BS-ISO-11600-1993.pdf
《BS-ISO-11600-1993.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-11600-1993.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 11600:1993 Implementation of ISO 11600:1993 Building construction Sealants Classification and requirements Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 08:35:57 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 11600:1993 This British Standard, having been prepared
2、under the direction of the Sector Board for Building and Civil Engineering, was published under the authority of the Standards Board and comes into effect on 15 April 1995 BSI 08-1999 The following BSI references relate to the work on this standard: Committee reference B/547 Draft for comment 92/106
3、18 DC ISBN 0 580 24104 1 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee B/547, Sealants for building and construction, upon which the following bodies were represented: Aluminium Window Association Association of Sealant
4、 Applicators British Adhesives and Sealants Association Building Employers Confederation Department of the Environment (Building Research Establishment) Flat Glass Manufacturers Association Glass and Glazing Federation Local Authority Organizations Society of Chemical Industry Water Services Associa
5、tion of England and Wales Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 08:35:57 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 11600:1993 BSI 08-1999i Contents Page Committees responsibleInside front cover National forewordii Fore
6、wordiii Text of ISO 116001 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 08:35:57 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 11600:1993 ii BSI 08-1999 National foreword This British Standard reproduces verbatim ISO 11600:1993 and implements it as the UK national standard. This Britis
7、h Standard is published under the direction of the Sector Board for Building and Civil Engineering whose Technical Committee B/547 has the responsibility to: aid enquirers to understand the text; present to the responsible international committee any enquiries on interpretation, or proposals for cha
8、nge, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, BSI, 389 Chiswick High Road, London W4 4AL. A British Standard do
9、es not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an ins
10、ide front cover, pages i and ii, the ISO title page, pages ii to iv, pages 1 to 5 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffi
11、eldun, na, Mon Nov 27 08:35:57 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 08:35:57 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 11600:1993(E) ii BSI 08-1999 Contents Page Forewordiii 1Scope1 2Normative references1 3Definitions1 4Classification
12、1 5Designation2 6Requirements and test methods2 7Specified test conditions2 8Marking5 Figure 1 Diagram of classification of sealants in building construction2 Table 1 Sealant classes1 Table 2 Requirements for glazing sealants (G)3 Table 3 Requirements for construction sealants (F)4 Licensed Copy: sh
13、effieldun sheffieldun, na, Mon Nov 27 08:35:57 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 11600:1993(E) BSI 08-1999iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International
14、 Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, a
15、lso take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Interna
16、tional Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 11600 was prepared by Technical Committee ISO/TC 59, Building construction, Sub-Committee SC 8, Jointing products. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 08:35:57 GMT+00
17、:00 2006, Uncontrolled Copy, (c) BSI iv blank Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 08:35:57 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 11600:1993(E) BSI 08-19991 1 Scope This International Standard specifies the types and classes of sealant used in building construction accordi
18、ng to their applications and performance characteristics. Furthermore, the requirements and respective test methods for the different classes are stipulated. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this Interna
19、tional Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. M
20、embers of IEC and ISO maintain registers of currently valid International Standards. ISO 6927:1981, Building construction Jointing products Sealants Vocabulary. ISO 7389:1987, Building construction Jointing products Determination of elastic recovery. ISO 7390:1987, Building construction Jointing pro
21、ducts Determination of resistance to flow. ISO 8339:1984, Building construction Jointing products Sealants Determination of tensile properties. ISO 8340:1984, Building construction Jointing products Sealants Determination of tensile properties at maintained extension. ISO 9046:1987, Building constru
22、ction Sealants Determination of adhesion/cohesion properties at constant temperature. ISO 9047:1989, Building construction Sealants Determination of adhesion/cohesion properties at variable temperatures. ISO 10563:1991, Building construction Sealants for joints Determination of change in mass and vo
23、lume. ISO 10590:1991, Building construction Sealants Determination of adhesion/cohesion properties at maintained extension after immersion in water. ISO 10591:1991, Building construction Sealants Determination of adhesion/cohesion properties after immersion in water. ISO 11431:1993, Building constru
24、ction Sealants Determination of adhesion/cohesion properties after exposure to artificial light through glass. ISO 11432:1993, Building construction Sealants Determination of resistance to compression. 3 Definitions For the purposes of this International Standard, the definitions given in ISO 6927 a
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 11600 1993
链接地址:https://www.31doc.com/p-3745502.html