BS-EN-ISO-3834-3-2005.pdf
《BS-EN-ISO-3834-3-2005.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-3834-3-2005.pdf(18页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 3834-3:2005 Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements The European Standard EN ISO 3834-3:2005 has the status of a British Standard ICS 25.160.01 ? BS EN ISO 3834-3:2005 This British Standard was published under the
2、 authority of the Standards Policy and Strategy Committee on 19 January 2006 BSI 19 January 2006 ISBN 0 580 47622 7 National foreword This British Standard is the official English language version of EN ISO 3834-3:2005. It is identical with ISO 3834-3:2005. It supersedes BS EN 729-3:1995 which is wi
3、thdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/-/1, Briefing committee for welding, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or pr
4、oposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement interna
5、tional or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purpor
6、t to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title pa
7、ge, the EN ISO foreword page, the ISO title page, pages ii to iv, pages 1 to 9 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NOR
8、M EN ISO 3834-3 December 2005 ICS 25.160.01 Supersedes EN 729-3:1994 English Version Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005) Exigences de qualit en soudage par fusion des matriaux mtalliques - Partie 3: Exigences de qual
9、it normale (ISO 3834-3:2005) Qualittsanforderungen fr das Schmelzschweien von metallischen Werkstoffen - Teil 3: Standard- Qualittsanforderungen (ISO 3834-3:2005) This European Standard was approved by CEN on 28 October 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations
10、which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European
11、Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national
12、standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN
13、 COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 3834-3:2005: E Foreword Th
14、is document (EN ISO 3834-3:2005) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes“ in collaboration with Technical Committee CEN/TC 121 “Welding“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either
15、by publication of an identical text or by endorsement, at the latest by June 2006, and conflicting national standards shall be withdrawn at the latest by June 2006. This document supersedes EN 729-3:1994. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
16、following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, S
17、weden, Switzerland and United Kingdom. Endorsement notice The text of ISO 3834-3:2005 has been approved by CEN as EN ISO 3834-3:2005 without any modifications. EN ISO 3834-3:2005 Reference number ISO 3834-3:2005(E) INTERNATIONAL STANDARD ISO 3834-3 Second edition 2005-12-15 Quality requirements for
18、fusion welding of metallic materials Part 3: Standard quality requirements Exigences de qualit en soudage par fusion des matriaux mtalliques Partie 3: Exigences de qualit normale EN ISO 3834-3:2005 ii iii Contents Page Foreword iv 1 Scope . 1 2 Normative references. 1 3 Terms and definitions. 1 4 Us
19、e of this part of ISO 3834. 1 5 Review of requirements and technical review. 2 6 Sub-contracting 3 7 Welding personnel 3 8 Inspection and testing personnel . 4 9 Equipment . 4 10 Welding and related activities . 5 11 Storage and handling welding consumables 6 12 Storage of parent materials . 6 13 Po
20、st-weld heat treatment. 6 14 Inspection and testing 6 15 Non-conformance and corrective actions 8 16 Calibration and validation of measuring, inspection and testing equipment 8 17 Identification and traceability 8 18 Quality records 8 EN ISO 3834-3:2005 iv Foreword ISO (the International Organizatio
21、n for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has
22、 the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Inter
23、national Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publicat
24、ion as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent righ
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 3834 2005
链接地址:https://www.31doc.com/p-3746334.html