BS-EN-ISO-11114-1-1998.pdf
《BS-EN-ISO-11114-1-1998.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-11114-1-1998.pdf(36页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 11114-1:1998 Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials The European Standard EN ISO 11114-1:1997, including Corrigendum April 1998, has the status of a British Standard ICS 23.020.30; 23.060.40 Li
2、censed Copy: sheffieldun sheffieldun, na, Sat Nov 18 15:59:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 11114-1:1998 This British Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into eff
3、ect on 15 July 1998 BSI 05-1999 ISBN 0 580 29743 8 National foreword This British Standard is the English language version of EN ISO 11114-1:1997, including Corrigendum April 1998. It is identical with ISO 11114-1:1997. The UK participation in its preparation was entrusted by Technical Committee PVE
4、/3, Gas containers, to Subcommittee PVE/3/1, Valve fittings for gas containers, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests i
5、nformed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an ann
6、ex which lists normative references to international publications with their corresponding European publications. The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “Internat
7、ional Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a Bri
8、tish Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN ISO title page, pages 2 to 30 and a back cover. This standard has been updated (see copyright date) and may have had amendmen
9、ts incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 15:59:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 11114-1:1998 BSI 05-1999i Contents P
10、age National forewordInside front cover Foreword2 Text of EN ISO 11114-13 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 15:59:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 15:59:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUR
11、OPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11114-1 October 1997 ICS 23.020.30; 23.060.40Incorporates Corrigendum April 1998 Descriptors: Gas pressure vessels, metal products, gas cylinders, gas valves, gases, compatibility, estimation, selection, rules (instructions) English version Trans
12、portable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials (ISO 11114-1:1997) Bouteilles gaz transportables Compatibilit des matriaux des bouteilles et des robinets avec les contenus gazeux Partie 1: Matriaux mtalliques (ISO 11114-1:1997) Ortsbe
13、wegliche Gasflaschen Vertrglichkeit von Werkstoffen fr Gasflaschen und Ventile mit den in Berhrung kommenden Gasen Teil 1: Metallische Werkstoffe (ISO 11114-1:1997) This European Standard was approved by CEN on 18 September 1997. CEN members are bound to comply with the CEN/CENELEC Internal Regulati
14、ons which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This Europ
15、ean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the natio
16、nal standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europische
17、s Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1997 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11114-1:1997 E Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 15:59:38 GMT+00:00 2006, U
18、ncontrolled Copy, (c) BSI EN ISO 11114-1:1997 BSI 05-1999 2 Foreword The text of EN ISO 11114-1:1997 has been prepared by Technical Committee CEN/TC 23 “Transportable gas cylinders” the secretariat of which is held by BSI in collaboration with Technical Committee ISO/TC 58 “Gas cylinders”. The text
19、of the draft standard was submitted to the Formal Vote and was approved by CEN as EN ISO 11114-1 on 97-09-18. This European Standard has been submitted for reference into the RID and/or in the technical annexes of the ADR. Therefore in this context the standards listed in the normative references an
20、d covering basic requirements of the RID/ADR not addressed within the present standard are normative only when the standards themselves are referred to in the RID and/or the technical annexes of the ADR. This European Standard shall be given the status of a national standard, either by publication o
21、f an identical text or by endorsement, at the latest by April 1998, and conflicting national standards shall be withdrawn at the latest by April 1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europe
22、an Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword2 Introduction3 1Scope3 2Normative references3 3Definitions3 4Materia
23、ls4 5Compatibility criteria4 6Material compatibility5 Annex A (normative) Gas/Materials NQSAB compatibility code20 Annex ZZ (informative) Corresponding International and European Standards for which equivalents are not given in the text30 Table 1 Gas/material compatibility6 Table A.1 List of gases w
24、ith the corresponding NQSAB compatibility code21 Table A.2 Group 128 Table A.3 Group 229 Table A.4 Group 329 Table A.5 Group 429 Table A.6 Group 529 Table A.7 Group 629 Table A.8 Group 729 Table A.9 Group 829 Table A.10 Group 929 Table A.11 Group 1029 Table A.12 Group 1129 Licensed Copy: sheffieldun
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 11114 1998
链接地址:https://www.31doc.com/p-3746468.html