BS-ISO-7588-1-1998.pdf
《BS-ISO-7588-1-1998.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-7588-1-1998.pdf(16页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 7588-1:1998 Road vehicles Electrical/electronic switching devices Part 1: Relays and flashers ICS 43.040.10; 43.040.20 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 14:08:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 7588-1:1998 This British Standard, having b
2、een prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 November 1998 BSI 05-1999 ISBN 0 580 30770 0 National foreword This British Standard reproduces verbatim ISO 7588-1:1998 and implements it as
3、 the UK national standard. It supersedes BS AU 201-1:1985 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee AUE/16, Electrical and electronic equipment, which has the responsibility to: aid enquirers to understand the text; present to the responsible in
4、ternational/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to
5、its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI
6、Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary o
7、f pages This document comprises a front cover, an inside front cover, pages i and ii, the ISO title page, pages ii to iv, pages 1 to 6 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the
8、inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 14:08:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 7588-1:1998 BSI 05-1999i Contents Page National forewordInside front cover Forewordiii Text of ISO 7588-11 Li
9、censed Copy: sheffieldun sheffieldun, na, Sun Nov 26 14:08:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 14:08:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 14:08:59 GMT+00:00 2006,
10、 Uncontrolled Copy, (c) BSI BS ISO 7588-1:1998 ii BSI 05-1999 Contents Page Forewordiii 1Scope 1 2Normative references 1 3Definitions1 4Dimensions and other requirements1 5Functional allocation of the terminals 3 6Designation 4 Annex A (informative) Dimensions of socket apertures 5 Annex B (informat
11、ive) Positioning and functional allocation of flasher terminals5 Figure 11 Figure 2 2 Figure 3 2 Figure A.15 Figure B.1 5 Table 1 3 Table 2 3 Table B.1 6 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 14:08:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 7588-1:1998 BSI 05-1999iii Forew
12、ord ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a techni
13、cal committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of e
14、lectrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 7588-1 was pr
15、epared by Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 3, Electrical and electronic equipment. This first edition of ISO 7588-1 cancels and replaces ISO 7588:1983, which has been technically revised. ISO 7588 consists of the following parts, under the general title Road vehicles Ele
16、ctrical/electronic switching devices: Part 1: Relays and flashers; Part 2: Electronic devices; Part 3: Microrelays. Annex A and Annex B of this part of ISO 7588 are for information only. Descriptors: Road vehicles, motor vehicles, electrical equipment, electric relays, flasher units, electric termin
17、als, electric contacts, form specifications, dimensions, overall dimensions, position (location), contact allocation, designation. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 14:08:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iv blank Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 2
18、6 14:08:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 7558-1:1998 BSI 05-19991 1 Scope This part of ISO 7588 specifies dimensional characteristics and the functional allocation of relay and flasher terminals intended for road vehicles. Annex A gives additional information on the dimensions of
19、 socket apertures and Annex B gives additional information on the different terminal functional allocation of flasher unit systems. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 7588. At the time of
20、publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO 7588 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registe
21、rs of currently valid International Standards. ISO 8092-1:1996, Road vehicles Connections for on-board electrical wiring harnesses Part 1: Tabs for single-pole connections Dimensions and specific requirements. ISO 8092-2:, Road vehicles Connections for on-board electrical wiring harnesses Part 2: De
22、finitions, test methods and general performance requirements1). 3 Definitions For the purposes of this part of ISO 7588, the definitions given in ISO 8092-2 apply. 4 Dimensions and other requirements 4.1 General Dimensional characteristics and other requirements are specified in 4.2 to 4.4. NOTEAll
23、corresponding dimensions also apply if less than five tabs are fitted. The dimensions of socket apertures given in Annex A are for information only. The functional allocation of relay terminals is specified in clause 5 and that of flasher terminals is shown in Annex B. 4.2 Positioning zones of the t
24、abs and socket apertures 4.2.1 Location of tabs and apertures True position See Figure 1. 1) To be Published. (Revision of ISO 8092-2:1996) Figure 1 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 14:08:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 7588-1:1998 2 BSI 05-1999 4.2.2 Dimen
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 7588 1998
链接地址:https://www.31doc.com/p-3745670.html