BS-EN-61029-1-2000.pdf
《BS-EN-61029-1-2000.pdf》由会员分享,可在线阅读,更多相关《BS-EN-61029-1-2000.pdf(88页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61029-1:2000 Incorporating Amendment No. 1 Safety of transportable motor-operated electric tools Part 1: General requirements The European Standard EN 61029-1:2000, with the incorporation of amendment A1:2003, has the status of a British Standard ICS 25.140.20 ? Licensed Copy:
2、 sheffieldun sheffieldun, na, Thu Nov 09 09:06:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61029-1:2000 This British Standard, having been prepared under the direction of the Electrotechnical Sector Committee, was published under the authority of the Standards Policy and Strategy Committee a
3、nd comes into effect on 15 October 2000 BSI 12 December 2003 ISBN 0 580 36394 5 National foreword This British Standard is the official English language version of EN 61029-1:2000, including amendments A11:2003 and A12:2003. It was derived by CENELEC from IEC 61029-1:1990. It supersedes BS EN 61029-
4、1:1996 which will be withdrawn on 2002-09-01. The CENELEC common modifications have been implemented at the appropriate places in the text. The start and finish of each common modification is indicated in the text by tags . Where a common modification has been introduced by amendment, the tags carry
5、 the number of the amendment. For example, the common modifications introduced by CENELEC amendment A11 are indicated by . The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/6, Portable mo
6、tor-operated tools, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BS
7、I Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for
8、its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK inter
9、ests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 84, an inside back cover and a back cover. The BSI copyright notice displayed in this doc
10、ument indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments 1462212 December 2003See national foreword Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 09:06:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPIS
11、CHE NORM EN 61029-1 February 2000 +A11 May 2003 +A12 May 2003 ICS 25.140.20Supersedes EN 61029-1:1995 English version Safety of transportable motor-operated electric tools Part 1: General requirements (includes amendments A11:2003 and A12:2003) (IEC 61029-1:1990, modified) Scurit des machines-outils
12、 lectriques semi-fixes Partie 1: Rgles gnrales (inclut les amendements A11:2003 et A12:2003) (CEI 61029-1:1990, modifie) Sicherheit transportabler motorbetriebener Elektrowerkzeuge Teil 1: Allgemeine Anforderungen (enthlt nderungen A11:2003 und A12:2003) (IEC 61029-1:1990, modifiziert) This European
13、 Standard was approved by CENELEC on 1998-08-01. Amendment A11 was approved by CENELEC on 2002-10-01 and amendment A12 was approved by CENELEC on 2002-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
14、 the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French,
15、 German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cze
16、ch Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrot
17、echnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 2000 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61029-1:2000 + A11:2003 + A12:2003 E Licensed Copy: sheffieldun
18、sheffieldun, na, Thu Nov 09 09:06:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 2 EN 61029-1:2000 Foreword This European Standard has been prepared by the Technical Committee CENELEC TC 61F, Hand-held and transportable motor operated electric tools. The text of the International Standard IEC 61
19、029-1 with CENELEC common modifications was submitted to the formal vote and was approved by CENELEC as EN 61029-1 on 1998-08-01. This European Standard supersedes EN 61029-1:1995. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of
20、 an identical national standard or by endorsement (dop) 2000-09-01 - latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2001-09-01 Part 1 of this standard together with related Parts 2 gives directly and by reference the complete requirements for the speci
21、fic type of transportable tool defined in the scope. Other standards to which this European Standard refers are listed in Annex A. This annex lists the valid edition of these documents at the time of issue of this EN. All reference to these standards is however to be understood to be a reference to
22、the latest edition. This standard is divided into two parts: Part 1 General requirements which are common to most transportable electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard Part 2 Requirements for part
23、icular types of tool which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This European Standard has been prepared under a mandate given to CEN/CENELEC by the European Commission and the European Free Tr
24、ade Association and supports the essential safety requirements of the Machinery Directive. Compliance with the relevant clauses of Part 1 together with a relevant Part 2 of this standard provides one means of conforming with the essential health and safety requirements of the Directive. A relevant P
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 61029 2000
链接地址:https://www.31doc.com/p-3746162.html