BS-EN-62282-2-2004.pdf
《BS-EN-62282-2-2004.pdf》由会员分享,可在线阅读,更多相关《BS-EN-62282-2-2004.pdf(40页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 62282-2:2004 Incorporating amendment no. 1 Fuel cell technologies Part 2: Fuel cell modules The European Standard EN 62282-2:2004, incorporating amendment A1:2007, has the status of a British Standard ICS 27.070 ? Licensed Copy: London South Bank University, London South Bank
2、University, Tue Jul 03 01:02:45 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 62282-2:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 10 December 2004 BSI 2007 ISBN 978 0 580 50869 1 National foreword This British Standard is the UK i
3、mplementation of EN 62282-2:2004, incorporating amendment A1:2007. It is identical with IEC 62282-2:2004, incorporating amendment 1:2007. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. Tags indicating changes to IEC text carry the number of the I
4、EC amendment. For example, text altered by IEC amendment 1 is indicated in the text by !“. The UK participation in its preparation was entrusted to Technical Committee GEL/105, Fuel cell technologies. A list of organizations represented on this committee can be obtained on request to its secretary.
5、This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments 1717429 June 2007See
6、 national foreword Licensed Copy: London South Bank University, London South Bank University, Tue Jul 03 01:02:45 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD EN 62282-2 NORME EUROPENNE EUROPISCHE NORM November 2004 CENELEC European Committee for Electrotechnical Standardization Comi
7、t Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62282-2:2004 E ICS 27.070
8、 English version Fuel cell technologies Part 2: Fuel cell modules (IEC 62282-2:2004) Technologies des piles combustible Partie 2: Modules piles combustible (CEI 62282-2:2004) Brennstoffzellentechnologien Teil 2: Brennstoffzellen-Module (IEC 62282-2:2004) This European Standard was approved by CENELE
9、C on 2004-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards
10、 may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified
11、 to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal
12、ta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. + A1 April 2007 Licensed Copy: London South Bank University, London South Bank University, Tue Jul 03 01:02:45 GMT+00:00 2007, Uncontrolled Copy, (c) BSI Foreword The text of document 105/73
13、/FDIS, future edition 1 of IEC 62282-2, prepared by IEC TC 105, Fuel cell technologies, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62282-2 on 2004-10-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publi
14、cation of an identical national standard or by endorsement (dop) 2005-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2007-10-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62282-2:2004 was a
15、pproved by CENELEC as a European Standard without any modification. _ Page 2 EN 622822:2004 Foreword to amendment A1 The text of document 105/111/CDV, future amendment 1 to IEC 62282-2:2004, prepared by IEC TC 105, Fuel cell technologies, was submitted to the IEC-CENELEC parallel Unique Acceptance P
16、rocedure and was approved by CENELEC as amendment A1 to EN 62282-2:2004 on 2007-04-01. The following dates were fixed: latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-01-01 latest date by which t
17、he national standards conflicting with the amendment have to be withdrawn (dow) 2010-04-01 _ Endorsement notice The text of amendment 1:2007 to the International Standard IEC 62282-2:2004 was approved by CENELEC as an amendment to the European Standard without any modification. _ Licensed Copy: Lond
18、on South Bank University, London South Bank University, Tue Jul 03 01:02:45 GMT+00:00 2007, Uncontrolled Copy, (c) BSI CONTENTS INTRODUCTION.4 1 Scope.5 2 Normative references .6 3 Terms and definitions .7 4 Requirements.11 4.1 General safety strategy .11 4.2 Design requirements .12 5 Type tests 16
19、5.1 Gas leakage test .16 5.2 Normal operation.17 5.3 Allowable working pressure test 18 5.4 Pressure withstanding test of cooling system 18 5.5 Electrical overload test 19 5.6 Overpressure test19 5.7 Dielectric strength test.19 5.8 Differential pressure test .20 5.9 Gas leakage test (repeat)20 5.10
20、Normal operation (repeat) .21 5.11 Flammable concentration test21 5.12 Tests of abnormal conditions.21 6 Routine tests 23 6.1 Gas-tightness test .23 6.2 Dielectric strength withstand test.23 7 Markings and instructions.23 7.1 Nameplate.23 7.2 Marking .24 7.3 Warning label 24 7.4 Documentation 24 Ann
21、ex A (informative) Additional information for the performance and evaluation of the tests28 Bibliography34 Figure 1 Fuel cell system components and scope of standard6 Table 1 Dielectric strength test voltages (derived from EN 50178) .20 Table A.1 Viscosity of gases at one atmosphere 31 Page 3 EN 622
22、822:2004 Licensed Copy: London South Bank University, London South Bank University, Tue Jul 03 01:02:45 GMT+00:00 2007, Uncontrolled Copy, (c) BSI INTRODUCTION Fuel cell modules, as defined later, are electrochemical devices which convert continuously supplied fuel, such as hydrogen or hydrogen rich
23、 gases, alcohols, hydrocarbons, and oxidants to d.c. power, heat, water and other by-products. NOTE The term fuel cell module describes a subassembly that could comprise slightly more than a stack, for example, sensors, enclosure. This assembly is intended to be integrated into an end product by a s
24、ystems integrator. Page 4 EN 622822:2004 Licensed Copy: London South Bank University, London South Bank University, Tue Jul 03 01:02:45 GMT+00:00 2007, Uncontrolled Copy, (c) BSI FUEL CELL TECHNOLOGIES Part 2: Fuel cell modules 1 Scope This part of IEC 62282 provides the minimum requirements for saf
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 62282 2004
链接地址:https://www.31doc.com/p-3745700.html