BS-EN-ISO-8662-6-1995 ISO-8662-6-1994.pdf
《BS-EN-ISO-8662-6-1995 ISO-8662-6-1994.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-8662-6-1995 ISO-8662-6-1994.pdf(16页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 8662-6:1995 ISO 8662-6: 1994 Hand-held portable power tools Measurement of vibrations at the handle Part 6: Impact drills The European Standard EN ISO 8662-6:1995 has the status of a British Standard Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 02:00:05 GMT+00:00
2、 2006, Uncontrolled Copy, (c) BSI BS EN ISO 8662-6:1995 This British Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 December 1995 BSI 09-1999 The following BSI references relate
3、to the work on this standard: Committee reference GME/21 Draft for comment 92/84672 DC ISBN 0 580 24874 7 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee GME/21, Mechanical vibration and shock, upon which the following bo
4、dies were represented: Federation of Civil Engineering Contractors Imperial College of Science, Technology and Medicine Institute of Sound and Vibration Research Institution of Mechanical Engineers Lloyds Register of Shipping Ministry of Defence Open University Power Generation Contractors Associati
5、on (BEAMA Ltd.) Railway Industry Association of Great Britain Society of British Aerospace Companies Limited Society of Environmental Engineers The following bodies were also represented in the drafting of the standard, through subcommittees and panels: Agricultural Engineers Association British Agg
6、regate Construction Materials Industries British Agricultural and Garden Machinery Association Ltd. British Compressed Air Society British Gas plc British Hydraulic Tool Manufacturers Association British Occupational Hygiene Society British Railways Board Department of the Environment (Building Rese
7、arch Establishment) Forestry Commission Health and Safety Executive Institute of Explosives Engineers Institute of Naval Medicine Institution of Electrical Engineers Medical Research Council Portable Electric Tool Manufacturers Association University College of Swansea University of Salford Amendmen
8、ts issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 02:00:05 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 8662-6:1995 BSI 09-1999i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Introduction3 1Scope3 2N
9、ormative references3 3Quantity to be measured3 4Instrumentation3 5Measurement direction and measurement location4 6Determination of working procedure4 7Measurement procedure and validity of measurements6 8Test report6 Annex A (informative) Model test report for impact drills7 Annex ZA (normative) No
10、rmative references to international publications with their relevant European publications10 Figure 1 Example of position and fastening of transducer and measurement direction4 Figure 2 Working position of operator5 List of referencesInside back cover Licensed Copy: sheffieldun sheffieldun, na, Sat
11、Nov 18 02:00:05 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 8662-6:1995 ii BSI 09-1999 National foreword This British Standard has been prepared by Technical Committee GME/21 and is the English language version of EN ISO 8662-6:1995 Hand-held portable power tools Measurement of vibrations a
12、t the handle Part 6: Impact drills published by the European Committee for Standardization (CEN). It is identical with ISO 8662-6:1994 published by the International Organization for Standardization (ISO). EN ISO 8662-6:1995 was produced as a result of international discussion in which the UK took a
13、n active part. Other Parts of ISO 8662 have been implemented in the BS EN 28662 series and the BS EN ISO 8662 series. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a
14、 British Standard does not of itself confer immunity from legal obligations. Cross-references Publication referred toCorresponding British Standard ISO 2787:1984BS 5344:1985 Methods for performance tests for rotary and percussive pneumatic tools EN 28662-1:1992BS EN 28662-1:1993 Hand-held portable p
15、ower tools ISO 8662-1:1992Measurement of vibrations at the handle Part 1. General Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN ISO title page, pages 2 to 10, an inside back cover and a back cover. This standard has been updated (see copyright
16、date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 02:00:05 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 8662-6 April 19
17、95 ICS 13.160; 25.140.10 Descriptors: Tools, power-operated tools, portable equipment, portable electric machine tools, percussive machines, drilling machines (tools), tests, vibration tests English version Hand-held portable power tools Measurement of vibrations at the handle Part 6: Impact drills
18、(ISO 8662-6:1994) Machines moteur portatives Mesurage des vibrations au niveau des poignes Partie 6: Perceuses percussion (ISO 8662-6:1994) Handgehaltene motorbetriebene Maschinen Messung mechanischer Schwingungen am Handgriff Teil 6: Schlagbohrmaschinen (ISO 8662-6:1994) This European Standard was
19、approved by CEN on 1995-02-15. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
20、 standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notifi
21、ed to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
22、 CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1995 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members Ref. No.
23、EN ISO 8662-6:1995 E Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 02:00:05 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 8662-6:1995 BSI 09-1999 2 Foreword The text of the International Standard ISO 8662-6:1994 has been prepared by Technical Committee ISO/TC 118, Compressors, pneumatic
24、 tools and pneumatic machines, in collaboration with CEN/TC 231, Mechanical vibration and shock. It has been submitted to Parallel Vote and has been approved by CEN on 1995-02-15 as a European Standard. This European Standard has been prepared under a mandate given to CEN by the European Commission
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-ISO-8662-6-1995 ISO-8662-6-1994 BS EN ISO 8662 1995 1994
链接地址:https://www.31doc.com/p-3745323.html