BS-ISO-18185-3-2006.pdf
《BS-ISO-18185-3-2006.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-18185-3-2006.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 18185-3:2006 Freight containers Electronic seals Part 3: Environmental characteristics ICS 55.180.10 ? Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 01:46:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 18185-3:2006 This British Standard was published under the
2、authority of the Standards Policy and Strategy Committee on 30 June 2006 BSI 2006 ISBN 0 580 48818 7 National foreword This British Standard reproduces verbatim ISO 18185-3:2006 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committe
3、e TW/1, Freight containers and swap bodies, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found
4、in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are respons
5、ible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK
6、interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to v, a blank page, pages 1 to 5 and a back cover. The BSI copyright notice displayed
7、 in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 01:46:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI INTERNATIONAL STANDARD ISO 18185-3 First edition 2006-06-01 Reference nu
8、mber ISO 18185-3:2006(E) Freight containers Electronic seals Part 3: Environmental characteristics Conteneurs pour le transport de marchandises Scells lectroniques Partie 3: Caractristiques environnementales BS ISO 18185-3:2006 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 01:46:14 GMT+00:0
9、0 2006, Uncontrolled Copy, (c) BSI ii Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 01:46:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iii Contents Page 1Scope 1 2Normative references 1 3Terms and definitions 2 4Environmental characteristics 2 4.1General . 2 4.2Low temperature . 3 4.3High
10、temperature . 3 4.4Mechanical shock 3 4.5Random vibration 3 4.6Humidity . 3 4.7Rain/snow 3 4.8Salt fog . 3 4.9Drop shock . 4 4.10Sand and dust 4 4.11Electromagnetic environment 4 Bibliography . 5 BS ISO 18185-3:2006 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 01:46:14 GMT+00:00 2006, Unco
11、ntrolled Copy, (c) BSI iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested
12、in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commi
13、ssion (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technica
14、l committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shal
15、l not be held responsible for identifying any or all such patent rights. ISO 18185-3 was prepared by Technical Committee ISO/TC 104, Freight containers, Subcommittee SC 4, Identification and communication. ISO 18185 consists of the following parts, under the general title Freight containers Electron
16、ic seals: Part 1: Communication protocol Part 2: Application requirements Part 3: Environmental characteristics Part 7: Physical layer The following parts are under preparation: Part 4: Data protection Part 6: Message sets for transfer between seal reader and host computer BS ISO 18185-3:2006 Licens
17、ed Copy: sheffieldun sheffieldun, na, Mon Nov 27 01:46:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI v Introduction This part of ISO 18185 defines the environmental characteristics for compliant electronic seals. BS ISO 18185-3:2006 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 01:46:14 GMT
18、+00:00 2006, Uncontrolled Copy, (c) BSI blank Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 01:46:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 1 Freight containers Electronic seals Part 3: Environmental characteristics 1Scope This part of ISO 18185 specifies the minimum environmental chara
19、cteristics for electronic seals. This part of ISO 18185 describes the environmental requirements for the ISO 18185 series, for ISO 10374 (Freight containers RF automatic identification) and for ISO 17363 (Supply chain applications of RFID Freight containers), since it is expected that the implementa
20、tion of these International Standards will face the same environmental conditions. However, each of these International Standards has its own unique requirements other than environmental conditions. 2Normative references The following referenced documents are indispensable for the application of thi
21、s document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 668, Series 1 freight containers Classification, dimensions and ratings ISO 830, Freight containers Vocabulary ISO 17712, Fr
22、eight containers Mechanical seals ISO 18185-1:1), Freight containers Electronic seals Part 1: Communication protocol ISO 18185-2:2), Freight containers Electronic seals Part 2: Application requirements ISO 18185-7:3), Freight containers Electronic seals Part 7: Physical layer ISO/IEC 19762-1, Inform
23、ation technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 1: General terms relating to AIDC ISO/IEC 19762-3, Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 3: Radio frequency identification (
24、RFID) IEC 60068-2-1, Environmental testing Part 2: Tests. Tests A: Cold IEC 60068-2-2, Environmental testing Part 2: Tests. Tests B: Dry heat IEC 60068-2-11, Environmental testing Part 2: Tests. Test Ka: Salt mist 1)To be published. 2)To be published. 3)To be published. BS ISO 18185-3:2006 Licensed
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 18185 2006
链接地址:https://www.31doc.com/p-3745622.html