BS-ISO-11783-1-2007.pdf
《BS-ISO-11783-1-2007.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-11783-1-2007.pdf(104页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 11783-1:2007 Tractors and machinery for agriculture and forestry Serial control and communications data network Part 1: General standard for mobile data communication ICS 35.240.99; 65.060.01 ? Licensed Copy: London South Bank University, London South Bank University, Mon Jul
2、 16 04:17:08 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS ISO 11783-1:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2007 BSI 2007 ISBN 978 0 580 55628 9 National foreword This British Standard is the UK implementation of ISO 1
3、1783-1:2007. The UK participation in its preparation was entrusted by Technical Committee AGE/6, Agricultural tractors and forestry machinery, to Subcommittee AGE/6/1, Agricultural electronics. A list of organizations represented on this committee can be obtained on request to its secretary. This pu
4、blication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South
5、 Bank University, London South Bank University, Mon Jul 16 04:17:08 GMT+00:00 2007, Uncontrolled Copy, (c) BSI Reference number ISO 11783-1:2007(E) INTERNATIONAL STANDARD ISO 11783-1 First edition 2007-06-15 Tractors and machinery for agriculture and forestry Serial control and communications data n
6、etwork Part 1: General standard for mobile data communication Tracteurs et matriels agricoles et forestiers Rseaux de commande et de communication de donnes en srie Partie 1: Systme normalis gnral pour les communications de donnes avec les quipements mobiles BS ISO 11783-1:2007 Licensed Copy: London
7、 South Bank University, London South Bank University, Mon Jul 16 04:17:08 GMT+00:00 2007, Uncontrolled Copy, (c) BSI ii Licensed Copy: London South Bank University, London South Bank University, Mon Jul 16 04:17:08 GMT+00:00 2007, Uncontrolled Copy, (c) BSI iii Contents Page Foreword iv Introduction
8、 v 1 Scope . 1 2 Normative references. 1 3 Terms and definitions. 1 4 Abbreviated terms 9 5 Application of OSI model to ISO 11783 10 6 ISO 11783 network requirements 11 6.1 General. 11 6.2 Physical layer 11 6.3 Data link layer 11 6.4 Network layer 13 6.5 Network management. 13 6.6 Network segments 1
9、3 6.7 Virtual terminal 15 6.8 Tractor ECU. 15 6.9 Task controllers 15 6.10 Farm management computer interface 15 6.11 Diagnostics 16 6.12 File server 16 6.13 Process data 16 6.14 Working sets . 16 6.15 Safe mode operation 18 6.16 Addition of parameters and messages. 18 Annex A (normative) Parameter
10、group assignments. 19 Annex B (normative) ISO 11783 Industry groups . 53 Annex C (normative) ISO 11783 Industry group 0 preferred addresses 54 Annex D (normative) ISO 11783 Industry group 2 initial addresses. 59 Annex E (normative) ISO 11783 NAMEs 60 Annex F (normative) ISO 11783 All industry NAMEs
11、75 Annex G (normative) ISO 11783 manufacturer codes 81 Annex H (informative) ISO 11783 Request forms 88 Bibliography. 94 BS ISO 11783-1:2007 Licensed Copy: London South Bank University, London South Bank University, Mon Jul 16 04:17:08 GMT+00:00 2007, Uncontrolled Copy, (c) BSI iv Foreword ISO (the
12、International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee
13、 has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnic
14、al standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bo
15、dies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. ISO 11783-1 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 19, Agricultural electronics. ISO 11783 co
16、nsists of the following parts, under the general title Tractors and machinery for agriculture and forestry Serial control and communications data network: Part 1: General standard for mobile data communication Part 2: Physical layer Part 3: Data link layer Part 4: Network layer Part 5: Network manag
17、ement Part 6: Virtual terminal Part 7: Implement messages application layer Part 8: Power train messages Part 9: Tractor ECU Part 10: Task controller and management information system data interchange Part 11: Mobile data element dictionary Part 12: Diagnostics services Part 13: File server Automate
18、d functions is to form the subject of a future part 14. BS ISO 11783-1:2007 Licensed Copy: London South Bank University, London South Bank University, Mon Jul 16 04:17:08 GMT+00:00 2007, Uncontrolled Copy, (c) BSI v Introduction ISO 11783 specifies a communications system for agricultural equipment
19、based on the CAN 2.0 B 1 protocol. SAE J 1939 documents1), on which parts of ISO 11783 are based, were developed jointly for use in truck and bus applications and for construction and agriculture applications. Joint documents were completed to allow electronic units that meet the truck and bus SAE J
20、 1939 specifications to be used by agricultural and forestry equipment with minimal changes. General information on ISO 11783 is to be found in this part of ISO 11783. The purpose of ISO 11783 is to provide an open, interconnected system for on-board electronic systems. It is intended to enable elec
21、tronic control units (ECUs) to communicate with each other, providing a standardized system. The International Organization for Standardization (ISO) draws attention to the fact that it is claimed that compliance with this part of ISO 11783 may involve the use of a patent concerning the controller a
22、rea network (CAN) protocol referred to throughout the document. ISO takes no position concerning the evidence, validity and scope of this patent. The holder of this patent has assured ISO that he is willing to negotiate licences under reasonable and non- discriminatory terms and conditions with appl
23、icants throughout the world. In this respect, the statement of the holder of this patent right is registered with ISO. Information may be obtained from: Robert Bosch GmbH Wernerstrasse 51 Postfach 30 02 20 D-70442 Stuttgart-Feuerbach Germany Attention is drawn to the possibility that some of the ele
24、ments of this part of ISO 11783 may be the subject of patent rights other than those identified above. ISO shall not be held responsible for identifying any or all such patent rights. 1) Society of Automotive Engineers, Warrendale, PA, USA. BS ISO 11783-1:2007 Licensed Copy: London South Bank Univer
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 11783 2007
链接地址:https://www.31doc.com/p-3745503.html