BS-ISO-7738-2001.pdf
《BS-ISO-7738-2001.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-7738-2001.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 7738:2001 Assembly tools for screws and nuts Combination wrenches Lengths of wrenches and maximum thickness of heads ICS 25.140.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 08:30:01 GMT+00:00
2、2006, Uncontrolled Copy, (c) BSI BS ISO 7738:2001 This British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 June 2001 BSI 06-2001 ISBN 0 580 37614 1 National foreword T
3、his British Standard reproduces verbatim ISO 7738:2001 and implements it as the UK national standard. The UK participation in its preparation was entrusted by Technical Committee MTE/15, Hand tools, to Subcommittee MTE/15/3, Assembly tools for screws and nuts, pliers and nippers, which has the respo
4、nsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “I
5、nternational Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance wit
6、h a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related internat
7、ional and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 3 and a back cover. The BSI copyright date displayed in this document indicates when the docume
8、nt was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 08:30:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Reference number ISO 7738:2001(E) INTERNATIONAL STANDARD ISO 7738 Third edition 2001-04-01 Assembly tools for screw
9、s and nuts Combination wrenches Lengths of wrenches and maximum thickness of heads Outils de manuvre pour vis et crous Cls mixtes de serrage Longueurs des cls et paisseurs maximales des ttes Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 08:30:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI IS
10、O 7738:2001(E) I ii Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 08:30:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 7738:2001(E) iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work o
11、f preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmenta
12、l, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft In
13、ternational Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this Internati
14、onal Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 7738 was prepared by Technical Committee ISO/TC 29, Small tools, Subcommittee SC 10, Assembly tools for screws and nuts, pliers and nippers.
15、This third edition cancels and replaces the second edition (ISO 7738:1990), which has been technically revised. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 08:30:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 08:30:01 GMT+00:00 2006, U
16、ncontrolled Copy, (c) BSI INTERNATIONAL STANDARDISO 7738:2001(E) 1 Assembly tools for screws and nuts Combination wrenches Lengths of wrenches and maximum thickness of heads 1Scope This International Standard specifies the overall length and the maximum head thickness of combination wrenches, offset
17、 (Form A) and modified offset (Form B). NOTECombination wrenches are listed in ISO 1703:1983, Assembly tools for screws and nuts Nomenclature, under number 13 (Form A) and 14 (Form B). 2Normative reference The following normative document contains provisions which, through reference in this text, co
18、nstitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent e
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 7738 2001
链接地址:https://www.31doc.com/p-3745671.html