BS-EN-61010-2-032-2002.pdf
《BS-EN-61010-2-032-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-61010-2-032-2002.pdf(22页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61010-2-032: 2002 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement The European Standard EN 61010-2-032:2002 has
2、the status of a British Standard ICS 19.080 ? Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 07:43:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61010-2-032:2002 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee
3、, was published under the authority of the Standards Policy and Strategy Committee on 8 January 2003 BSI 8 January 2003 ISBN 0 580 41035 8 National foreword This British Standard is the official English language version of EN 61010-2-032:2002. It is identical with IEC 61010-2-032:2002. It supersedes
4、 BS EN 61010-2-032:1995 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee EPL/66, Safety of measuring, control and laboratory equipment, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to
5、 its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electro
6、nic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to und
7、erstand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document compri
8、ses a front cover, an inside front cover, the EN title page, pages 2 to 19 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09
9、 07:43:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARDEN 61010-2-032 NORME EUROPENNE EUROPISCHE NORMNovember 2002 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central S
10、ecretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61010-2-032:2002 E ICS 19.080Supersedes EN 61010-2-032:1995 English version Safety requirements for electrical equipment for mea
11、surement, control, and laboratory use Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement (IEC 61010-2-032:2002) Rgles de scurit pour appareils lectriques de mesurage, de rgulation et de laboratoire Partie 2-032: Prescriptions pa
12、rticulires pour les capteurs de courant portatifs ou pris en main de mesurage et dessais lectriques (CEI 61010-2-032:2002) Sicherheitsbestimmungen fr elektrische Mess-, Steuer-, Regel- und Laborgerte Teil 2-032: Besondere Anforderungen fr handgehaltene und handbediente Stromsonden fr elektrische Mes
13、sungen (IEC 61010-2-032:2002) This European Standard was approved by CENELEC on 2002-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-d
14、ate lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation unde
15、r the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, I
16、celand, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 07:43:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Foreword The text of document 66/298/FDIS, future edition 2 of
17、 IEC 61010-2-032, prepared by IEC TC 66, Safety of measuring, control, and laboratory equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61010-2-032 on 2002-11-01. This European Standard supersedes EN 61010-2-032:1995. The following dates were fixed: latest d
18、ate by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement(dop)2003-08-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow)2005-11-01 This Part 2-032 is to be used in conjunction with EN 6
19、1010-1:2001, Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements. Consideration may be given to future editions of, or amendments to, EN 61010-1. This Part 2-032 supplements or modifies the corresponding clauses of EN 61010-1 so as
20、to convert it into the European Standard: Safety requirements for hand-held and hand-manipulated current sensors for electrical test and measurement. Where a particular clause or subclause of Part 1 is not mentioned in this Part 2-032, that clause or subclause applies as far as is reasonable. Where
21、this Part 2-032 states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. In this standard: 1)the following print types are used: - requirements: in roman type; -NOTES: in smaller roman type; - conformity and test: in italic type; - terms used thro
22、ughout this standard which have been defined in clause 3: SMALL ROMAN CAPITALS. 2)subclauses, figures and tables which are additional to those in Part 1 are numbered starting from 101, additional list items are numbered from aa). Annexes designated “normative“ are part of the body of the standard. A
23、nnexes designated “informative“ are given for information only. In this standard, annexes D and ZA are normative and annex H is informative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61010-2-032:2002 was approved by CENELEC as a European Stan
24、dard without any modification. _ Page 2 EN 610102032:2002 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 07:43:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 160-01-2032 IEC:0202 3 CONTENTS 1 Scope nad boject . 4 2 Normative references. 4 3 Terms dna definitions . 5 4 Tesst . 7 5 Marking and
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 61010 032 2002
链接地址:https://www.31doc.com/p-3745440.html