BS-EN-ISO-13503-3-2005.pdf
《BS-EN-ISO-13503-3-2005.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-13503-3-2005.pdf(56页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 13503-3:2005 Incorporating corrigendum no. 1 Petroleum and natural gas industries Completion fluids and materials Part 3: Testing of heavy brines The European Standard EN ISO 13503-3:2005 has the status of a British Standard ICS 75.100 ? Licensed Copy: London South Bank Un
2、iversity, London South Bank University, Wed Oct 17 01:20:50 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN ISO 13503-3:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 13 January 2006 BSI 2007 ISBN 978 0 580 60342 6 National foreword Th
3、is British Standard is the UK implementation of EN ISO 13503-3:2005, incorporating corrigendum July 2007. It is identical with ISO 13503-3:2005, incorporating corrigendum April 2006. The UK participation in its preparation was entrusted by Technical Committee PSE/17, Material and equipment for petro
4、leum, petrochemical and natural gas industries, to Subcommittee PSE/17/-/3, Drilling and completion fluids and well cements. A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions
5、 of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments 17385 Corrigendum No. 1 31 October 2007Correction to French title on the EN ISO cover page an
6、d ISO cover page Licensed Copy: London South Bank University, London South Bank University, Wed Oct 17 01:20:50 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 13503-3 December 2005 ICS 75.100 English Version Petroleum and natural gas industries -
7、Completion fluids and materials - Part 3: Testing of heavy brines (ISO 13503-3:2005) Erdl- und Erdgasindustrie - Komplettierungsflssigkeiten und -materialien - Teil 3: Prfung von schweren Solen (ISO 13503-3:2005) This European Standard was approved by CEN on 9 December 2005. CEN members are bound to
8、 comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Centra
9、l Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as th
10、e official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain
11、, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Me
12、mbers. Ref. No. EN ISO 13503-3:2005: E Industries du ptrole et du gaz naturel - Fluides de denses (ISO 13503-3:2005) matriaux compltion et - Partie 3: Essais de saumures Incorporating corrigendum July 2007 Licensed Copy: London South Bank University, London South Bank University, Wed Oct 17 01:20:50
13、 GMT+00:00 2007, Uncontrolled Copy, (c) BSI Foreword This document (EN ISO 13503-3:2005) has been prepared by Technical Committee ISO/TC 67 “Materials, equipment and offshore structures for petroleum and natural gas industries“ in collaboration with Technical Committee CEN/TC 12 “Materials, equipmen
14、t and offshore structures for petroleum, petrochemical and natural gas industries“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2006, and confli
15、cting national standards shall be withdrawn at the latest by June 2006. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finlan
16、d, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 13503-3:2005 has been approved by CEN as EN ISO 13503-3:200
17、5 without any modifications. EN ISO 13503-3:2005 Licensed Copy: London South Bank University, London South Bank University, Wed Oct 17 01:20:50 GMT+00:00 2007, Uncontrolled Copy, (c) BSI Reference number ISO 13503-3:2005(E) INTERNATIONAL STANDARD ISO 13503-3 First edition 2005-12-15 Petroleum and na
18、tural gas industries Completion fluids and materials Part 3: Testing of heavy brines Partie 3: Essais de saumures denses EN ISO 13503-3:2005 Industries du ptrole et du gaz naturel Fluides de matriaux et compltion Licensed Copy: London South Bank University, London South Bank University, Wed Oct 17 0
19、1:20:50 GMT+00:00 2007, Uncontrolled Copy, (c) BSI ii Licensed Copy: London South Bank University, London South Bank University, Wed Oct 17 01:20:50 GMT+00:00 2007, Uncontrolled Copy, (c) BSI iii Contents Page Foreword. v Introduction. vi 1 Scope . 1 2 Normative references. 1 3 Terms, definitions an
20、d abbreviated terms . 2 3.1 Terms and definitions. 2 3.2 Symbols and abbreviated terms . 2 4 Requirements 4 4.1 Quality control instructions. 4 4.2 Records retention. 4 5 Calibration of equipment . 4 5.1 General requirements. 4 5.2 Reagents and materials for calibration 4 5.3 General requirements fo
21、r calibration of particular apparatus . 5 5.4 Frequency of calibration verification 5 5.5 Calibration verification. 6 6 Density. 7 6.1 General. 7 6.2 Apparatus 9 6.3 Density measurement by hydrometer 10 6.4 Density correction to 21 C (70 F) 11 6.5 Calculation of density in units other than kg/m3. 13
22、 6.6 Calculation for pressure and temperature compensation 14 7 Crystallization temperature . 16 7.1 Principle. 16 7.2 Apparatus 20 7.3 Determination of crystallization point 21 7.4 Calculation of crystallization point. 21 8 Brine clarity. 22 8.1 Principle. 22 8.2 Apparatus 22 8.3 Determination of b
23、rine clarity 23 9 Solids evaluation by gravimetric procedures 23 9.1 Principle. 23 9.2 Apparatus 24 9.3 Preparation of glass-fibre filter disk. 24 9.4 Selection of sample volume 25 9.5 Determination of total suspended solids. 25 9.6 Calculation of total suspended solids 26 9.7 Calculation of precisi
24、on and bias . 26 9.8 Determination of volatile and non-volatile solids 26 9.9 Calculation of non-volatile and volatile solids 27 10 pH . 27 10.1 Principle. 27 10.2 Reagents and materials . 28 10.3 Apparatus 28 10.4 Measurement of pH. 29 EN ISO 13503-3:2005 Licensed Copy: London South Bank University
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 13503 2005
链接地址:https://www.31doc.com/p-3746695.html