BS-EN-61003-1-2004.pdf
《BS-EN-61003-1-2004.pdf》由会员分享,可在线阅读,更多相关《BS-EN-61003-1-2004.pdf(34页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61003-1:2004 Industrial-process control systems Instruments with analogue inputs and two- or multi-state outputs Part 1: Methods of evaluating performance The European Standard EN 61003-1:2004 has the status of a British Standard ICS 32.240.50; 25.040.40 ? Licensed Copy: sheff
2、ieldun sheffieldun, na, Thu Nov 09 09:06:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61003-1:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 6 May 2004 BSI 6 May 2004 ISBN 0 580 43730 2 National foreword This British Standard is
3、the official English language version of EN 61003-1:2004. It is identical with IEC 61003-1:2004. It supersedes BS EN 61003-1:1993 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee GEL/65, Measurement and control, to Subcommittee GEL/65/2, Elements of sy
4、stems, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue u
5、nder the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct a
6、pplication. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed
7、; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 30, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicat
8、es when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 09:06:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD EN 61003-1 NORME EUROPENNE EUROPISCHE NORM April 2004 CENELEC European Committe
9、e for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC mem
10、bers. Ref. No. EN 61003-1:2004 E ICS 32.240.50; 25.040.40 Supersedes EN 61003-1:1993 English version Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs Part 1: Methods of evaluating performance (IEC 61003-1:2004) Processus industriels - Instruments
11、avec entres analogiques et sorties deux ou plusieurs tats Partie 1: Mthodes dvaluation des performances (CEI 61003-1:2004) Systeme der industriellen Prozessleittechnik - Gerte mit analogen Eingngen und Zwei- oder Mehrpunktverhalten Teil 1: Verfahren zur Bewertung des Betriebsverhaltens (IEC 61003-1:
12、2004) This European Standard was approved by CENELEC on 2004-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliograp
13、hical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of
14、a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
15、 Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 09:06:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Foreword The text of document 65
16、B/516/FDIS, future edition 2 of IEC 61003-1, prepared by SC 65B, Devices, of IEC TC 65, Industrial-process measurement and control, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61003-1 on 2004-03-01. This European Standard supersedes EN 61003-1:1993. It takes into
17、 account the common standardized basis specified in the EN 61298 series. Any test method or procedure specified and described herein is referred to the corresponding Clause of the EN 61298 series. Any particular method or procedure not covered by the EN 61298 series is developed and specified in thi
18、s standard in accordance with the criteria stated in the EN 61298 series, as far as they are applicable. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-12-01 latest date
19、 by which the national standards conflicting with the EN have to be withdrawn (dow) 2007-03-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61003-1:2004 was approved by CENELEC as a European Standard without any modification. _ Page 2 EN 610031:
20、2004 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 09:06:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI CONTENTS INTRODUCTION.4 1 Scope.5 2 Normative references5 3 Terms and definitions .6 4 General conditions for tests 7 4.1 Documentary information.7 4.2 Safety7 4.3 Installation.7 4.4 Suppl
21、y conditions.8 5 General testing procedures and precautions8 5.1 Checking of calibration made prior to delivery 8 5.2 Set point8 5.3 Switching differential8 6 Test methods and procedures.8 6.1 Tests under reference conditions .8 6.2 Tests for the effects of influence quantities 11 6.3 Other tests 18
22、 7 Multi-state instrument .20 7.1 Action20 7.2 Tests.20 7.2.1 Characteristics of the multi-state instrument.20 7.2.2 Mutual influence of pairs of switching points.20 7.2.3 Determination of switching range .20 8 General observations20 8.1 Protective finishes .20 8.2 Design features .21 8.3 Tools and
23、equipment .21 9 Test report and summary of tests22 10 Other considerations.26 10.1 Routine maintenance and adjustment 26 10.2 Repair .26 10.3 Partial evaluation.26 Page 3 EN 610031:2004 Annex ZA (normative) Normative references to international publications with their corresponding European publicat
24、ions . 30 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 09:06:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI INTRODUCTION The methods of evaluation specified in this part of IEC 61003 are intended for use by manufacturers to determine the performance of their products and by users, or indepe
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 61003 2004
链接地址:https://www.31doc.com/p-3746161.html