《BS-ISO-16016-2000.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-16016-2000.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 16016:2000 Technical product documentation Protection notices for restricting the use of documents and products ICS 01.110 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 12:58:35 GMT+00:00 2006, Un
2、controlled Copy, (c) BSI BS ISO 16016:2000 This British Standard, having been prepared under the direction of the Consumer Products and Services Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 September 2001 BSI 07-2001 ISBN 0 580 38243 5 Na
3、tional foreword This British Standard reproduces verbatim ISO 16016:2000 and implements it as the UK national standard. The UK participation in its preparation was entrusted by Technical Committee TDW/4, Engineering drawing, Metrology, Precision measurement and all related documentation, to Subcommi
4、ttee TDW/4/-/1, General drawing principles, conventions and related documentation, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publ
5、ications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary pro
6、visions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiri
7、es on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page pages ii to iv, pages 1 to 6
8、, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 12:58:35 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
9、 Reference number ISO 16016:2000(E) INTERNATIONAL STANDARD ISO 16016 First edition 2000-09-15 Technical product documentation Protection notices for restricting the use of documents and products Documentation technique de produits Symboles et clauses de protection utiliss pour les documents et produ
10、its dont lusage est rserv Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 12:58:35 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 12:58:35 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 16016:2000(E) iii Foreword ISO (the International Org
11、anization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been establi
12、shed has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardizatio
13、n. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % o
14、f the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 16016 was prepared by Te
15、chnical Committee ISO/TC 10, Technical drawings, product definition and related documentation, Subcommittee SC 1, Basic conventions. Annex A of this International Standard is for information only. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 12:58:35 GMT+00:00 2006, Uncontrolled Copy, (c)
16、BSI ISO 16016:2000(E) iv Introduction The existence of document and product protection, as well as its extent, is primarily oriented towards fulfilling the requirements of industrial property rights and copyright law. In order to draw the attention of users to this legally provided protection, addit
17、ional safeguards are recommended through the use of protection notices that forestall the improper use of documents and products. Normally, full protection is afforded only by appropriate contractual agreements between the involved parties. The protection notices specified in this International Stan
18、dard serve to warn and explain. They are designed to facilitate the furnishing of proof and offer additional safeguards to authors and holders of commercial protection rights. If any national laws require additional or other requirements for national trade, for example the use of national language,
19、those requirements are to be respected. The WIPO standards cited can be obtained from: World Intellectical Property Organization 34 chemin des Colombettes CH-1211 Geneva 20 http:/www.wipo.int Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 12:58:35 GMT+00:00 2006, Uncontrolled Copy, (c) BSI I
20、NTERNATIONAL STANDARDISO 16016:2000(E) 1 Technical product documentation Protection notices for restricting the use of documents and products 1Scope This International Standard specifies the protection notices which serve to prevent the improper use of documents and products whose usage is restricte
21、d. With the benefit of a uniform text, protection notices draw attention to the existence of an industrial property right or copyright. Furthermore, they clearly show that the owner of the right claims legal protection to the fullest extent and, in addition to this, they restrict the utilization of
22、the documents or products concerned. 2Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do n
23、ot apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Membe
24、rs of ISO and IEC maintain registers of currently valid International Standards. WIPO Standard ST.3, Two-letter codes for the representation of states, other entities and organizations. WIPO Standard ST.16, Standard code for the identification of different kinds of patent documents. 3Terms and defin
25、itions For the purposes of this International Standard, the following terms and definitions apply. 3.1 document any medium with information recorded on or in it. ISO/IEC Guide 2:1996, definition 3.1, note 21 NOTEThis definition covers paper documents, electronic data, software programmes, graphics,
26、videos and recorded sounds. 3.2 product a thing or substance produced by a natural or artificial process ISO 10303-1:19942 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 12:58:35 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 16016:2000(E) 2 4Indication of protection rights 4.1General It is
27、recommended that holders or licensees of protection rights who wish to draw attention to these rights and avoid their infringement use the markings specified in 4.2 to 4.4. 4.2Copyright The existence of a copyright is indicated by ?either the character C in a circle: ?Name of owner of original or tr
28、ansferred rights, followed by the year of the first publication of the document NOTEThis notice corresponds to article III, paragraph 1 of the Universal Copyright Convention, which also provides that the mentioned data be designated in a manner that expresses the reservation of copyright with suffic
29、ient clarity. ?or by the designation: “Copyright reserved” 4.3Patents and Utility Models The existence of a patent notice is indicated by the character P in a circle, and that of a utility model notice by the character U in a circle, followed by these three data elements: ?the country code according
30、 to WIPO Standard ST.3 (corresponding to ISO 3166-13supplemented by the code for international organizations concerned with commercial protection laws); ?the publication or registration number; ?letter code according to WIPO-Standard ST.16. EXAMPLE 1 ? PFR 2 775 254 A1 EXAMPLE 2 ? UUS 5,927,354 B 4.
31、4Designs (Industrial Designs) Designs may be designated by the term “registered design” or “design patent”. The existence of a design is indicated by the character D in a circle, followed by these two data elements: ?the country code (see 4.3); ?the registration or publication number of the design.
