BS-EN-ISO-20344-2004.pdf
《BS-EN-ISO-20344-2004.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-20344-2004.pdf(86页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 20344:2004 Incorporating corrigendum no. 1 and amendment no. 1 Personal protective equipment Test methods for footwear The European Standard EN ISO 20344:2004, incorporating amendment A1:2007, has the status of a British Standard ICS 13.340.50 ? BS EN ISO 20344:2004 This B
2、ritish Standard was published under the authority of the Standards Policy and Strategy Committee on 11 August 2004 BSI 2007 ISBN 978 0 580 60489 8 National foreword This British Standard is the UK implementation of EN ISO 20344:2004, incorporating corrigendum December 2005 and amendment A1:2007. It
3、is identical with ISO 20344:2004, incorporating amendment 1:2007. It supersedes BS EN 344-1:1993 and BS EN 344-2:1997 which are withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. Tags indicating changes to ISO text carry the number of the
4、ISO amendment. For example, text altered by ISO amendment 1 is indicated by !“. The UK participation in its preparation was entrusted to Technical Committee PH/1, Safety, protective and occupational footwear. A list of organizations represented on this committee can be obtained on request to its sec
5、retary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments 16165 Corrig
6、endum No. 1 31 August 2006Changes to page 6, clause 2, page 63, 6.14 and page 68, 8.2. 1744431 October 2007See national foreword EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 20344 August 2004 ICS 13.340.50 Supersedes EN 344:1992, EN 344-2:1996 English version Personal protective equipmen
7、t - Test methods for footwear (ISO 20344:2004) Equipement de protection individuelle - Mthodes dessai pour les chaussures (ISO 20344:2004) Persnliche Schutzausrstung - Prfverfahren fr Schuhe (ISO 20344:2004) This European Standard was approved by CEN on 2 January 2004. CEN members are bound to compl
8、y with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secr
9、etariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the offi
10、cial versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Swed
11、en, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members
12、. Ref. No. EN ISO 20344:2004: E Incorporating Corrigendum December 2005 +A1 September 2007 EN ISO 20344:2004 (E) 2 Contents page Foreword5 1. Scope .6 2. Normative references.6 3. Terms and definitions 7 4. Sampling and conditioning7 5. Test methods for whole footwear .9 5.1 Specific ergonomic featu
13、res9 5.2 Determination of upper/outsole and sole interlayer bond strength10 5.2.1 Principle10 5.2.2 Apparatus.10 5.2.3 Preparation of test pieces.11 5.2.4 Measurement of bond strength13 5.2.5 Calculation and expression of results.14 5.3 Determination of internal toecap length.15 5.3.1 Preparation of
14、 test piece.15 5.3.2 Determination of the test axis 15 5.3.3 Test procedure.15 5.4 Determination of impact resistance16 5.4.1 Apparatus.16 5.4.2 Procedure.17 5.5 Determination of compression resistance.20 5.5.1 Apparatus.20 5.5.2 Procedure.20 5.5.3 Test procedure.21 5.6 Determination of corrosion re
15、sistance.21 5.6.1 Determination of corrosion resistance of metallic toecaps or penetration-resistant metallic inserts in classification II footwear21 5.6.2 Determination of corrosion resistance of metallic toecaps in classification I footwear22 5.6.3 Determination of the corrosion resistance of pene
16、tration-resistant metallic inserts in footwear other than all-rubber footwear22 5.7 Determination of leakproofness22 5.7.1 Apparatus.22 5.7.2 Preparation of test piece.22 5.7.3 Procedure.22 5.8 Determination of the dimensional conformity of inserts and the penetration resistance of the sole.22 5.8.1
17、 Dimensional conformity of inserts.22 5.8.2 Determination of the penetration resistance of the sole.23 5.9 Determination of the flex resistance of penetration-resistant inserts 25 5.10 Determination of electrical resistance25 5.10.1 Principle25 5.10.2 Apparatus.25 5.10.3 Preparation for conditioning
18、 of test piece 25 5.10.4 Procedure.26 5.11 Determination of the electrical insulation26 5.12 Determination of insulation against heat.26 5.12.1 Apparatus.26 5.12.2 Preparation of test piece.26 5.12.3 Test procedure.27 5.13 Determination of insulation against cold.27 5.13.1Apparatus27 5.13.2 Preparat
19、ion of test piece.28 5.13.3 Test procedure.28 EN ISO 20344:2004 (E) 3 5.14 Determination of energy absorption of seat region29 5.14.1 Apparatus.29 5.14.2 Procedure.30 5.15 Determination of resistance to water for whole footwear31 5.15.1 Trough test.31 5.15.2 Machine method 32 5.15.2.1 Principle.32 5
20、.15.2.2 Apparatus32 5.16 Determination of impact resistance of metatarsal protective device .38 5.16.1 Apparatus.38 5.16.2 Preparation of test piece.41 5.16.3 Procedure.41 5.16.4 Test results.42 5.17 Determination of the shock absorption capacity of ankle protection materials incorporated into the u
21、pper 42 5.17.1 Principle42 5.17.2 Apparatus.43 5.17.2.5 Templates44 5.17.2.6 Sampling44 5.17.3 Preparation of test pieces.45 5.17.4 Conditioning.45 5.17.5 Procedure.45 5.17.6 Test report45 6. Test methods for upper, lining and tongue .46 6.1 Determination of thickness of upper46 6.2 Measurement of t
22、he height of the upper46 6.2.1 Preparation of test piece.46 6.2.2 Measurement46 6.3 Determination of tear strength of upper, lining and/or tongue46 6.4 Determination of the tensile properties of upper material.47 6.5 Determination of upper flexing resistance.47 6.6 Determination of water vapour perm
23、eability .47 6.6.1 Principle47 6.6.2 Apparatus.47 6.6.3 Preparation of test piece.50 6.6.4 Test procedure.51 6.6.5 Calculation and expression of results.52 6.7 Determination of water vapour absorption52 6.7.1 Principle52 6.7.2 Apparatus.52 6.7.3 Preparation of test piece.53 6.7.4 Test procedure.53 6
24、.7.5 Calculation and expression of results.54 6.8 Determination of water vapour coefficient.54 6.9 Determination of pH value.54 6.10 Determination of resistance to hydrolysis of upper.54 6.11 Determination of chromium VI content54 6.11.1 Principle54 6.11.2 Chemicals.55 6.11.3 Apparatus.55 6.11.4 Pro
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 20344 2004
链接地址:https://www.31doc.com/p-3746932.html