BS-EN-ISO-12947-2-1999.pdf
《BS-EN-ISO-12947-2-1999.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-12947-2-1999.pdf(20页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 12947-2:1999 Textiles Determination of the abrasion resistance of fabrics by the Martindale method Part 2: Determination of specimen breakdown The European Standard EN ISO 12947-2:1998 has the status of a British Standard ICS 59.080.30 BS EN ISO 12947-2:1999 This British S
2、tandard, having been prepared under the direction of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Committee and comes into effect on 15 April 1999 BSI 02-2000 ISBN 0 580 32246 7 National foreword This British Standard is the English language ve
3、rsion of EN ISO 12947-2:1998. It is identical with ISO 12947-2:1998. The four parts of BS EN ISO 12947 supersede BS 5690:1991 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee TCI/24, Physical testing of textiles, which has the responsibility to: aid en
4、quirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations
5、 represented on this committee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications. The Brit
6、ish Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not pur
7、port to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front
8、cover, pages i and ii, the EN ISO title page, page 2, the ISO title page, pages ii to iv, pages 1 to 8, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside fro
9、nt cover. Amendments issued since publication Amd. No.DateComments BS EN ISO 12947-2:1999 BSI 02-2000i Contents Page National forewordInside front cover Foreword2 Forewordiii Text of ISO 12947-21 ii blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 12947-2 December 1998 ICS 59.080.30 De
10、scriptors: See ISO document English version Textiles Determination of abrasion resistance of fabrics by the Martindale method Part 2: Determination of specimen breakdown (ISO 12947-2:1998) Textiles Dtermination de la rsistance labrasion des toffes par la mthode Martindale Partie 2: Dtermination de l
11、a dtrioration de lprouvette (ISO 12947-2:1998) Textilien Bestimmung der Scheuerbestndigkeit von textilen Flchengebilden Martindale-Verfahren Teil 2: Bestimmung der Probenzerstrung (ISO 12947-2:1998) This European Standard was approved by CEN on 15 December 1998. CEN members are bound to comply with
12、the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat
13、 or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official ve
14、rsions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Eu
15、ropen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1998 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12947-2:1998 E EN ISO 12947-2:1998 BSI 02-2000 2 Foreword The t
16、ext of the International Standard ISO 12947-1:1998 has been prepared by Technical Committee ISO/TC 38 “Textiles” in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is held by BSI. This European Standard shall be given the status of a nation
17、al standard, either by publication of an identical text or by endorsement, at the latest by June 1999, and conflicting national standards shall be withdrawn at the latest by June 1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries
18、are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the International Standard
19、 ISO 12947-2:1998 was approved by CEN as a European Standard without any modification. NOTENormative references to International Standards are listed in Annex ZA (normative). EN ISO 12947-2:1998 ii BSI 02-2000 Contents Page Forewordiii 1Scope1 2Normative references1 3Definitions1 4Principle1 5Appara
20、tus and materials2 6Conditioning and testing atmosphere2 7Sampling and preparation of test specimens2 8Abrasion test procedure3 9Results3 10Test report3 Annex A (normative) Specimen preparation for specified fabrics5 Annex B (informative) Precision of the test7 Annex ZA (normative) Normative referen
21、ces to international publications with their relevant European publicationsInside back cover Bibliography8 Figure A.1 Mounting device for easily stretched fabrics6 Table 1 Test intervals for abrasion testing3 Table B.1 Coefficient of variations (expressed as a percentage) based on one standard error
22、 estimates7 Table B.2 Coefficient of variations7 Table B.3 Standard errors calculated7 Table B.4 Standard errors of the means of four samples7 Descriptors: Textiles, fabrics, tests, abrasion tests, determination, abrasion resistance. EN ISO 12947-2:1998 BSI 02-2000iii Foreword ISO (the International
23、 Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been est
24、ablished has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardiz
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 12947 1999
链接地址:https://www.31doc.com/p-3745354.html