BS-EN-ISO-10472-6-1998.pdf
《BS-EN-ISO-10472-6-1998.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-10472-6-1998.pdf(22页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 10472-6:1998 Incorporating Corrigendum No. 1 Safety requirements for industrial laundry machinery Part 6: Ironing and fusing presses (ISO 10472-6:1997) The European Standard EN ISO 10472-6:1997 has the status of a British Standard ICS 97.060 Licensed Copy: sheffieldun shef
2、fieldun, na, Mon Nov 20 03:12:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 10472-6:1998 This British Standard, having been prepared under the direction of the Sector Board for Materials and Chemicals, was published under the authority of the Standards Board and comes into effect on 15 Mar
3、ch 1998 BSI 05-1999 ISBN 0 580 29399 8 National foreword This British Standard is the English language version of EN ISO 10472-6:1997. It is identical with ISO 10472-6:1997. The UK participation in its preparation was entrusted to Technical Committee TCI/33, Textile machinery, which has the responsi
4、bility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list
5、 of organizations represented on this committee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC standards normally include an annex which lists normative references to international publications with their corresponding European publi
6、cations. The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Stan
7、dard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover,
8、 an inside front cover, pages i and ii, the EN ISO title page, page 2, the ISO title page, pages ii to iv, pages 1 to 10 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front c
9、over. Amendments issued since publication Amd. No.DateComments 10227 Corrigendum January 1999 Indicated by a sideline in the margin Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 03:12:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 10472-6:1998 BSI 05-1999i Contents Page National fo
10、rewordInside front cover Foreword2 Forewordiii Text of ISO 10472-61 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 03:12:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 03:12:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN
11、STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10472-6 December 1997 ICS 97.060 Descriptors: See ISO document English version Safety requirements for industrial laundry machinery Part 6: Ironing and fusing presses (ISO 10472-6:1997) Exigences de scurit pour les machines de blanchisserie industriell
12、e Partie 6: Presses repasser et thermocoller (ISO 10472-6:1997) Sicherheitsanforderungen fr industrielle Wschereimaschinen Teil 6: Bgel- und Fixierpressen (ISO 10472-6:1997) This European Standard was approved by CEN on 24 December 1997. CEN members are bound to comply with the CEN/CENELEC Internal
13、Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. Th
14、is European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are t
15、he national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Eu
16、ropisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1997 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10472-6:1997 E Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 03:12:24 GMT+00:00
17、 2006, Uncontrolled Copy, (c) BSI EN ISO 10472-6:1997 BSI 05-1999 2 Foreword The text of the International Standard ISO 10472-6:1997 has been prepared by Technical Committee ISO/TC 72 “Textile machinery and machinery for dry-cleaning and industrial laundering” in collaboration with Technical Committ
18、ee CEN/TC 214 “Textile machinery and machinery for dry-cleaning and industrial laundry”, the secretariat of which is held by SNV. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requireme
19、nts of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of this standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austr
20、ia, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the International Standard ISO 10472-6:1997 was approved by CEN as a European
21、Standard without any modification. NOTENormative references to International Standards are listed in Annex ZA (normative). Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 03:12:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 03:12:24 GMT+00
22、:00 2006, Uncontrolled Copy, (c) BSI EN ISO 10472-6:1997 ii BSI 05-1999 Contents Page Forewordiii Introduction1 1Scope1 2Normative references1 3Definitions2 4Hazards2 5Safety requirements and/or measures for the hazards identified in clause 43 5.1General3 5.2Mechanical hazards3 5.2.1Closing and pres
23、sing of the head and buck of all presses3 5.2.2Operating mechanism of the head and buck of all presses4 5.2.3Falling of the head of scissor presses4 5.3Electrical hazards4 5.4Thermal hazards4 5.4.1Hot surfaces of all presses, covered and uncovered4 5.4.2Free steam affecting the operator (for scissor
24、 presses)4 5.4.3Radiated and convected heat affecting the operator (for scissor presses)5 5.5Hazards generated by noise5 5.6Hazards caused by harmful fumes, for fusing presses5 5.7Hazards due to neglect of ergonomic principles in machine design of all presses5 5.7.1Inappropriate posture and effort5
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 10472 1998
链接地址:https://www.31doc.com/p-3746037.html