BS-ISO-13775-2-2000.pdf
《BS-ISO-13775-2-2000.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-13775-2-2000.pdf(22页珍藏版)》请在三一文库上搜索。
1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS ISO 13775-2:2000 ICS 2
2、3.040.70; 43.060.40 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Thermoplastic tubing and hoses for automotive use Part 2: Petroleum-based fuel applications Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 06:53:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI This Briti
3、sh Standard, having been prepared under the direction of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Committee and comes into effect on 15 April 2000 BSI 04-2000 ISBN 0 580 34264 6 BS ISO 13775-2:2000 Amendments issued since publication Amd. N
4、o.DateComments National foreword This British Standard reproduces verbatim ISO 13775-2:2000 and implements it as the UK national standard. The UK participation in its preparation was entrusted by Technical Committee PRI/66, Rubber and plastics tubing, hoses and hose assemblies, to Subcommittee PRI/6
5、6/2, Automotive applications,which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European
6、 developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Standards Catalogu
7、e under the section entitled International Standards Correspondence Index, or by using the Find facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct
8、application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to v, a blank page, pages 1 to 13, and a back cover. The BSI copyright notice display
9、ed in this document indicates when the document was last issued. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 06:53:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Reference number ISO 13775-2:2000(E) INTERNATIONAL STANDARD ISO 13775-2 First edition 2000-02-01 Thermoplastic tubing and hoses
10、for automotive use Part 2: Petroleum-based-fuel applications Tubes et tuyaux en thermoplastique pour lindustrie automobile Partie 2: Applications pour carburants base de ptrole Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 06:53:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 13775-2:2000
11、(E) ii? Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 06:53:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 13775-2:2000(E) ?iii Contents?Page Foreword.iv Introduction.v 1?Scope 1 2?Normative references1 3?Classification and materials.2 4?Dimensions.2 5?Requirements for approval of produc
12、ts3 6?Marking.5 Annex A (informative) Example of how a non-standard type of tubing or hose could be specified using a matrix.6 Annex B (normative) Method for determining the resistance to surface-contaminating fluids .7 Annex C (normative) Method of test for flame resistance8 Licensed Copy: sheffiel
13、dun sheffieldun, na, Sun Nov 26 06:53:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 13775-2:2000(E) iv? Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is n
14、ormally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part i
15、n the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the tec
16、hnical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this part of ISO 13775 may be the subject of patent ri
17、ghts. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 13775-2 was prepared by Technical Committee ISO/TC 45,Rubber and rubber products, Subcommittee SC 1,Hoses (rubber and plastics). ISO 13775 consists of the following parts, under the gene
18、ral titleThermoplastic tubing and hoses for automotive use: Part 1: Non-fuel applications Part 2: Petroleum-based-fuel applications Annexes A, B and C of this part of ISO 13775 are for information only. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 06:53:18 GMT+00:00 2006, Uncontrolled Copy
19、, (c) BSI ISO 13775-2:2000(E) ?v Introduction This specification defines the requirements of extruded thermoplastic tubing/hoses for petroleum-based-fuel applications for automotive use. In addition, it may also be applied as a classification system to enable original equipment manufacturers (OEMs)
20、to detail a “line call-out” of tests for specific applications where these are not covered by the six main types (see example in annex A). In this case, the tubing or hose would not carry any marking showing this ISO specification number, but may detail the OEMs own identification markings as shown
21、on their part drawings. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 06:53:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 06:53:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI INTERNATIONAL STANDARD?ISO 13775-2:2000(E) ?1 Thermoplastic tu
22、bing and hoses for automotive use Part 2: Petroleum-based-fuel applications WARNING Persons using this part of ISO 13775 should be familiar with normal laboratory practice. This part of ISO 13775 does not purport to address all of the safety problems, if any, associated with its use. It is the respo
23、nsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions. 1?Scope This part of ISO 13775 specifies test requirements and test methods for extruded thermoplastic tubing and hoses for use in petroleum-based-fuel lines i
24、n vehicles powered by internal-combustion engines. This specification is intended especially for use by original equipment manufacturers (OEMs). 2?Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of IS
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 13775 2000
链接地址:https://www.31doc.com/p-3745466.html