Standard EN 60514:1995 (IEC 514:1975) BS EN 60514 Acceptance inspection of class 2 alternating-current watt-hour meters EN 61036:1992 (IEC:1990) B
10、S EN 61036:1993 Alternating current static watt-hour meters for active energy (classes 1 and 2) BS ISO 3534: Statistics. Vocabulary and symbols ISO 3534-1:1993BS ISO 3534-1:1993 Probability and general statistical terms ISO 3534-2:1993BS ISO 3534-2:1993 Statistical quality control Summary of pages T
11、his document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 26, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the ins
12、ide front cover. Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 03:50:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61358 June 1996 ICS 17.220.20 Descriptors: Acceptance inspection, static meter, active energy, direct connected, alternatin
13、g current English version Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2) (IEC 1358:1996) Contrle de rception des compteurs statiques dnergie active pour courant alternatif et branchement direct (classes 1 et 2) (CEI 1358:199
14、6) Annahmeprfung von elektronischen Wechselstrom-Wirkverbrauchzhlern fr direkten Anschlu (Klassen 1 und 2) (IEC 1358:1996) This European Standard was approved by CENELEC on 1996-03-05. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for gi
15、ving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official
16、 versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committe
17、es of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europi
18、sches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1996 Copyright reserved to CENELEC members Ref. No. EN 61358:1996 E Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 03:50:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 61358:1996 BSI 11-1998
19、 2 Foreword The text of document 13/1093/FDIS, future edition 1 of IEC 1358, prepared by IEC TC 13, Equipment for electrical energy measurement and load control, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61358 on 1996-03-05. The following dates were fixed: Anne
20、xes designated “normative” are part of the body of the standard. Annexes designated “informative” are given for information only. In this standard, annexes A and ZA are normative and annex B is informative. Annex ZA has been added by CENELEC. Contents Page Introduction3 1Scope3 2General remarks3 3No
21、rmative references4 4Definitions4 5Acceptance conditions for batches5 6Place of inspection5 7Test conditions5 8Inspection and test procedure6 9Requirements corresponding to different inspection procedures8 Annexe A (normative) Symbols23 Annexe B (informative) Bibliography24 Annexe ZA (normative) Nor
22、mative references to international publications with their corresponding European publications25 Page Figure 1 Diagram of the single sampling plan11 Figure 2 Diagram of the double sampling plan12 Figure 3 Acceptance trapezium (standard deviation method)13 Figure 4 Acceptance trapezium (average range
23、 method)14 Table 1 Reference conditions6 Table 2 Uncertainty of measurement6 Table 3 AC voltage tests7 Table 4 Starting current7 Table 5 Test points and limits of errors8 Table 6 Acceptance number c8 Table 7 Example of using random numbers9 Table 8 Sample plans10 Table 9 Double sampling plan12 Table
24、 10 Specified values for the standard deviation method13 Table 11 Specified values for the average range method14 Table 12a Operating characteristic curves N # 10015 Table 12b Operating characteristic curves 101 # N # 50016 Table 12c Operating characteristic curves 501 # N # 1 00017 Table 13a Accept
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-61358-1996 IEC-61358-1996 BS EN 61358 1996 IEC
链接地址:https://www.31doc.com/p-3745282.html