32、EXAMPLE ? DDE 496 00 0001 4.5Use The above-mentioned notices may be used when citing protected documents or products in other publications such as catalogues, offers or brochures. If it is not possible to use the circled character, for example because it is not within the character set of the text-p
33、rocessing system being used, the complete term shall be typed for example, Utility Model CH 679439 B5. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 12:58:35 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 16016:2000(E) 3 The copyright notice refers to the prohibition of physical reproductio
34、n, while notices for patents, utility models and designs refer to the prohibition of the use for commercial purposes of the technical principle on which the related object (or process) is based, and forbid reproduction or copying for commercial use. These protection notices do not affect the communi
35、cation of information on the documents or products in question. 5Wording of mention protecting the documents 5.1Complete version For additional protection of the content or information, it is recommended that the following wording be employed: “The reproduction, distribution and utilization of this
36、document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design.” The explicit term for the document concerned (fo
37、r example, technical drawing, instruction etc.) may be used in stead of the word “document” where this is judged to be preferable. The restriction of the use of a document may be suspended by means of the written consent of the holder of the protection rights. It is recommended that the documents de
38、stined for cession to other language partners be provided with one of the language versions of the protection notice presented in Annex A. 5.2Abridged version Where use of the complete version is not expedient the following abridged version may be used: “Refer to protection notice ISO 16016” However
39、, this version should be avoided wherever possible. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 12:58:35 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 16016:2000(E) 4 Annex A (informative) Translations of the protection notice given in 5.1 Table A.1 Language code (language name) in confo
40、rmance with ISO 6394 Text cs (Czech) Reprodukovn, en a poskytnut tohoto dokumentu, jeho st nebo jeho obsahu tet osob je bez vslovnho souhlasu zakzno. Poruen zkazu vede k odpovdnosti za vzniklou kodu. Vsechna prva jsou vyhrazena rovn v ppadech registrovanho patentu, prmyslovho vzoru nebo vtvarnho nvr
41、hu. da (Danish) Dette dokument m ikke videregives til andre eller mangfoldiggres, og dets indhold m ikke udnyttes eller offentliggres, uden vores udtrykkelige tilladelse. Overtrdelser af dette vil medfre krav om skadeserstatning.Allerettighederforbeholdes,srlingrettentilgennemfrelseafpatent-, brugsm
42、odel- eller mnsterbeskyttelse. de (German) Weitergabe sowie Vervielfltigung dieses Dokuments, Verwertung und Mitteilung seines Inhalts verboten, soweit nicht ausdrcklich gestattet. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte fr den Fall der Patent-, Gebrauchsmuster- oder Geschmacksm
43、ustereintragung vorbehalten. es (Spanish) Sin nuestra expresa autorizacin, queda terminantemente prohibida la reproduccin total o parcial de este documento, as como su uso indebido y/o su exhibicin o comunicacin a terceros. De los infractores se exigir el correspondiente resarcimiento de daos y perj
44、uicios. Quedan reservados todos los derechos inherentes, en especial los de patentes, de modelos registrados y estticos. fr (French) Toute communication ou reproduction de ce document, sous quelque forme que ce soit, et toute exploitation ou communication de son contenu sont interdites, sauf autoris
45、ation crite expresse. Tout manquement cette rgle est illicite et expose son auteur au versement de dommages et intrts. Tous droits rservs pour le cas de la dlivrance dun brevet, dun modle dutilit ou dun modle de prsentation. it (Italian) vietato consegnare a terzi o riprodurre questo documento, util
46、izzarne il contenuto o renderlo comunque noto a terzi senza esplicita autorizzazione. Ogni infrazione comporta il risarcimento dei danni subiti. Sono riservati tutti i diritti derivanti dalla concessione di brevetti per invenzioni industriali di utilit o di brevetti per modelli ornamentali. ja (Japa
47、nese) nl (Dutch) Zonder uitdrukkelijke voorafgaande toestemming is het verboden dit document dan wel de hierin vervatte informatie te gebruiken voor andere doeleinden dan waarvoor de informatie is vrijgegeven, dan wel te vermenigvuldigen, verspreiden of op enige andere wijze aan derden bekend te mak
48、en. Overtreders zijn verplicht de hieruit voortvloeiende schadetevergoeden.Allerechtenzijn voorbehouden, in het bijzonder het recht om octrooien, gebruiksmodellen en siermodellen aan te vragen. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 12:58:35 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
49、 ISO 16016:2000(E) 5 Table A.1 (continued) Language code (language name) in conformance with ISO 639 Text no (Norwegian) Kopiering, distribusjon og utnyttelse av dette dokumentet svel som offentliggjring av dets innhold uten vr uttrykklige tillatelse er ikke tillatt. Overtredelse vil medfre krav om skadeserstatning. Alle rettigheterforbeholdes,srligrettentilgjennemfrelseavpatent-,bruksmodel-eller mnsterbeskyttelse. pl (Polish) Reprodukcja,rozpowszechnianieiwykorzystywanieniniejszegodok
链接地址:https://www.31doc.com/p-3745567.html