BS-ISO-22915-10-2008.pdf
《BS-ISO-22915-10-2008.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-22915-10-2008.pdf(14页珍藏版)》请在三一文库上搜索。
1、BS ISO 22915-10:2008 ICS 53.060 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Industrial trucks Verification of stability Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered de
2、vices Licensed CopyChinese University of Hong Kong, 13/06/2009 08:25, Uncontrolled Copy, (c) BSI This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2009 BSI 2009 ISBN 978 0 580 55395 0 Amendments/corrigenda issued since publication Date
3、Comments BS ISO 22915-10:2008 National foreword This British Standard is the UK implementation of ISO 22915-10:2008. It supersedes BS ISO 10658:1996 and which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee MHE/7, Industrial trucks. A list of organizations
4、represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Lic
5、ensed CopyChinese University of Hong Kong, 13/06/2009 08:25, Uncontrolled Copy, (c) BSI BS ISO 22915-10:2008 Reference number ISO 22915-10:2008(E) ISO 2008 INTERNATIONAL STANDARD ISO 22915-10 First edition 2008-06-15 Industrial trucks Verification of stability Part 10: Additional stability test for
6、trucks operating in the special condition of stacking with load laterally displaced by powered devices Chariots de manutention Vrification de la stabilit Partie 10: Essai de stabilit supplmentaire pour les chariots travaillant dans des conditions de gerbage spciales avec la charge dcentre latralemen
7、t par des dispositifs moteur Licensed CopyChinese University of Hong Kong, 13/06/2009 08:25, Uncontrolled Copy, (c) BSI BS ISO 22915-10:2008 ISO 22915-10:2008(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewe
8、d but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in t
9、his area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable fo
10、r use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2008 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized
11、 in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41
12、 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2008 All rights reserved Licensed CopyChinese University of Hong Kong, 13/06/2009 08:25, Uncontrolled Copy, (c) BSI BS ISO 22915-10:2008 ISO 22915-10:2008(E) ISO 2008 All rights reserved iii Foreword ISO (the Inter
13、national Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has
14、been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical st
15、andardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies
16、for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or
17、all such patent rights. ISO 22915-10 was prepared by Technical Committee ISO/TC 110, Industrial trucks, Subcommittee SC 2, Safety of powered industrial trucks. This first edition of ISO 22915-10 cancels and replaces ISO 10658:1996, of which it constitutes a technical revision. ISO 22915 consists of
18、the following parts, under the general title Industrial trucks Verification of stability: Part 1: General Part 2: Counterbalanced trucks with mast Part 3: Reach and straddle trucks Part 4: Pallet stackers, double stackers and order-picking trucks up to and including 1 200 mm lift height Part 7: Bidi
19、rectional and multidirectional trucks Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by p
20、owered devices Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization Part 21: Order-picking trucks with operator position elevating above 1 200 mm The following parts are under preparation: Part 5: Single side loading trucks Part 9: Co
21、unterbalanced trucks with mast handling freight containers of 6 m (20 ft) length and longer Part 11: Variable reach trucks Licensed CopyChinese University of Hong Kong, 13/06/2009 08:25, Uncontrolled Copy, (c) BSI BS ISO 22915-10:2008 ISO 22915-10:2008(E) iv ISO 2008 All rights reserved Part 12: Var
22、iable reach trucks handling freight containers of 6 m (20 ft) length and longer Part 14: Rough-terrain variable reach trucks Part 15: Counterbalanced trucks with articulated steering Part 16: Pedestrian-propelled trucks Part 17: Burden and personnel carriers Licensed CopyChinese University of Hong K
23、ong, 13/06/2009 08:25, Uncontrolled Copy, (c) BSI BS ISO 22915-10:2008 ISO 22915-10:2008(E) ISO 2008 All rights reserved v Introduction An important step forward in work on the ISO 22915 series was the agreement to put in place a new structure. The stability tests are presented in the form of a basi
24、c part describing and defining stability tests in general, together with separate parts that each give specific stability test criteria and requirements for a different truck type. From the very beginning, the task of the Working Group involved was to establish the new structure and revise existing
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 22915 10 2008
链接地址:https://www.31doc.com/p-3745552.html