BS-EN-ISO-10472-1-1998.pdf
《BS-EN-ISO-10472-1-1998.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-10472-1-1998.pdf(28页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 10472-1:1998 Incorporating Corrigendum No. 1 Safety requirements for industrial laundry machinery Part 1: Common requirements (ISO 10472-1:1997) The European Standard EN ISO 10472-1:1997 has the status of a British Standard ICS 97.060 BS EN ISO 10472-1:1998 This British St
2、andard, having been prepared under the direction of the Sector Board for Materials and Chemicals, was published under the authority of the Standards Board and comes into effect on 15 March 1998 BSI 05-1999 ISBN 0 580 29394 7 National foreword This British Standard is the English language version of
3、EN ISO 10472-1:1997. It is identical with ISO 10472-1:1997. The UK participation in its preparation was entrusted to Technical Committee TCI/33, Textile machinery, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any e
4、nquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references Atte
5、ntion is drawn to the fact that CEN and CENELEC standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement these international or European publications may be found in the BS
6、I Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are respon
7、sible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN ISO title page, page 2, the ISO title page, pages ii to iv, pages 1
8、 to 16, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments 10222 Corrigendum December 19
9、98 Indicated by a sideline in the margin BS EN ISO 10472-1:1998 BSI 05-1999i Contents Page National forewordInside front cover Foreword2 Forewordiii Text of ISO 10472-11 ii blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10472-1 December 1997 ICS 97.060 Descriptors: See ISO document E
10、nglish version Safety requirements for industrial laundry machinery Part 1: Common requirements (ISO 10472-1:1997) Exigences de scurit pour les machines de blanchisserie industrielle Partie 1: Prescriptions communes (ISO 10472-1:1997) Sicherheitsanforderungen fr industrielle Wschereimaschinen Teil 1
11、: Gemeinsame Anforderungen (ISO 10472-1:1997) This European Standard was approved by CEN on 21 December 1997. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alter
12、ation. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by transl
13、ation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, I
14、taly, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1997 CEN All rights of exploitation in any
15、 form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10472-1:1997 E EN ISO 10472-1:1997 BSI 05-1999 2 Foreword The text of the International Standard ISO 10472-1:1997 has been prepared by Technical Committee ISO/TC 72 “Textile machinery and machinery for dry-cleaning a
16、nd industrial laundering” in collaboration with Technical Committee CEN/TC 214 “Textile machinery and machinery for dry-cleaning and industrial laundry”, the secretariat of which is held by SNV. This European Standard has been prepared under a mandate given to CEN by the European Commission and the
17、European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of this standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followi
18、ng countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the Internati
19、onal Standard ISO 10472-1:1997 was approved by CEN as a European Standard without any modification. NOTENormative references to International Standards are listed in Annex ZA (normative). EN ISO 10472-1:1997 ii BSI 05-1999 Contents Page Forewordiii Introduction1 1Scope1 2Normative references2 3Defin
20、itions3 4Significant hazards connected with most industrial laundry machinery3 5Safety requirements and/or measures for the hazards identified in clause 44 5.1Mechanical hazards4 5.1.1Escape and rescue of trapped persons4 5.1.2Guards and safety devices4 5.1.3Fault-finding, cleaning or maintenance5 5
21、.1.4Complex installation5 5.2Electrical hazards6 5.3Thermal hazards6 5.4Hazards generated by noise7 5.5Hazards associated with materials and substances8 5.5.1Contact with or inhalation of harmful fluids, gases, mists, fumes and dusts8 5.5.2Fire and explosion8 5.5.3Decomposition of substances8 5.5.4B
22、iological hazards8 5.6Hazards due to neglect of ergonomic principles in machine design8 5.7Failure of energy supply and control systems9 5.7.1Failure of energy supply9 5.7.2Failure of control systems9 5.8Hazards arising during maintenance and/or elimination of process faults9 6Verification of safety
23、 requirements and/or measures9 7Information concerning machine use12 7.1Instruction handbook12 7.2Warning signs12 Annex A (normative) Additional specification for fence guards13 Annex B (informative) Layouts of plants13 Annex C (informative) Bibliography15 Annex ZA (normative) Normative references t
24、o international publications with their relevant European publicationsInside back cover Annex ZB (informative) Relationship of this European Standard with EU DirectivesInside back cover Figure B.1 Layout of medium-size plant13 Figure B.2 Layout of large-size plant14 Table 1 Safety requirements and/o
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 10472 1998
链接地址:https://www.31doc.com/p-3746019.html