BS-ISO-1206-2001.pdf
《BS-ISO-1206-2001.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-1206-2001.pdf(16页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 1206:2001 Rolling bearings Needle roller bearings, dimension series 48, 49 and 69 Boundary dimensions and tolerances ICS 21.100.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 06:31:41 GMT+00:00
2、2006, Uncontrolled Copy, (c) BSI BS ISO 1206:2001 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 16 April 2002 BSI 16 April 2002 ISBN 0 580 39
3、425 5 National foreword This British Standard reproduces verbatim ISO 1206:2001 and implements it as the UK national standard. It supersedes BS 5773-1:1983 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee MCE/7, Rolling bearings, which has the responsi
4、bility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entit
5、led “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Complian
6、ce with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related in
7、ternational and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 9 and a back cover. The BSI copyright date displayed in this document indicates when the
8、document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 06:31:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI INTERNATIONAL STANDARD ISO 1206 Third edition 2001-11-15 Reference number ISO 1206:2001(E) Rolling bearings N
9、eedle roller bearings, dimension series 48, 49 and 69 Boundary dimensions and tolerances Roulements Roulements aiguilles, sries de dimensions 48, 49 et 69 Dimensions dencombrement et tolrances Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 06:31:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
10、ISO 1206:2001(E) ii DPF discliamer This FDP feli amy ctnonia ededdebm tyfep.seca In aroccecnad tiwh Asebod gnisnecil ycilop, thsi feli may be pritnde ro eivwde but sllah ton eb tideed sselnu teh tyfepseca hwich are mededdeb era licdesne to dna tsniladel on teh moctupre epfrromign the ideti.gn In odg
11、nidaolnw this file, raptise ccatpe trehien teh serilibisnopty fo ton fnirignign sebodA gnisnecil ilopcy. The ISO tneCral Sceterarita catpecs no libaility in this aera. ebodA si a trmedarak of Adebo Stsysme Irocntarop.de teDails of teh fostware prtcudos desu to crtaee tsih PFD feli nac be fdnuo ni th
12、e Glarene Info talerive to the f;eli teh PDF-taercnoi rapmateers weer tpodezimi for pritn.gni vErey cera sah eebn tkane to rusnee ttah the feli is tiusbael for ues by ISO mrebme seidob. In teh kilnuley evtne ttah a pborlme talerign to ti si f,dnuo saelpe ifnrom teh tneClar Stercearita ta the serddas
13、 givne olebw. ISO 1002 llA rithgs rresev.de Unless torehiwse sficep,dei on rapt of tihs buptacilion may be rperdecudo ro tuilidez in any form ro by nay m,snae ele-c trinoc or m,lacinahce gnidulcni tohppocoyign dna cimrfo,mli tiwtuoh repminoiss ni rwitgni fmor eitreh ISO at teh serddas olebw ro ISOs
14、mme- reb ydob in the cuotnry fo the rtseuqeer. ISO cporythgi fofiec esaC tsopael 65 1121-HC Geneva 02 Te.l + 41 22 947 10 11 Fax + 14 22 479 09 47 E-liam copyrightsio.ch Web wwwsi.oc.h Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 06:31:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 1206
15、:2001(E) iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject
16、for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) o
17、n all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Internation
18、al Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Int
19、ernational Standard ISO 1206 was prepared by Technical Committee ISO/TC 4,Rolling bearings, Subcommittee SC 5,Needle roller bearings. This third edition cancels and replaces the second edition (ISO 1206:1982), which has been technically revised. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26
20、 06:31:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 06:31:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI INTERNATIONAL STANDARDISO 1206:2001(E) ISO 1002 All rithgs rreseved 1 Rolling bearings Needle roller bearings, dimension series 48, 49 and 6
21、9 Boundary dimensions and tolerances 1Scope This International Standard specifies the boundary dimensions and normal class tolerances for needle roller bearings of dimension series 48, 49 and 69 as given in ISO 15. These series apply to complete needle roller bearings and to bearings without inner r
22、ing. This International Standard does not apply to drawn cup needle roller bearings. 2Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to,
23、 or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of t
24、he normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 582:1995,Rolling bearings Chamfer dimensions Maximum values ISO 1132-1:2000,Rolling bearings Tolerances Part 1: Terms and definitions ISO 5593:1997,Rolling bearings Vo
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 1206 2001
链接地址:https://www.31doc.com/p-3745453.html