BS-EN-62135-1-2008.pdf
《BS-EN-62135-1-2008.pdf》由会员分享,可在线阅读,更多相关《BS-EN-62135-1-2008.pdf(66页珍藏版)》请在三一文库上搜索。
1、Resistance welding equipment Part 1: Safety requirements for design, manufacture and installation BS EN 62135-1:2008 raising standards worldwide NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI British Standards Licensed CopyChinese University of Hong Kong, 11/04/2009 08:13
2、, Uncontrolled Copy, (c) BSI National foreword This British Standard is the UK implementation of EN 62135-1:2008. It is identical to IEC 62135-1:2008. It supersedes BS 5924:1989 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/29, Resistance weldin
3、g. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2008 ISBN 978 0 580 56067 5 ICS 25.160.30 BRITISH STAN
4、DARDBS EN 62135-1:2008 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2009 Amendments issued since publication Amd. No. Date Text affected Licensed Co
5、pyChinese University of Hong Kong, 11/04/2009 08:13, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD EN 62135-1 NORME EUROPENNE EUROPISCHE NORM November 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotec
6、hnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62135-1:2008 E ICS 25.160 Supersedes EN 50063:1989 English version Resistance welding equipment - Part
7、 1: Safety requirements for design, manufacture and installation (IEC 62135-1:2008) Matriels de soudage par rsistance - Partie 1: Exigences de scurit pour la conception, la fabrication et linstallation (CEI 62135-1:2008) Widerstandsschweieinrichtungen - Teil 1: Sicherheitsanforderungen fr die Konstr
8、uktion, Herstellung und Errichtung (IEC 62135-1:2008) This European Standard was approved by CENELEC on 2008-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without
9、 any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language
10、made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark
11、, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 62135-1:2008 Licensed CopyChinese University of Hong K
12、ong, 11/04/2009 08:13, Uncontrolled Copy, (c) BSI EN 62135-1:2008 2 Foreword The text of document 26/377/FDIS, future edition 1 of IEC 62135-1, prepared by IEC TC 26, Electric welding, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62135-1 on 2008-10-01. This Europe
13、an standard supersedes EN 50063:1989 + corrigendum August 1990. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-01-01 latest date by which the national standards conflict
14、ing with the EN have to be withdrawn (dow) 2011-10-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62135-1:2008 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following not
15、es have to be added for the standards indicated: IEC 60085 NOTE Harmonized as EN 60085:2008 (not modified). IEC 60112 NOTE Harmonized as EN 60112:2003 (not modified). IEC 60364 NOTE Harmonized in HD 384 / HD 60364 series (modified). IEC 60990 NOTE Harmonized as EN 60990:1999 (not modified). _ BS EN
16、62135-1:2008 Licensed CopyChinese University of Hong Kong, 11/04/2009 08:13, Uncontrolled Copy, (c) BSI 3 EN 62135-1:2008 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for th
17、e application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the re
18、levant EN/HD applies. Publication Year Title EN/HD Year IEC 60204-1 (mod) - 1) Safety of machinery - Electrical equipment of machines - Part 1: General requirements EN 60204-1 2006 2) IEC 60364-4-41 (mod) 2005 Low-voltage electrical installations - Part 4-41: Protection for safety - Protection again
19、st electric shock HD 60364-4-41 + corr. July 2007 2007 IEC 60364-6 (mod) - 1) Low voltage electrical installations - Part 6: Verification HD 60364-6 2007 2) IEC 60439-1 - 1) Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies EN 60439-1 1999 2
20、) IEC 60529 - 1) Degrees of protection provided by enclosures (IP Code) EN 60529 + corr. May 1991 2) 1993 IEC 60664-1 2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests EN 60664-1 2007 IEC 60664-3 - 1) Insulation coordination for equipm
21、ent within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution EN 60664-3 2003 2) IEC 61140 - 1) Protection against electric shock - Common aspects for installation and equipment EN 61140 2002 2) ISO 669 - 1) Resistance welding - Resistance welding equi
22、pment - Mechanical and electrical requirements - - ISO 5828 - 1) Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics EN ISO 5828 2001 2) ISO 8205-1 - 1) Water-cooled secondary connection cables for resistance weldi
23、ng - Part 1: Dimensions and requirements for double-conductor connection cables EN ISO 8205-1 2002 2) 1) Undated reference. 2) Valid edition at date of issue. BS EN 62135-1:2008 Licensed CopyChinese University of Hong Kong, 11/04/2009 08:13, Uncontrolled Copy, (c) BSI EN 62135-1:2008 4 Publication Y
24、ear Title EN/HD Year ISO 8205-2 - 1) Water-cooled secondary connection cables for resistance welding - Part 2: Dimensions and requirements for single-conductor connection cables EN ISO 8205-2 2002 2) ISO 12100-1 - 1) Safety of machinery - Basic concepts, general principles for design - Part 1: Basic
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 62135 2008
链接地址:https://www.31doc.com/p-3745326.html