BS-ISO-16653-1-2008.pdf
《BS-ISO-16653-1-2008.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-16653-1-2008.pdf(12页珍藏版)》请在三一文库上搜索。
1、BS ISO 16653-1:2008 ICS 53.020.99 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Mobile elevating work platforms Design, calculations, safety requirements and test methods relative to special features Part 1: MEWPs with retractable guardrail systems Licensed
2、CopyChinese University of Hong Kong, 21/10/2008 02:58, Uncontrolled Copy, (c) BSI This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2008 BSI 2008 ISBN 978 0 580 54468 2 Amendments/corrigenda issued since publication DateComments BS IS
3、O 16653-1:2008 National foreword This British Standard is the UK implementation of ISO 16653-1:2008. The UK participation in its preparation was entrusted to Technical Committee MHE/12, Lifting platforms. A list of organizations represented on this committee can be obtained on request to its secreta
4、ry. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Licensed CopyChinese University of Hong Kong, 21/10/2008 02:58, Uncontroll
5、ed Copy, (c) BSI BS ISO 16653-1:2008 Reference number ISO 16653-1:2008(E) ISO 2008 INTERNATIONAL STANDARD ISO 16653-1 First edition 2008-06-01 Mobile elevating work platforms Design, calculations, safety requirements and test methods relative to special features Part 1: MEWPs with retractable guardr
6、ail systems Plates-formes lvatrices mobiles de personnel Conception, calculs, exigences de scurit et mthodes dessai concernant les caractristiques spciales Partie 1: PEMP avec systme de garde-corps rtractable Licensed CopyChinese University of Hong Kong, 21/10/2008 02:58, Uncontrolled Copy, (c) BSI
7、BS ISO 16653-1:2008 ISO 16653-1:2008(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing
8、 the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF fil
9、e can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secret
10、ariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2008 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writin
11、g from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2008 All rights reserved Licensed Co
12、pyChinese University of Hong Kong, 21/10/2008 02:58, Uncontrolled Copy, (c) BSI BS ISO 16653-1:2008 ISO 16653-1:2008(E) ISO 2008 All rights reserved iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The w
13、ork of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-govern
14、mental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The
15、 main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
16、 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 16653-1 was prepared by Technical Committee ISO/TC 214, Elevating work platforms. ISO 16653 cons
17、ists of the following parts, under the general title Mobile elevating work platforms Design, calculations, safety requirements and test methods relative to special features: Part 1: MEWPs with retractable guardrail systems Part 2: MEWPs with non-conductive (insulating) components MEWPs for orchard o
18、perations are to form the subject of a future part 3. Licensed CopyChinese University of Hong Kong, 21/10/2008 02:58, Uncontrolled Copy, (c) BSI BS ISO 16653-1:2008 ISO 16653-1:2008(E) iv ISO 2008 All rights reserved Introduction The object of ISO 16653 is to define rules for safeguarding persons an
19、d objects against the risk of accident associated with the operation of special-application mobile elevating work platforms (MEWPs). The requirements of ISO 16653 are intended to supplement or modify those of ISO 16368 (see Clause 2). Unless specified otherwise within this part of ISO 16653, all the
20、 relevant provisions of ISO 16368 are applicable in addition to the provisions of this part of ISO 16653. ISO 16653 does not repeat all the general technical rules applicable to every electrical, mechanical or structural component. The safety requirements of this part of ISO 16653 have been drawn up
21、 on the basis that MEWPs are periodically maintained according to manufacturers instructions, working conditions, frequency of use and applicable regulations. It is assumed that MEWPs will be checked for function daily before start of work and that they will not be put into operation unless all requ
22、ired control and safety devices are available and in working order. If a MEWP is seldom used, the checks may be made before start of work. Where, for clarity, an example of a safety measure is given in the text, this is not intended as the only possible solution. Any other solution leading to an equ
23、ivalent level of safety is permissible. Licensed CopyChinese University of Hong Kong, 21/10/2008 02:58, Uncontrolled Copy, (c) BSI BS ISO 16653-1:2008 INTERNATIONAL STANDARD ISO 16653-1:2008(E) ISO 2008 All rights reserved 1 Mobile elevating work platforms Design, calculations, safety requirements a
24、nd test methods relative to special features Part 1: MEWPs with retractable guardrail systems 1 Scope This part of ISO 16653 specifies the safety requirements for mobile elevating work platforms (MEWPs) with guardrail systems. It is intended to be used in conjunction with ISO 16368. It is applicable
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 16653 2008
链接地址:https://www.31doc.com/p-3745584.html